[Gelöst] FreeBSD IPv6 pingt nicht mehr.

Apache, Lighttpd, nginx, Cherokee
User avatar
Proteus
Posts: 289
Joined: 2013-04-14 05:08
Location: Holzgerlingen
 

[Gelöst] FreeBSD IPv6 pingt nicht mehr.

Post by Proteus »

Hallo, leidiges Thema Webtropia und IPv6. Bitte in den entsprechenden Forenbreich verschieben, ich habe mich mit Webserver wohl vertan.

[edit]

Durch den ganzen Hickhack habe ich vergessen zu fragen bzw. sagen was ich eigentlich wollte. Ich habe es erst bemerkt als ich mein Zertifikat überprüfen lies. Das mein Server nicht mehr über die IPv6 Adressen erreichbar ist. Und nun brauche ich Hilfe überhaupt erfassen zu können was da los ist, Hilfe. Mein Server "Webtropia" ist nicht einfach mal so, nicht wie gewohnt, einfach mal die IPv6 Adressen in die rc.conf einzutragen. Sondern man muss bei diesen Servern die Gateway-MAC Adresse eintragen, siehe rc.conf. Was ich nicht so ganz verstehe, ist das alles normal zu sein scheint, und ich habe in den letzten Wochen nichts verändert. Ich führe halt einmal täglich den update-port aus, siehe RooService HowTo.

Alter Beitrag, ich denke aber "vielleicht" das selbe Problem?
viewtopic.php?f=148&t=54422&hilit=proteus+ipv6

Das kann irgendwie auch nicht stimmen.
bild1 rdns.png
Und wenn ich es so mache wie auf dem Bild wird die Einstellung nicht übernommen. ::1 oder :0001 versucht.
bild2 rdns.png

Code: Select all

root@root:~ # ping6 ipv6.google.com
PING6(56=40+8+8 bytes) 2001:4ba0:ffa4:26f::1 --> 2a00:1450:4001:81f::200e

Code: Select all

root@root:~ # ping6 rootforum.org
PING6(56=40+8+8 bytes) 2001:4ba0:ffa4:26f::1 --> 2a01:4f8:200:1468::5
Dann wurde ich skeptisch:

Code: Select all

root@root:~ # ping6 rootforum.de
PING6(56=40+8+8 bytes) 2001:4ba0:ffa4:26f::1 --> 2001:4ba0:ffa4:26f::1
16 bytes from 2001:4ba0:ffa4:26f::1, icmp_seq=0 hlim=64 time=0.037 ms
16 bytes from 2001:4ba0:ffa4:26f::1, icmp_seq=1 hlim=64 time=0.029 ms
16 bytes from 2001:4ba0:ffa4:26f::1, icmp_seq=2 hlim=64 time=0.022 ms
16 bytes from 2001:4ba0:ffa4:26f::1, icmp_seq=3 hlim=64 time=0.029 ms
^C
--- rootforum.de.root.phoenix-blog.de ping6 statistics ---
4 packets transmitted, 4 packets received, 0.0% packet loss
round-trip min/avg/max/std-dev = 0.022/0.029/0.037/0.005 ms
Meine Aktuelle rc.conf:

Code: Select all

##########################################################################################################################
### Important initial Boot-time options ########################################
##########################################################################################################################
#kern_securelevel_enable="YES"
#kern_securelevel="1"
fsck_y_enable="YES"
dumpdev="AUTO"
zfs_enable="YES"

##########################################################################################################################
### IPv4 Network configuration sub-section ###########################
##########################################################################################################################
hostname="root.phoenix-blog.de"
defaultrouter="89.163.140.1"
ipv6_static_routes="hostroute gateway"
ipv6_route_hostroute="2001:4ba0:ffa4:1:beef::1 -prefixlen 128 -interface re0"
ipv6_route_gateway="default 2001:4ba0:ffa4:1:beef::1"
static_ndp_pairs="gateway"
static_ndp_gateway="2001:4ba0:ffa4:1:beef::1 28:92:4a:cd:08:18"

ifconfig_re0="inet 89.163.140.251 netmask 255.255.255.0"
ifconfig_re0_ipv6="inet6 2001:4ba0:ffa4:026f::1 prefixlen 64"
ifconfig_re0_aliases="\
inet 37.157.255.52 netmask 255.255.255.255 \
inet6 2001:4ba0:ffa4:026f::2 prefixlen 64 \
inet6 2001:4ba0:ffa4:026f::3 prefixlen 64 \
inet6 2001:4ba0:ffa4:026f::4 prefixlen 64"

##########################################################################################################################
### System console options ###############################################################
##########################################################################################################################
keymap="de.acc"

##########################################################################################################################
### Mail Transfer Agent (MTA) options ##########################################
##########################################################################################################################
sendmail_enable="NO"
sendmail_cert_create="NO"
sendmail_submit_enable="NO"
sendmail_outbound_enable="NO"
sendmail_msp_queue_enable="NO"

##########################################################################################################################
### Miscellaneous administrative options #############################
##########################################################################################################################
syslogd_flags="-ss"
clear_tmp_enable="YES"
cron_flags="$cron_flags -j 0 -J 0 -m root"

##########################################################################################################################
### Jail Configuration #####################################################################
##########################################################################################################################
##########################################################################################################################
### System services options ##############################################################
##########################################################################################################################
php_fpm_enable="YES"
nginx_enable="YES"
dovecot_enable="YES"
postfix_enable="YES"
pureftpd_enable="yes"
sshd_enable="YES"
sshd_rsa1_enable="NO"
sshd_dsa_enable="NO"
microcode_update_enable="YES"
mysql_enable="YES"
mysql_limits="YES"
mysql_dbdir="/var/db/mysql"
mysql_optfile="/usr/local/etc/my.cnf"
"EOF"

Code: Select all

root@root:~ # netstat -rn -f inet6
Routing tables

Internet6:
Destination                       Gateway                       Flags     Netif Expire
::/96                             ::1                           UGRS        lo0
default                           2001:4ba0:ffa4:1:beef::1      UGS         re0
::1                               link#2                        UH          lo0
::ffff:0.0.0.0/96                 ::1                           UGRS        lo0
2001:4ba0:ffa4:1:beef::1          d8:cb:8a:9b:5b:d3             UHS         re0
2001:4ba0:ffa4:26f::/64           link#1                        U           re0
2001:4ba0:ffa4:26f::1             link#1                        UHS         lo0
2001:4ba0:ffa4:26f::2             link#1                        UHS         lo0
2001:4ba0:ffa4:26f::3             link#1                        UHS         lo0
2001:4ba0:ffa4:26f::4             link#1                        UHS         lo0
fe80::/10                         ::1                           UGRS        lo0
fe80::%re0/64                     link#1                        U           re0
fe80::dacb:8aff:fe9b:5bd3%re0     link#1                        UHS         lo0
fe80::%lo0/64                     link#2                        U           lo0
fe80::1%lo0                       link#2                        UHS         lo0
ff02::/16                         ::1                           UGRS        lo0
root@root:~ #

Code: Select all

root@root:~ # ifconfig -u
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
        ether d8:cb:8a:9b:5b:d3
        inet 89.163.140.251 netmask 0xffffff00 broadcast 89.163.140.255
        inet 37.157.255.52 netmask 0xffffffff broadcast 37.157.255.52
        inet6 fe80::dacb:8aff:fe9b:5bd3%re0 prefixlen 64 scopeid 0x1
        inet6 2001:4ba0:ffa4:26f::1 prefixlen 64
        inet6 2001:4ba0:ffa4:26f::2 prefixlen 64
        inet6 2001:4ba0:ffa4:26f::3 prefixlen 64
        inet6 2001:4ba0:ffa4:26f::4 prefixlen 64
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
        inet 127.0.0.1 netmask 0xff000000
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        groups: lo
Jetzt komme ich natürlich nicht weiter. Mein Webserver ist über IPv6 nicht erreichbar. Und auch Putty ist nicht darüber erreichbar.

Auch beim Support von Webtropia habe ich angefragt, ob sich vielleicht die Gateway-MAC Adresse vielleicht geändert hat. Leider habe ich bis jetzt noch keine Antwort erhalten, wobei ich davon ausgehe, dass es funktioniert.
Last edited by Proteus on 2017-07-10 15:37, edited 6 times in total.
LG
Proti

"Die Kamera wird bei hohen ISO Werten aber rauschen. Nichts ahnend hielt er sich die Kamera ans Ohr!"
Top
User avatar
Proteus
Posts: 289
Joined: 2013-04-14 05:08
Location: Holzgerlingen
 

Re: IPv6 pingt auf google nicht?

