Ich habe einen Root-Server bei 1und1 seit einiger Zeit der auch problemlos läuft. Heute Morgen war er dann offline und über das Rescue-System machte ich einen Platten-Check, so wie schon 2-3 mal in den vergangenen Monaten. Dann wollte ich wieder im normalen System booten aber nichts passiert, der Server fährt nicht hoch :(
Nun bin ich eigentlich ein Noob und weiss überhaupt nicht was ich machen soll. Auf dem Server sind wichtige Daten, insbesondere Mysql-Tabellen von diversen Webseiten.
Kann mir jemand helfen den Server wieder online zu bringen, oder dass ich zumindest an meine Daten rankomme?
Ich würde auch einen Fachmann bezahlen... :(
Hier das Log der Seriellen Konsole:
Code: Select all
LILO 22.3.4 boot:
Loading lxser...............................
BIOS data check successful
Bootdata ok (command line is auto BOOT_IMAGE=lxser ro root=901 console=tty0 console=ttyS0,57600 panic=30)
Linux version 2.6.11.4-21.13-default (geeko@buildhost) (gcc version 3.3.5 20050117 (prerelease) (SUSE Linux)) #1 Mon Jul 17 09:21:59 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007dee0000 (usable)
BIOS-e820: 000000007dee0000 - 000000007deef000 (ACPI data)
BIOS-e820: 000000007deef000 - 000000007df00000 (ACPI NVS)
BIOS-e820: 000000007df00000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:15 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 20, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Checking aperture...
CPU 0: aperture @ f8000000 size 64 MB
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=lxser ro root=901 console=tty0 console=ttyS0,57600 panic=30
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 1.193182 MHz PIT timer.
time.c: Detected 2200.123 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Memory: 2027072k/2063232k available (2168k kernel code, 35592k reserved, 1160k data, 168k init)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: AMD Athlon(tm) 64 Processor 3500+ stepping 02
not found!
Using local APIC NMI watchdog using perfctr0
Using local APIC timer interrupts.
Detected 12.500 MHz APIC timer.
NET: Registered protocol family 16
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5
EHCI early BIOS handoff failed (BIOS bug ?)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: Device [PS2M] status [00000008]: functional but not present; setting present
ACPI: Device [FDC] status [00000008]: functional but not present; setting present
ACPI: Device [LPT] status [00000008]: functional but not present; setting present
ACPI: Device [ECP] status [00000008]: functional but not present; setting present
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca)
PCI-DMA: Disabling IOMMU.
Simple Boot Flag at 0x69 set to 0x80
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1157829506.364:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
Linux agpgart interface v0.100 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
loop: loaded (max 8 devices)
mice: PS/2 mouse device common for all mice
input: PC Speaker
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
ACPI wakeup devices:
PCI0 PCIE PCIX PCE0 USB0 USB1 USB2 USB3 LAN AC97 MC97 KEYB PS2M COM1
ACPI: (supports S0 S1 S3 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT2-fs: unable to read superblock
MINIX-fs: unable to read superblock
isofs_fill_super: bread failed, dev=md1, iso_blknum=16, block=32
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(9,1)
<0>Rebooting in 30 seconds..machine restart