Post by Proteus »

Hier noch meine dmesg

Code: Select all

Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-RELEASE-p10 #0: Wed Jun 21 11:07:05 CEST 2017
    root@root:/usr/obj/usr/src/sys/MYKERNEL amd64
FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0)
[1] VT(vga): resolution 640x480
[1] can't re-use a leaf (geom_mirror)!
[1] module_register: cannot register g_mirror from kernel; already loaded from geom_mirror.ko
[1] Module g_mirror failed to register: 17
[1] module_register: cannot register accf_data from kernel; already loaded from accf_data.ko
[1] Module accf_data failed to register: 17
[1] module_register: cannot register accf_dns from kernel; already loaded from accf_dns.ko
[1] Module accf_dns failed to register: 17
[1] module_register: cannot register accf_http from kernel; already loaded from accf_http.ko
[1] Module accf_http failed to register: 17
[1] CPU: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz (4000.09-MHz K8-class CPU)
[1]   Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
[1]   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
[1]   Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
[1]   AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
[1]   AMD Features2=0x21<LAHF,ABM>
[1]   Structured Extended Features=0x2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG>
[1]   XSAVE Features=0x1<XSAVEOPT>
[1]   VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
[1]   TSC: P-state invariant, performance statistics
[1] real memory  = 34359738368 (32768 MB)
[1] avail memory = 33153069056 (31617 MB)
[1] Event timer "LAPIC" quality 600
[1] ACPI APIC Table: <ALASKA A M I>
[1] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
[1] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
[1] random: unblocking device.
[1] ioapic0 <Version 2.0> irqs 0-23 on motherboard
[1] netisr_init: forcing maxthreads to 1 and bindthreads to 0 for device polling
[1] random: entropy device external interface
[1] module_register_init: MOD_LOAD (vesa, 0xffffffff80ec7880, 0) error 19
[1] kbd1 at kbdmux0
[1] random: registering fast source Intel Secure Key RNG
[1] random: fast provider: "Intel Secure Key RNG"
[1] netmap: loaded module
[1] module_register_init: MOD_LOAD (accf_data, 0xffffffff809ed5d0, 0xffffffff822580d8) error 17
[1] module_register_init: MOD_LOAD (accf_dns, 0xffffffff809ed5d0, 0xffffffff8225a160) error 17
[1] module_register_init: MOD_LOAD (accf_http, 0xffffffff809ed5d0, 0xffffffff8225c800) error 17
[1] vtvga0: <VT VGA driver> on motherboard
[1] smbios0: <System Management BIOS> at iomem 0xf04d0-0xf04ee on motherboard
[1] smbios0: Version: 2.8, BCD Revision: 2.7
[1] cryptosoft0: <software crypto> on motherboard
[1] aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
[1] acpi0: <ALASKA A M I> on motherboard
[1] acpi0: Power Button (fixed)
[1] cpu0: <ACPI CPU> on acpi0
[1] cpu1: <ACPI CPU> on acpi0
[1] cpu2: <ACPI CPU> on acpi0
[1] cpu3: <ACPI CPU> on acpi0
[1] cpu4: <ACPI CPU> on acpi0
[1] cpu5: <ACPI CPU> on acpi0
[1] cpu6: <ACPI CPU> on acpi0
[1] cpu7: <ACPI CPU> on acpi0
[1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
[1] Timecounter "HPET" frequency 14318180 Hz quality 950
[1] Event timer "HPET" frequency 14318180 Hz quality 550
[1] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
[1] atrtc0: Warning: Couldn't map I/O.
[1] Event timer "RTC" frequency 32768 Hz quality 0
[1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
[1] Timecounter "i8254" frequency 1193182 Hz quality 0
[1] Event timer "i8254" frequency 1193182 Hz quality 100
[1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
[1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[1] pcib0: _OSC returned error 0x10
[1] pci0: <ACPI PCI bus> on pcib0
[1] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
[1] vgapci0: Boot video device
[1] pci0: <multimedia, HDA> at device 3.0 (no driver attached)
[1] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7d00000-0xf7d0ffff irq 16 at device 20.0 on pci0
[1] xhci0: 32 bytes context size, 64-bit DMA
[1] xhci0: Port routing mask set to 0xffffffff
[1] usbus0 on xhci0
[1] pci0: <simple comms> at device 22.0 (no driver attached)
[1] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7d1c000-0xf7d1c3ff irq 16 at device 26.0 on pci0
[1] usbus1: EHCI version 1.0
[1] usbus1 on ehci0
[1] pci0: <multimedia, HDA> at device 27.0 (no driver attached)
[1] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
[1] pcib1: [GIANT-LOCKED]
[1] pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
[1] pci1: <ACPI PCI bus> on pcib2
[1] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xf7c00000-0xf7c00fff,0xf0000000-0xf0003fff irq 18 at device 0.0 on pci1
[1] re0: Using 1 MSI-X message
[1] re0: Chip rev. 0x4c000000
[1] re0: MAC rev. 0x00000000
[1] miibus0: <MII bus> on re0
[1] rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0
[1] rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
[1] re0: Using defaults for TSO: 65518/35/2048
[1] re0: Ethernet address: d8:cb:8a:9b:5b:d3
[1] re0: netmap queues/slots: TX 1/256, RX 1/256
[1] pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
[1] pci2: <ACPI PCI bus> on pcib3
[1] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci2
[1] pci3: <ACPI PCI bus> on pcib4
[1] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7d1b000-0xf7d1b3ff irq 23 at device 29.0 on pci0
[1] usbus2: EHCI version 1.0
[1] usbus2 on ehci1
[1] isab0: <PCI-ISA bridge> at device 31.0 on pci0
[1] isa0: <ISA bus> on isab0
[1] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7d1a000-0xf7d1a7ff irq 19 at device 31.2 on pci0
[1] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
[1] ahcich0: <AHCI channel> at channel 0 on ahci0
[1] ahcich1: <AHCI channel> at channel 1 on ahci0
[1] ahciem0: <AHCI enclosure management bridge> on ahci0
[1] ichsmb0: <Intel Lynx Point SMBus controller> port 0xf040-0xf05f mem 0xf7d19000-0xf7d190ff irq 18 at device 31.3 on pci0
[1] smbus0: <System Management Bus> on ichsmb0
[1] smb0: <SMBus generic I/O> on smbus0
[1] acpi_button0: <Power Button> on acpi0
[1] acpi_tz0: <Thermal Zone> on acpi0
[1] acpi_tz1: <Thermal Zone> on acpi0
[1] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
[1] ichwd0: <Intel Lynx Point watchdog timer> on isa0
[1] orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff on isa0
[1] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
[1] atkbd0: <AT Keyboard> irq 1 on atkbdc0
[1] kbd0 at atkbd0
[1] atkbd0: [GIANT-LOCKED]
[1] coretemp0: <CPU On-Die Thermal Sensors> on cpu0
[1] est0: <Enhanced SpeedStep Frequency Control> on cpu0
[1] coretemp1: <CPU On-Die Thermal Sensors> on cpu1
[1] est1: <Enhanced SpeedStep Frequency Control> on cpu1
[1] coretemp2: <CPU On-Die Thermal Sensors> on cpu2
[1] est2: <Enhanced SpeedStep Frequency Control> on cpu2
[1] coretemp3: <CPU On-Die Thermal Sensors> on cpu3
[1] est3: <Enhanced SpeedStep Frequency Control> on cpu3
[1] coretemp4: <CPU On-Die Thermal Sensors> on cpu4
[1] est4: <Enhanced SpeedStep Frequency Control> on cpu4
[1] coretemp5: <CPU On-Die Thermal Sensors> on cpu5
[1] est5: <Enhanced SpeedStep Frequency Control> on cpu5
[1] coretemp6: <CPU On-Die Thermal Sensors> on cpu6
[1] est6: <Enhanced SpeedStep Frequency Control> on cpu6
[1] coretemp7: <CPU On-Die Thermal Sensors> on cpu7
[1] est7: <Enhanced SpeedStep Frequency Control> on cpu7
[1] The GEOM class MIRROR is already loaded.
[1] usbus0: 5.0Gbps Super Speed USB v3.0
[1] ZFS filesystem version: 5
[1] ZFS storage pool version: features support (5000)
[1] Timecounters tick every 1.000 msec
[1] nvme cam probe device init
[1] usbus1: 480Mbps High Speed USB v2.0
[1] usbus2: 480Mbps High Speed USB v2.0
[1] ugen0.1: <0x8086> at usbus0
[1] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[1] ugen1.1: <Intel> at usbus1
[1] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
[1] ugen2.1: <Intel> at usbus2
[1] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
[1] ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
[1] ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
[1] ses0: SEMB SES Device
[1] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
[1] ada0: <TOSHIBA DT01ACA100 MS2OA750> ATA8-ACS SATA 3.x device
[1] ada0: Serial Number 85PBV7YFS
[1] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
[1] ada0: Command Queueing enabled
[1] ada0: 953869MB (1953525168 512 byte sectors)
[1] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
[1] ada1: <TOSHIBA DT01ACA100 MS2OA750> ATA8-ACS SATA 3.x device
[1] ada1: Serial Number 45LJRUUNS
[1] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
[1] ada1: Command Queueing enabled
[1] ada1: 953869MB (1953525168 512 byte sectors)
[1] SMP: AP CPU #1 Launched!
[1] SMP: AP CPU #7 Launched!
[1] SMP: AP CPU #3 Launched!
[1] SMP: AP CPU #2 Launched!
[1] SMP: AP CPU #5 Launched!
[1] SMP: AP CPU #4 Launched!
[1] SMP: AP CPU #6 Launched!
[1] Timecounter "TSC-low" frequency 2000042794 Hz quality 1000
[1] Trying to mount root from zfs:zroot/ROOT/default []...
[1] Root mount waiting for: usbus2 usbus1 usbus0
[2] uhub1: 2 ports with 2 removable, self powered
[2] uhub2: 2 ports with 2 removable, self powered
[2] uhub0: 21 ports with 21 removable, self powered
[2] Root mount waiting for: usbus2 usbus1 usbus0
[2] ugen0.2: <GASIA> at usbus0
[2] ukbd0: <GASIA PS2toUSB Adapter, class 0/0, rev 1.10/2.01, addr 1> on usbus0
[2] kbd2 at ukbd0
[2] ums0: <GASIA PS2toUSB Adapter, class 0/0, rev 1.10/2.01, addr 1> on usbus0
[2] ums0: 5 buttons and [XYZ] coordinates ID=1
[2] ugen1.2: <vendor 0x8087> at usbus1
[2] uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1
[2] ugen2.2: <vendor 0x8087> at usbus2
[2] uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2
[3] uhub3: 6 ports with 6 removable, self powered
[3] uhub4: 6 ports with 6 removable, self powered
[4] Setting hostuuid: 00000000-0000-0000-0000-d8cb8a9b5bd3.
[4] Setting hostid: 0x5c933872.
[4] No suitable dump device was found.
[4] Starting file system checks:
[5] Mounting local filesystems:.
[6] ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/dovecot /usr/local/lib/mysql /usr/local/lib/mysql/plugin /usr/local/lib/perl5/5.24/mach/CORE
[6] 32-bit compatibility ldconfig path: /usr/lib32
[6] Setting hostname: root.
[6] Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
[6] Feeding entropy: .
[7] re0: link state changed to DOWN
[9] Starting Network: lo0 re0.
[9] lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
[9] 	options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
[9] 	inet6 ::1 prefixlen 128 
[9] 	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 
[9] 	inet 127.0.0.1 netmask 0xff000000 
[9] 	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
[9] 	groups: lo 
[9] re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
[9] 	options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
[9] 	ether d8:cb:8a:9b:5b:d3
[9] 	inet 89.163.140.251 netmask 0xffffff00 broadcast 89.163.140.255 
[9] 	inet 37.157.255.52 netmask 0xffffffff broadcast 37.157.255.52 
[9] 	inet6 fe80::dacb:8aff:fe9b:5bd3%re0 prefixlen 64 scopeid 0x1 
[9] 	inet6 2001:4ba0:ffa4:26f::2 prefixlen 64 
[9] 	inet6 2001:4ba0:ffa4:26f::3 prefixlen 64 
[9] 	inet6 2001:4ba0:ffa4:26f::4 prefixlen 64 
[9] 	inet6 2001:4ba0:ffa4:26f::5 prefixlen 64 
[9] 	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
[9] 	media: Ethernet autoselect (none)
[9] 	status: no carrier
[9] Starting devd.
[9] Configuring vt: keymap.
[9] Starting ums0 moused.
[10] add host 127.0.0.1: gateway lo0 fib 0: route already in table
[10] add host 127.0.0.1: gateway lo0 fib 1: route already in table
[10] add host 127.0.0.1: gateway lo0 fib 2: route already in table
[10] add host 127.0.0.1: gateway lo0 fib 3: route already in table
[10] add host 127.0.0.1: gateway lo0 fib 4: route already in table
[10] add host 127.0.0.1: gateway lo0 fib 5: route already in table
[10] add host 127.0.0.1: gateway lo0 fib 6: route already in table
[10] add host 127.0.0.1: gateway lo0 fib 7: route already in table
[10] add host 127.0.0.1: gateway lo0 fib 8: route already in table
[10] add host 127.0.0.1: gateway lo0 fib 9: route already in table
[10] add host 127.0.0.1: gateway lo0 fib 10: route already in table
[10] add host 127.0.0.1: gateway lo0 fib 11: route already in table
[10] add host 127.0.0.1: gateway lo0 fib 12: route already in table
[10] add host 127.0.0.1: gateway lo0 fib 13: route already in table
[10] add host 127.0.0.1: gateway lo0 fib 14: route already in table
[10] add host 127.0.0.1: gateway lo0 fib 15: route already in table
[10] add net default: gateway 89.163.140.1 fib 0
[10] add host ::1: gateway lo0 fib 0: route already in table
[10] add host ::1: gateway lo0 fib 1: route already in table
[10] add host ::1: gateway lo0 fib 2: route already in table
[10] add host ::1: gateway lo0 fib 3: route already in table
[10] add host ::1: gateway lo0 fib 4: route already in table
[10] add host ::1: gateway lo0 fib 5: route already in table
[10] add host ::1: gateway lo0 fib 6: route already in table
[10] add host ::1: gateway lo0 fib 7: route already in table
[10] add host ::1: gateway lo0 fib 8: route already in table
[10] add host ::1: gateway lo0 fib 9: route already in table
[10] add host ::1: gateway lo0 fib 10: route already in table
[10] add host ::1: gateway lo0 fib 11: route already in table
[10] add host ::1: gateway lo0 fib 12: route already in table
[10] add host ::1: gateway lo0 fib 13: route already in table
[10] add host ::1: gateway lo0 fib 14: route already in table
[10] add host ::1: gateway lo0 fib 15: route already in table
[10] add net fe80::: gateway ::1 fib 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
[10] add net ff02::: gateway ::1 fib 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
[10] add net ::ffff:0.0.0.0: gateway ::1 fib 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
[10] add net ::0.0.0.0: gateway ::1 fib 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
[10] add host 2001:4ba0:ffa4:1:beef::1: gateway re0 fib 0
[10] add net default: gateway 2001:4ba0:ffa4:1:beef::1 fib 0
[10] Binding static NDP pair(s): gateway.
[10] Creating and/or trimming log files.
[10] Starting syslogd.
[10] Clearing /tmp.
[10] Starting pureftpd.
[10] Jul  9 12:47:45 root pure-ftpd: (?@?) [ERROR] Unable to find the 'ftp' account
[10] Updating motd:.
[10] Mounting late filesystems:.
[11] Starting dovecot.
[11] re0: link state changed to UP
[11] postfix/postfix-script: starting the Postfix mail system
[11] Performing sanity check on php-fpm configuration:
[13] [09-Jul-2017 12:47:48] NOTICE: configuration file /usr/local/etc/php-fpm.conf test is successful

[13] Starting php_fpm.
[13] Performing sanity check on nginx configuration:
[14] nginx: the configuration file /usr/local/etc/nginx/nginx.conf syntax is ok
[14] nginx: configuration file /usr/local/etc/nginx/nginx.conf test is successful
[14] Starting nginx.
[14] Starting mysql.
[16] Updating cpucodes...
[16] /usr/local/share/cpucontrol/m32306c3_00000022.fw: updating cpu /dev/cpuctl0 from rev 0x19 to rev 0x22... done.
[16] /usr/local/share/cpucontrol/m32306c3_00000022.fw: updating cpu /dev/cpuctl2 from rev 0x19 to rev 0x22... done.
[16] /usr/local/share/cpucontrol/m32306c3_00000022.fw: updating cpu /dev/cpuctl4 from rev 0x19 to rev 0x22... done.
[16] /usr/local/share/cpucontrol/m32306c3_00000022.fw: updating cpu /dev/cpuctl6 from rev 0x19 to rev 0x22... done.
[16] Done.
[16] Configuring vt: keymap blanktime.
[16] Performing sanity check on sshd configuration.
[17] Starting sshd.
[17] Starting cron.
[17] sysctl: unknown oid 'net.inet.ip.rtmaxcache' at line 16
[17] Starting background file system checks in 60 seconds.
[17] 
[17] Sun Jul  9 12:47:51 CEST 2017
[24] Jul  9 12:47:58 root sshd[26703]: fatal: Unable to negotiate with 123.183.209.134 port 14738: no matching MAC found. Their offer: hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96,hmac-ripemd160,hmac-ripemd160@openssh.com [preauth]
[45] Jul  9 12:48:20 root sshd[27590]: fatal: Unable to negotiate with 123.183.209.134 port 27961: no matching MAC found. Their offer: hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96,hmac-ripemd160,hmac-ripemd160@openssh.com [preauth]
[49] Jul  9 12:48:24 root sshd[28541]: fatal: Unable to negotiate with 116.31.116.48 port 36839: no matching MAC found. Their offer: hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96,hmac-ripemd160,hmac-ripemd160@openssh.com [preauth]
[78] Jul  9 12:48:52 root sshd[29568]: fatal: Unable to negotiate with 123.183.209.134 port 12190: no matching MAC found. Their offer: hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96,hmac-ripemd160,hmac-ripemd160@openssh.com [preauth]
[109] Jul  9 12:49:23 root sshd[30946]: fatal: Unable to negotiate with 123.183.209.134 port 50444: no matching MAC found. Their offer: hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96,hmac-ripemd160,hmac-ripemd160@openssh.com [preauth]
[131] Jul  9 12:49:45 root su: admin to root on /dev/pts/0
[146] Jul  9 12:50:00 root sshd[36680]: fatal: Unable to negotiate with 123.183.209.134 port 42167: no matching MAC found. Their offer: hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96,hmac-ripemd160,hmac-ripemd160@openssh.com [preauth]
[178] Jul  9 12:50:32 root sshd[38080]: fatal: Unable to negotiate with 123.183.209.134 port 43796: no matching MAC found. Their offer: hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96,hmac-ripemd160,hmac-ripemd160@openssh.com [preauth]
[211] Jul  9 12:51:05 root sshd[40003]: fatal: Unable to negotiate with 123.183.209.134 port 34679: no matching MAC found. Their offer: hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96,hmac-ripemd160,hmac-ripemd160@openssh.com [preauth]
[245] Jul  9 12:51:39 root sshd[42001]: fatal: Unable to negotiate with 123.183.209.134 port 32220: no matching MAC found. Their offer: hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96,hmac-ripemd160,hmac-ripemd160@openssh.com [preauth]
[290] Jul  9 12:52:24 root sshd[42587]: fatal: Unable to negotiate with 123.183.209.134 port 14785: no matching MAC found. Their offer: hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96,hmac-ripemd160,hmac-ripemd160@openssh.com [preauth]
[306] Jul  9 12:52:40 root sshd[43538]: fatal: Unable to negotiate with 123.183.209.134 port 47125: no matching MAC found. Their offer: hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96,hmac-ripemd160,hmac-ripemd160@openssh.com [preauth]
[342] Jul  9 12:53:17 root sshd[44552]: fatal: Unable to negotiate with 123.183.209.134 port 42516: no matching MAC found. Their offer: hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96,hmac-ripemd160,hmac-ripemd160@openssh.com [preauth]
[368] Jul  9 12:53:43 root sshd[45411]: fatal: Unable to negotiate with 116.31.116.48 port 58775: no matching MAC found. Their offer: hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96,hmac-ripemd160,hmac-ripemd160@openssh.com [preauth]
[386] Jul  9 12:54:01 root sshd[45980]: fatal: Unable to negotiate with 123.183.209.134 port 39739: no matching MAC found. Their offer: hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96,hmac-ripemd160,hmac-ripemd160@openssh.com [preauth]
[399] Jul  9 12:54:14 root su: BAD SU admin to root on /dev/pts/0
[469] Jul  9 12:55:24 root sshd[57718]: fatal: Unable to negotiate with 123.183.209.134 port 40301: no matching MAC found. Their offer: hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96,hmac-ripemd160,hmac-ripemd160@openssh.com [preauth]
[492] Jul  9 12:55:47 root su: admin to root on /dev/pts/0
[513] Jul  9 12:56:07 root sshd[60025]: fatal: Unable to negotiate with 123.183.209.134 port 64246: no matching MAC found. Their offer: hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96,hmac-ripemd160,hmac-ripemd160@openssh.com [preauth]
[571] Jul  9 12:57:06 root sshd[61368]: fatal: Unable to negotiate with 123.183.209.134 port 30300: no matching MAC found. Their offer: hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96,hmac-ripemd160,hmac-ripemd160@openssh.com [preauth]
[601] Jul  9 12:57:35 root sshd[64964]: fatal: Unable to negotiate with 123.183.209.134 port 61728: no matching MAC found. Their offer: hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96,hmac-ripemd160,hmac-ripemd160@openssh.com [preauth]
[652] Jul  9 12:58:27 root sshd[65721]: fatal: Unable to negotiate with 116.31.116.48 port 39421: no matching MAC found. Their offer: hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96,hmac-ripemd160,hmac-ripemd160@openssh.com [preauth]
[662] Jul  9 12:58:37 root sshd[66981]: fatal: Unable to negotiate with 123.183.209.134 port 24630: no matching MAC found. Their offer: hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96,hmac-ripemd160,hmac-ripemd160@openssh.com [preauth]
[694] Jul  9 12:59:08 root sshd[68645]: fatal: Unable to negotiate with 123.183.209.134 port 55120: no matching MAC found. Their offer: hmac-sha1,hmac-sha1-96,hmac-md5,hmac-md5-96,hmac-ripemd160,hmac-ripemd160@openssh.com [preauth]
[712] Jul  9 12:59:26 root reboot: rebooted by admin
[712] Jul  9 12:59:26 root syslogd: exiting on signal 15
[719] Waiting (max 60 seconds) for system process `vnlru' to stop... done
[719] Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
[720] Waiting (max 60 seconds) for system process `syncer' to stop... 
[720] Syncing disks, vnodes remaining... 0 0 0 0 0 done
[724] All buffers synced.
[724] Uptime: 12m4s
[724] re0: link state changed to DOWN
[741] re0: establishing a link failed, WOL may not work!Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-RELEASE-p10 #0: Wed Jun 21 11:07:05 CEST 2017
    root@root:/usr/obj/usr/src/sys/MYKERNEL amd64
FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0)
[1] VT(vga): resolution 640x480
[1] can't re-use a leaf (geom_mirror)!
[1] module_register: cannot register g_mirror from kernel; already loaded from geom_mirror.ko
[1] Module g_mirror failed to register: 17
[1] module_register: cannot register accf_data from kernel; already loaded from accf_data.ko
[1] Module accf_data failed to register: 17
[1] module_register: cannot register accf_dns from kernel; already loaded from accf_dns.ko
[1] Module accf_dns failed to register: 17
[1] module_register: cannot register accf_http from kernel; already loaded from accf_http.ko
[1] Module accf_http failed to register: 17
[1] CPU: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz (4000.07-MHz K8-class CPU)
[1]   Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
[1]   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
[1]   Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
[1]   AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
[1]   AMD Features2=0x21<LAHF,ABM>
[1]   Structured Extended Features=0x2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG>
[1]   XSAVE Features=0x1<XSAVEOPT>
[1]   VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
[1]   TSC: P-state invariant, performance statistics
[1] real memory  = 34359738368 (32768 MB)
[1] avail memory = 33153069056 (31617 MB)
[1] Event timer "LAPIC" quality 600
[1] ACPI APIC Table: <ALASKA A M I>
[1] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
[1] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
[1] random: unblocking device.
[1] ioapic0 <Version 2.0> irqs 0-23 on motherboard
[1] netisr_init: forcing maxthreads to 1 and bindthreads to 0 for device polling
[1] random: entropy device external interface
[1] module_register_init: MOD_LOAD (vesa, 0xffffffff80ec7880, 0) error 19
[1] kbd1 at kbdmux0
[1] random: registering fast source Intel Secure Key RNG
[1] random: fast provider: "Intel Secure Key RNG"
[1] netmap: loaded module
[1] module_register_init: MOD_LOAD (accf_data, 0xffffffff809ed5d0, 0xffffffff822580d8) error 17
[1] module_register_init: MOD_LOAD (accf_dns, 0xffffffff809ed5d0, 0xffffffff8225a160) error 17
[1] module_register_init: MOD_LOAD (accf_http, 0xffffffff809ed5d0, 0xffffffff8225c800) error 17
[1] vtvga0: <VT VGA driver> on motherboard
[1] smbios0: <System Management BIOS> at iomem 0xf04d0-0xf04ee on motherboard
[1] smbios0: Version: 2.8, BCD Revision: 2.7
[1] cryptosoft0: <software crypto> on motherboard
[1] aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
[1] acpi0: <ALASKA A M I> on motherboard
[1] acpi0: Power Button (fixed)
[1] cpu0: <ACPI CPU> on acpi0
[1] cpu1: <ACPI CPU> on acpi0
[1] cpu2: <ACPI CPU> on acpi0
[1] cpu3: <ACPI CPU> on acpi0
[1] cpu4: <ACPI CPU> on acpi0
[1] cpu5: <ACPI CPU> on acpi0
[1] cpu6: <ACPI CPU> on acpi0
[1] cpu7: <ACPI CPU> on acpi0
[1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
[1] Timecounter "HPET" frequency 14318180 Hz quality 950
[1] Event timer "HPET" frequency 14318180 Hz quality 550
[1] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
[1] atrtc0: Warning: Couldn't map I/O.
[1] Event timer "RTC" frequency 32768 Hz quality 0
[1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
[1] Timecounter "i8254" frequency 1193182 Hz quality 0
[1] Event timer "i8254" frequency 1193182 Hz quality 100
[1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
[1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[1] pcib0: _OSC returned error 0x10
[1] pci0: <ACPI PCI bus> on pcib0
[1] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
[1] vgapci0: Boot video device
[1] pci0: <multimedia, HDA> at device 3.0 (no driver attached)
[1] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7d00000-0xf7d0ffff irq 16 at device 20.0 on pci0
[1] xhci0: 32 bytes context size, 64-bit DMA
[1] xhci0: Port routing mask set to 0xffffffff
[1] usbus0 on xhci0
[1] pci0: <simple comms> at device 22.0 (no driver attached)
[1] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7d1c000-0xf7d1c3ff irq 16 at device 26.0 on pci0
[1] usbus1: EHCI version 1.0
[1] usbus1 on ehci0
[1] pci0: <multimedia, HDA> at device 27.0 (no driver attached)
[1] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
[1] pcib1: [GIANT-LOCKED]
[1] pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
[1] pci1: <ACPI PCI bus> on pcib2
[1] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xf7c00000-0xf7c00fff,0xf0000000-0xf0003fff irq 18 at device 0.0 on pci1
[1] re0: Using 1 MSI-X message
[1] re0: Chip rev. 0x4c000000
[1] re0: MAC rev. 0x00000000
[1] miibus0: <MII bus> on re0
[1] rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0
[1] rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
[1] re0: Using defaults for TSO: 65518/35/2048
[1] re0: Ethernet address: d8:cb:8a:9b:5b:d3
[1] re0: netmap queues/slots: TX 1/256, RX 1/256
[1] pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
[1] pci2: <ACPI PCI bus> on pcib3
[1] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci2
[1] pci3: <ACPI PCI bus> on pcib4
[1] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7d1b000-0xf7d1b3ff irq 23 at device 29.0 on pci0
[1] usbus2: EHCI version 1.0
[1] usbus2 on ehci1
[1] isab0: <PCI-ISA bridge> at device 31.0 on pci0
[1] isa0: <ISA bus> on isab0
[1] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7d1a000-0xf7d1a7ff irq 19 at device 31.2 on pci0
[1] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
[1] ahcich0: <AHCI channel> at channel 0 on ahci0
[1] ahcich1: <AHCI channel> at channel 1 on ahci0
[1] ahciem0: <AHCI enclosure management bridge> on ahci0
[1] ichsmb0: <Intel Lynx Point SMBus controller> port 0xf040-0xf05f mem 0xf7d19000-0xf7d190ff irq 18 at device 31.3 on pci0
[1] smbus0: <System Management Bus> on ichsmb0
[1] smb0: <SMBus generic I/O> on smbus0
[1] acpi_button0: <Power Button> on acpi0
[1] acpi_tz0: <Thermal Zone> on acpi0
[1] acpi_tz1: <Thermal Zone> on acpi0
[1] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
[1] ichwd0: <Intel Lynx Point watchdog timer> on isa0
[1] orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff on isa0
[1] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
[1] atkbd0: <AT Keyboard> irq 1 on atkbdc0
[1] kbd0 at atkbd0
[1] atkbd0: [GIANT-LOCKED]
[1] coretemp0: <CPU On-Die Thermal Sensors> on cpu0
[1] est0: <Enhanced SpeedStep Frequency Control> on cpu0
[1] coretemp1: <CPU On-Die Thermal Sensors> on cpu1
[1] est1: <Enhanced SpeedStep Frequency Control> on cpu1
[1] coretemp2: <CPU On-Die Thermal Sensors> on cpu2
[1] est2: <Enhanced SpeedStep Frequency Control> on cpu2
[1] coretemp3: <CPU On-Die Thermal Sensors> on cpu3
[1] est3: <Enhanced SpeedStep Frequency Control> on cpu3
[1] coretemp4: <CPU On-Die Thermal Sensors> on cpu4
[1] est4: <Enhanced SpeedStep Frequency Control> on cpu4
[1] coretemp5: <CPU On-Die Thermal Sensors> on cpu5
[1] est5: <Enhanced SpeedStep Frequency Control> on cpu5
[1] coretemp6: <CPU On-Die Thermal Sensors> on cpu6
[1] est6: <Enhanced SpeedStep Frequency Control> on cpu6
[1] coretemp7: <CPU On-Die Thermal Sensors> on cpu7
[1] est7: <Enhanced SpeedStep Frequency Control> on cpu7
[1] The GEOM class MIRROR is already loaded.
[1] usbus0: 5.0Gbps Super Speed USB v3.0
[1] ZFS filesystem version: 5
[1] ZFS storage pool version: features support (5000)
[1] Timecounters tick every 1.000 msec
[1] nvme cam probe device init
[1] usbus1: 480Mbps High Speed USB v2.0
[1] usbus2: 480Mbps High Speed USB v2.0
[1] ugen0.1: <0x8086> at usbus0
[1] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[1] ugen1.1: <Intel> at usbus1
[1] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
[1] ugen2.1: <Intel> at usbus2
[1] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
[1] ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
[1] ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
[1] ses0: SEMB SES Device
[1] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
[1] ada0: <TOSHIBA DT01ACA100 MS2OA750> ATA8-ACS SATA 3.x device
[1] ada0: Serial Number 85PBV7YFS
[1] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
[1] ada0: Command Queueing enabled
[1] ada0: 953869MB (1953525168 512 byte sectors)
[1] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
[1] ada1: <TOSHIBA DT01ACA100 MS2OA750> ATA8-ACS SATA 3.x device
[1] ada1: Serial Number 45LJRUUNS
[1] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
[1] ada1: Command Queueing enabled
[1] ada1: 953869MB (1953525168 512 byte sectors)
[1] SMP: AP CPU #1 Launched!
[1] SMP: AP CPU #7 Launched!
[1] SMP: AP CPU #5 Launched!
[1] SMP: AP CPU #3 Launched!
[1] SMP: AP CPU #2 Launched!
[1] SMP: AP CPU #4 Launched!
[1] SMP: AP CPU #6 Launched!
[1] Timecounter "TSC-low" frequency 2000035524 Hz quality 1000
[1] Trying to mount root from zfs:zroot/ROOT/default []...
[1] Root mount waiting for: usbus2 usbus1 usbus0
[2] uhub1: 2 ports with 2 removable, self powered
[2] uhub0: 21 ports with 21 removable, self powered
[2] uhub2: 2 ports with 2 removable, self powered
[2] Root mount waiting for: usbus2 usbus1 usbus0
[2] ugen0.2: <GASIA> at usbus0
[2] ukbd0: <GASIA PS2toUSB Adapter, class 0/0, rev 1.10/2.01, addr 1> on usbus0
[2] kbd2 at ukbd0
[2] ums0: <GASIA PS2toUSB Adapter, class 0/0, rev 1.10/2.01, addr 1> on usbus0
[2] ums0: 5 buttons and [XYZ] coordinates ID=1
[2] ugen1.2: <vendor 0x8087> at usbus1
[2] uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1
[2] ugen2.2: <vendor 0x8087> at usbus2
[2] uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2
[3] uhub3: 6 ports with 6 removable, self powered
[3] uhub4: 6 ports with 6 removable, self powered
[4] Setting hostuuid: 00000000-0000-0000-0000-d8cb8a9b5bd3.
[4] Setting hostid: 0x5c933872.
[4] No suitable dump device was found.
[4] Starting file system checks:
[4] Mounting local filesystems:.
[6] ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/dovecot /usr/local/lib/mysql /usr/local/lib/mysql/plugin /usr/local/lib/perl5/5.24/mach/CORE
[6] 32-bit compatibility ldconfig path: /usr/lib32
[6] Setting hostname: root.
[6] Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
[6] Feeding entropy: .
[6] re0: link state changed to DOWN
[8] Starting Network: lo0 re0.
[8] lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
[8] 	options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
[8] 	inet6 ::1 prefixlen 128 
[8] 	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 
[8] 	inet 127.0.0.1 netmask 0xff000000 
[8] 	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
[8] 	groups: lo 
[8] re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
[8] 	options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
[8] 	ether d8:cb:8a:9b:5b:d3
[8] 	inet 89.163.140.251 netmask 0xffffff00 broadcast 89.163.140.255 
[8] 	inet 37.157.255.52 netmask 0xffffffff broadcast 37.157.255.52 
[8] 	inet6 fe80::dacb:8aff:fe9b:5bd3%re0 prefixlen 64 scopeid 0x1 
[8] 	inet6 2001:4ba0:ffa4:26f::1 prefixlen 64 
[8] 	inet6 2001:4ba0:ffa4:26f::2 prefixlen 64 
[8] 	inet6 2001:4ba0:ffa4:26f::3 prefixlen 64 
[8] 	inet6 2001:4ba0:ffa4:26f::4 prefixlen 64 
[8] 	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
[8] 	media: Ethernet autoselect (none)
[8] 	status: no carrier
[8] Starting devd.
[9] Configuring vt: keymap.
[9] Starting ums0 moused.
[9] add host 127.0.0.1: gateway lo0 fib 0: route already in table
[9] add host 127.0.0.1: gateway lo0 fib 1: route already in table
[9] add host 127.0.0.1: gateway lo0 fib 2: route already in table
[9] add host 127.0.0.1: gateway lo0 fib 3: route already in table
[9] add host 127.0.0.1: gateway lo0 fib 4: route already in table
[9] add host 127.0.0.1: gateway lo0 fib 5: route already in table
[9] add host 127.0.0.1: gateway lo0 fib 6: route already in table
[9] add host 127.0.0.1: gateway lo0 fib 7: route already in table
[9] add host 127.0.0.1: gateway lo0 fib 8: route already in table
[9] add host 127.0.0.1: gateway lo0 fib 9: route already in table
[9] add host 127.0.0.1: gateway lo0 fib 10: route already in table
[9] add host 127.0.0.1: gateway lo0 fib 11: route already in table
[9] add host 127.0.0.1: gateway lo0 fib 12: route already in table
[9] add host 127.0.0.1: gateway lo0 fib 13: route already in table
[9] add host 127.0.0.1: gateway lo0 fib 14: route already in table
[9] add host 127.0.0.1: gateway lo0 fib 15: route already in table
[9] add net default: gateway 89.163.140.1 fib 0
[9] add host ::1: gateway lo0 fib 0: route already in table
[9] add host ::1: gateway lo0 fib 1: route already in table
[9] add host ::1: gateway lo0 fib 2: route already in table
[9] add host ::1: gateway lo0 fib 3: route already in table
[9] add host ::1: gateway lo0 fib 4: route already in table
[9] add host ::1: gateway lo0 fib 5: route already in table
[9] add host ::1: gateway lo0 fib 6: route already in table
[9] add host ::1: gateway lo0 fib 7: route already in table
[9] add host ::1: gateway lo0 fib 8: route already in table
[9] add host ::1: gateway lo0 fib 9: route already in table
[9] add host ::1: gateway lo0 fib 10: route already in table
[9] add host ::1: gateway lo0 fib 11: route already in table
[9] add host ::1: gateway lo0 fib 12: route already in table
[9] add host ::1: gateway lo0 fib 13: route already in table
[9] add host ::1: gateway lo0 fib 14: route already in table
[9] add host ::1: gateway lo0 fib 15: route already in table
[9] add net fe80::: gateway ::1 fib 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
[9] add net ff02::: gateway ::1 fib 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
[9] add net ::ffff:0.0.0.0: gateway ::1 fib 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
[9] add net ::0.0.0.0: gateway ::1 fib 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
[9] add host 2001:4ba0:ffa4:1:beef::1: gateway re0 fib 0
[9] add net default: gateway 2001:4ba0:ffa4:1:beef::1 fib 0
[9] Binding static NDP pair(s): gateway.
[9] Creating and/or trimming log files.
[9] Starting syslogd.
[9] Clearing /tmp.
[9] Starting pureftpd.
[9] Jul  9 13:00:47 root pure-ftpd: (?@?) [ERROR] Unable to find the 'ftp' account
[9] Updating motd:.
[9] Mounting late filesystems:.
[10] Starting dovecot.
[10] re0: link state changed to UP
[10] postfix/postfix-script: starting the Postfix mail system
[10] Performing sanity check on php-fpm configuration:
[12] [09-Jul-2017 13:00:50] NOTICE: configuration file /usr/local/etc/php-fpm.conf test is successful

[12] Starting php_fpm.
[12] Performing sanity check on nginx configuration:
[13] nginx: the configuration file /usr/local/etc/nginx/nginx.conf syntax is ok
[13] nginx: configuration file /usr/local/etc/nginx/nginx.conf test is successful
[13] Starting nginx.
[13] Starting mysql.
[15] Updating cpucodes...
[15] /usr/local/share/cpucontrol/m32306c3_00000022.fw: updating cpu /dev/cpuctl0 from rev 0x19 to rev 0x22... done.
[15] /usr/local/share/cpucontrol/m32306c3_00000022.fw: updating cpu /dev/cpuctl2 from rev 0x19 to rev 0x22... done.
[15] /usr/local/share/cpucontrol/m32306c3_00000022.fw: updating cpu /dev/cpuctl4 from rev 0x19 to rev 0x22... done.
[15] /usr/local/share/cpucontrol/m32306c3_00000022.fw: updating cpu /dev/cpuctl6 from rev 0x19 to rev 0x22... done.
[15] Done.
[15] Configuring vt: keymap blanktime.
[15] Performing sanity check on sshd configuration.
[15] Starting sshd.
[15] Starting cron.
[16] Starting background file system checks in 60 seconds.
[2907] Jul  9 13:49:05 root reboot: rebooted by admin
[2907] Jul  9 13:49:05 root syslogd: exiting on signal 15
[2915] Waiting (max 60 seconds) for system process `vnlru' to stop... done
[2915] Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
[2915] Waiting (max 60 seconds) for system process `syncer' to stop... 
[2915] Syncing disks, vnodes remaining... 0 0 0 0 0 done
[2920] All buffers synced.
[2920] Uptime: 48m40s
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-RELEASE-p10 #0: Wed Jun 21 11:07:05 CEST 2017
    root@root:/usr/obj/usr/src/sys/MYKERNEL amd64
FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0)
[1] VT(vga): resolution 640x480
[1] can't re-use a leaf (geom_mirror)!
[1] module_register: cannot register g_mirror from kernel; already loaded from geom_mirror.ko
[1] Module g_mirror failed to register: 17
[1] module_register: cannot register accf_data from kernel; already loaded from accf_data.ko
[1] Module accf_data failed to register: 17
[1] module_register: cannot register accf_dns from kernel; already loaded from accf_dns.ko
[1] Module accf_dns failed to register: 17
[1] module_register: cannot register accf_http from kernel; already loaded from accf_http.ko
[1] Module accf_http failed to register: 17
[1] CPU: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz (4000.08-MHz K8-class CPU)
[1]   Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
[1]   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
[1]   Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
[1]   AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
[1]   AMD Features2=0x21<LAHF,ABM>
[1]   Structured Extended Features=0x2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG>
[1]   XSAVE Features=0x1<XSAVEOPT>
[1]   VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
[1]   TSC: P-state invariant, performance statistics
[1] real memory  = 34359738368 (32768 MB)
[1] avail memory = 33153069056 (31617 MB)
[1] Event timer "LAPIC" quality 600
[1] ACPI APIC Table: <ALASKA A M I>
[1] FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
[1] FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
[1] random: unblocking device.
[1] ioapic0 <Version 2.0> irqs 0-23 on motherboard
[1] netisr_init: forcing maxthreads to 1 and bindthreads to 0 for device polling
[1] random: entropy device external interface
[1] module_register_init: MOD_LOAD (vesa, 0xffffffff80ec7880, 0) error 19
[1] kbd1 at kbdmux0
[1] random: registering fast source Intel Secure Key RNG
[1] random: fast provider: "Intel Secure Key RNG"
[1] netmap: loaded module
[1] module_register_init: MOD_LOAD (accf_data, 0xffffffff809ed5d0, 0xffffffff822580d8) error 17
[1] module_register_init: MOD_LOAD (accf_dns, 0xffffffff809ed5d0, 0xffffffff8225a160) error 17
[1] module_register_init: MOD_LOAD (accf_http, 0xffffffff809ed5d0, 0xffffffff8225c800) error 17
[1] vtvga0: <VT VGA driver> on motherboard
[1] smbios0: <System Management BIOS> at iomem 0xf04d0-0xf04ee on motherboard
[1] smbios0: Version: 2.8, BCD Revision: 2.7
[1] cryptosoft0: <software crypto> on motherboard
[1] aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
[1] acpi0: <ALASKA A M I> on motherboard
[1] acpi0: Power Button (fixed)
[1] cpu0: <ACPI CPU> on acpi0
[1] cpu1: <ACPI CPU> on acpi0
[1] cpu2: <ACPI CPU> on acpi0
[1] cpu3: <ACPI CPU> on acpi0
[1] cpu4: <ACPI CPU> on acpi0
[1] cpu5: <ACPI CPU> on acpi0
[1] cpu6: <ACPI CPU> on acpi0
[1] cpu7: <ACPI CPU> on acpi0
[1] hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
[1] Timecounter "HPET" frequency 14318180 Hz quality 950
[1] Event timer "HPET" frequency 14318180 Hz quality 550
[1] atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
[1] atrtc0: Warning: Couldn't map I/O.
[1] Event timer "RTC" frequency 32768 Hz quality 0
[1] attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
[1] Timecounter "i8254" frequency 1193182 Hz quality 0
[1] Event timer "i8254" frequency 1193182 Hz quality 100
[1] Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
[1] acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
[1] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
[1] pcib0: _OSC returned error 0x10
[1] pci0: <ACPI PCI bus> on pcib0
[1] vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
[1] vgapci0: Boot video device
[1] pci0: <multimedia, HDA> at device 3.0 (no driver attached)
[1] xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7d00000-0xf7d0ffff irq 16 at device 20.0 on pci0
[1] xhci0: 32 bytes context size, 64-bit DMA
[1] xhci0: Port routing mask set to 0xffffffff
[1] usbus0 on xhci0
[1] pci0: <simple comms> at device 22.0 (no driver attached)
[1] ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7d1c000-0xf7d1c3ff irq 16 at device 26.0 on pci0
[1] usbus1: EHCI version 1.0
[1] usbus1 on ehci0
[1] pci0: <multimedia, HDA> at device 27.0 (no driver attached)
[1] pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
[1] pcib1: [GIANT-LOCKED]
[1] pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
[1] pci1: <ACPI PCI bus> on pcib2
[1] re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xf7c00000-0xf7c00fff,0xf0000000-0xf0003fff irq 18 at device 0.0 on pci1
[1] re0: Using 1 MSI-X message
[1] re0: Chip rev. 0x4c000000
[1] re0: MAC rev. 0x00000000
[1] miibus0: <MII bus> on re0
[1] rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0
[1] rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
[1] re0: Using defaults for TSO: 65518/35/2048
[1] re0: Ethernet address: d8:cb:8a:9b:5b:d3
[1] re0: netmap queues/slots: TX 1/256, RX 1/256
[1] pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
[1] pci2: <ACPI PCI bus> on pcib3
[1] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci2
[1] pci3: <ACPI PCI bus> on pcib4
[1] ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7d1b000-0xf7d1b3ff irq 23 at device 29.0 on pci0
[1] usbus2: EHCI version 1.0
[1] usbus2 on ehci1
[1] isab0: <PCI-ISA bridge> at device 31.0 on pci0
[1] isa0: <ISA bus> on isab0
[1] ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7d1a000-0xf7d1a7ff irq 19 at device 31.2 on pci0
[1] ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
[1] ahcich0: <AHCI channel> at channel 0 on ahci0
[1] ahcich1: <AHCI channel> at channel 1 on ahci0
[1] ahciem0: <AHCI enclosure management bridge> on ahci0
[1] ichsmb0: <Intel Lynx Point SMBus controller> port 0xf040-0xf05f mem 0xf7d19000-0xf7d190ff irq 18 at device 31.3 on pci0
[1] smbus0: <System Management Bus> on ichsmb0
[1] smb0: <SMBus generic I/O> on smbus0
[1] acpi_button0: <Power Button> on acpi0
[1] acpi_tz0: <Thermal Zone> on acpi0
[1] acpi_tz1: <Thermal Zone> on acpi0
[1] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
[1] ichwd0: <Intel Lynx Point watchdog timer> on isa0
[1] orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff on isa0
[1] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
[1] atkbd0: <AT Keyboard> irq 1 on atkbdc0
[1] kbd0 at atkbd0
[1] atkbd0: [GIANT-LOCKED]
[1] coretemp0: <CPU On-Die Thermal Sensors> on cpu0
[1] est0: <Enhanced SpeedStep Frequency Control> on cpu0
[1] coretemp1: <CPU On-Die Thermal Sensors> on cpu1
[1] est1: <Enhanced SpeedStep Frequency Control> on cpu1
[1] coretemp2: <CPU On-Die Thermal Sensors> on cpu2
[1] est2: <Enhanced SpeedStep Frequency Control> on cpu2
[1] coretemp3: <CPU On-Die Thermal Sensors> on cpu3
[1] est3: <Enhanced SpeedStep Frequency Control> on cpu3
[1] coretemp4: <CPU On-Die Thermal Sensors> on cpu4
[1] est4: <Enhanced SpeedStep Frequency Control> on cpu4
[1] coretemp5: <CPU On-Die Thermal Sensors> on cpu5
[1] est5: <Enhanced SpeedStep Frequency Control> on cpu5
[1] coretemp6: <CPU On-Die Thermal Sensors> on cpu6
[1] est6: <Enhanced SpeedStep Frequency Control> on cpu6
[1] coretemp7: <CPU On-Die Thermal Sensors> on cpu7
[1] est7: <Enhanced SpeedStep Frequency Control> on cpu7
[1] The GEOM class MIRROR is already loaded.
[1] usbus0: 5.0Gbps Super Speed USB v3.0
[1] ZFS filesystem version: 5
[1] ZFS storage pool version: features support (5000)
[1] Timecounters tick every 1.000 msec
[1] nvme cam probe device init
[1] usbus1: 480Mbps High Speed USB v2.0
[1] usbus2: 480Mbps High Speed USB v2.0
[1] ugen0.1: <0x8086> at usbus0
[1] uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
[1] ugen1.1: <Intel> at usbus1
[1] uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
[1] ugen2.1: <Intel> at usbus2
[1] uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
[1] ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
[1] ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
[1] ses0: SEMB SES Device
[1] ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
[1] ada0: <TOSHIBA DT01ACA100 MS2OA750> ATA8-ACS SATA 3.x device
[1] ada0: Serial Number 85PBV7YFS
[1] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
[1] ada0: Command Queueing enabled
[1] ada0: 953869MB (1953525168 512 byte sectors)
[1] ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
[1] ada1: <TOSHIBA DT01ACA100 MS2OA750> ATA8-ACS SATA 3.x device
[1] ada1: Serial Number 45LJRUUNS
[1] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
[1] ada1: Command Queueing enabled
[1] ada1: 953869MB (1953525168 512 byte sectors)
[1] SMP: AP CPU #1 Launched!
[1] SMP: AP CPU #5 Launched!
[1] SMP: AP CPU #3 Launched!
[1] SMP: AP CPU #4 Launched!
[1] SMP: AP CPU #2 Launched!
[1] SMP: AP CPU #6 Launched!
[1] SMP: AP CPU #7 Launched!
[1] Timecounter "TSC-low" frequency 2000042286 Hz quality 1000
[1] Trying to mount root from zfs:zroot/ROOT/default []...
[1] Root mount waiting for: usbus2 usbus1 usbus0
[2] uhub1: 2 ports with 2 removable, self powered
[2] uhub0: 21 ports with 21 removable, self powered
[2] uhub2: 2 ports with 2 removable, self powered
[2] Root mount waiting for: usbus2 usbus1 usbus0
[2] ugen0.2: <GASIA> at usbus0
[2] ukbd0: <GASIA PS2toUSB Adapter, class 0/0, rev 1.10/2.01, addr 1> on usbus0
[2] kbd2 at ukbd0
[2] ums0: <GASIA PS2toUSB Adapter, class 0/0, rev 1.10/2.01, addr 1> on usbus0
[2] ums0: 5 buttons and [XYZ] coordinates ID=1
[2] ugen1.2: <vendor 0x8087> at usbus1
[2] uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1
[2] ugen2.2: <vendor 0x8087> at usbus2
[2] uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2
[3] uhub3: 6 ports with 6 removable, self powered
[3] uhub4: 6 ports with 6 removable, self powered
[4] Setting hostuuid: 00000000-0000-0000-0000-d8cb8a9b5bd3.
[4] Setting hostid: 0x5c933872.
[4] No suitable dump device was found.
[4] Starting file system checks:
[4] Mounting local filesystems:.
[6] ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/dovecot /usr/local/lib/mysql /usr/local/lib/mysql/plugin /usr/local/lib/perl5/5.24/mach/CORE
[6] 32-bit compatibility ldconfig path: /usr/lib32
[6] Setting hostname: root.phoenix-blog.de.
[6] Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
[6] Feeding entropy: .
[6] re0: link state changed to DOWN
[9] Starting Network: lo0 re0.
[9] lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
[9] 	options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
[9] 	inet6 ::1 prefixlen 128 
[9] 	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 
[9] 	inet 127.0.0.1 netmask 0xff000000 
[9] 	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
[9] 	groups: lo 
[9] re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
[9] 	options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
[9] 	ether d8:cb:8a:9b:5b:d3
[9] 	inet 89.163.140.251 netmask 0xffffff00 broadcast 89.163.140.255 
[9] 	inet 37.157.255.52 netmask 0xffffffff broadcast 37.157.255.52 
[9] 	inet6 fe80::dacb:8aff:fe9b:5bd3%re0 prefixlen 64 scopeid 0x1 
[9] 	inet6 2001:4ba0:ffa4:26f::1 prefixlen 64 
[9] 	inet6 2001:4ba0:ffa4:26f::2 prefixlen 64 
[9] 	inet6 2001:4ba0:ffa4:26f::3 prefixlen 64 
[9] 	inet6 2001:4ba0:ffa4:26f::4 prefixlen 64 
[9] 	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
[9] 	media: Ethernet autoselect (none)
[9] 	status: no carrier
[9] Starting devd.
[9] Configuring vt: keymap.
[9] Starting ums0 moused.
[9] add host 127.0.0.1: gateway lo0 fib 0: route already in table
[9] add host 127.0.0.1: gateway lo0 fib 1: route already in table
[9] add host 127.0.0.1: gateway lo0 fib 2: route already in table
[9] add host 127.0.0.1: gateway lo0 fib 3: route already in table
[9] add host 127.0.0.1: gateway lo0 fib 4: route already in table
[9] add host 127.0.0.1: gateway lo0 fib 5: route already in table
[9] add host 127.0.0.1: gateway lo0 fib 6: route already in table
[9] add host 127.0.0.1: gateway lo0 fib 7: route already in table
[9] add host 127.0.0.1: gateway lo0 fib 8: route already in table
[9] add host 127.0.0.1: gateway lo0 fib 9: route already in table
[9] add host 127.0.0.1: gateway lo0 fib 10: route already in table
[9] add host 127.0.0.1: gateway lo0 fib 11: route already in table
[9] add host 127.0.0.1: gateway lo0 fib 12: route already in table
[9] add host 127.0.0.1: gateway lo0 fib 13: route already in table
[9] add host 127.0.0.1: gateway lo0 fib 14: route already in table
[9] add host 127.0.0.1: gateway lo0 fib 15: route already in table
[9] add net default: gateway 89.163.140.1 fib 0
[9] add host ::1: gateway lo0 fib 0: route already in table
[9] add host ::1: gateway lo0 fib 1: route already in table
[9] add host ::1: gateway lo0 fib 2: route already in table
[9] add host ::1: gateway lo0 fib 3: route already in table
[9] add host ::1: gateway lo0 fib 4: route already in table
[9] add host ::1: gateway lo0 fib 5: route already in table
[9] add host ::1: gateway lo0 fib 6: route already in table
[9] add host ::1: gateway lo0 fib 7: route already in table
[9] add host ::1: gateway lo0 fib 8: route already in table
[9] add host ::1: gateway lo0 fib 9: route already in table
[9] add host ::1: gateway lo0 fib 10: route already in table
[9] add host ::1: gateway lo0 fib 11: route already in table
[9] add host ::1: gateway lo0 fib 12: route already in table
[9] add host ::1: gateway lo0 fib 13: route already in table
[9] add host ::1: gateway lo0 fib 14: route already in table
[9] add host ::1: gateway lo0 fib 15: route already in table
[9] add net fe80::: gateway ::1 fib 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
[9] add net ff02::: gateway ::1 fib 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
[9] add net ::ffff:0.0.0.0: gateway ::1 fib 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
[9] add net ::0.0.0.0: gateway ::1 fib 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
[9] add host 2001:4ba0:ffa4:1:beef::1: gateway re0 fib 0
[9] add net default: gateway 2001:4ba0:ffa4:1:beef::1 fib 0
[9] Binding static NDP pair(s): gateway.
[9] Creating and/or trimming log files.
[9] Starting syslogd.
[9] Clearing /tmp.
[10] Starting pureftpd.
[10] Jul  9 13:50:25 root pure-ftpd: (?@?) [ERROR] Unable to find the 'ftp' account
[10] Updating motd:.
[10] Mounting late filesystems:.
[10] Starting dovecot.
[10] re0: link state changed to UP
[11] postfix/postfix-script: starting the Postfix mail system
[11] Performing sanity check on php-fpm configuration:
[13] [09-Jul-2017 13:50:28] NOTICE: configuration file /usr/local/etc/php-fpm.conf test is successful

[13] Starting php_fpm.
[13] Performing sanity check on nginx configuration:
[13] nginx: the configuration file /usr/local/etc/nginx/nginx.conf syntax is ok
[13] nginx: configuration file /usr/local/etc/nginx/nginx.conf test is successful
[13] Starting nginx.
[13] Starting mysql.
[16] Updating cpucodes...
[16] /usr/local/share/cpucontrol/m32306c3_00000022.fw: updating cpu /dev/cpuctl0 from rev 0x19 to rev 0x22... done.
[16] /usr/local/share/cpucontrol/m32306c3_00000022.fw: updating cpu /dev/cpuctl2 from rev 0x19 to rev 0x22... done.
[16] /usr/local/share/cpucontrol/m32306c3_00000022.fw: updating cpu /dev/cpuctl4 from rev 0x19 to rev 0x22... done.
[16] /usr/local/share/cpucontrol/m32306c3_00000022.fw: updating cpu /dev/cpuctl6 from rev 0x19 to rev 0x22... done.
[16] Done.
[16] Configuring vt: keymap blanktime.
[16] Performing sanity check on sshd configuration.
[16] Starting sshd.
[16] Starting cron.
[16] Starting background file system checks in 60 seconds.
[16]
LG
Proti

"Die Kamera wird bei hohen ISO Werten aber rauschen. Nichts ahnend hielt er sich die Kamera ans Ohr!"
Top
User avatar
Proteus
Posts: 289
Joined: 2013-04-14 05:08
Location: Holzgerlingen
 

Re: IPv6 pingt auf google nicht?

Post by Proteus »

Hier noch ein Auszug aus meiner Nginx Konfiguration und so wie ich es installiere:

Code: Select all

cd /usr/ports/www/nginx-devel && make config-recursive all install clean-depends clean && cd

mkdir -p /usr/local/etc/nginx/cache
touch /usr/local/etc/nginx/cache
chmod -R 755 /usr/local/etc/nginx/cache

mkdir -p /var/log/nginx/
touch /var/log/nginx/{error,access}.log

cat > /usr/local/etc/nginx/nginx.conf << "EOF"
load_module /usr/local/libexec/nginx/ngx_http_perl_module.so;
# load_module /usr/local/libexec/nginx/ngx_stream_geoip2_module.so;
load_module /usr/local/libexec/nginx/ngx_http_geoip_module.so;
load_module /usr/local/libexec/nginx/ngx_http_xslt_filter_module.so;
load_module /usr/local/libexec/nginx/ngx_mail_module.so;
load_module /usr/local/libexec/nginx/ngx_http_geoip2_module.so;
load_module /usr/local/libexec/nginx/ngx_stream_module.so;
load_module /usr/local/libexec/nginx/ngx_http_image_filter_module.so;


# Define user that run nginx
        user www;
        worker_processes 8;

# Define error log
        error_log /var/log/nginx/error.log info;

events  {
        worker_connections 2048;
        multi_accept on;
        }

http    {
        include       mime.types;
        default_type  application/octet-stream;
        log_format main '$remote_addr - $remote_user [$time_local] "$request"' '$status $body_bytes_sent "$http_referer"' '"$http_user_agent" "$http_x_forwarded_for"';
        tcp_nopush on;
        tcp_nodelay on;
        types_hash_max_size 2048;
        access_log /var/log/nginx/access.log;
      
# FastCGI
        fastcgi_cache_path /usr/local/etc/nginx/cache levels=1:2 keys_zone=WORDPRESS:100m inactive=60m;
        fastcgi_cache_key "$scheme$request_method$host$request_uri";
        fastcgi_cache_use_stale error timeout invalid_header http_500;
        fastcgi_ignore_headers Cache-Control Expires Set-Cookie;
        proxy_cache_path /usr/local/etc/nginx/cache/ keys_zone=mycache:10m;

# FloodSchutz
        large_client_header_buffers 4 256k;
        limit_conn_zone $binary_remote_addr zone=conn_limit_per_ip:10m;
        limit_req_zone $binary_remote_addr zone=req_limit_per_ip:10m rate=50r/s;
        limit_conn conn_limit_per_ip 20;
        limit_req zone=req_limit_per_ip burst=20;

# Strict-Transport
        add_header Strict-Transport-Security "max-age=31536000; includeSubdomains";
        add_header X-Frame-Options SAMEORIGIN;
        add_header X-Content-Type-Options nosniff;
        add_header X-XSS-Protection "1; mode=block";

# SSL Zertifikate
        ssl_certificate /etc/ssl/www.phoenix-blog.de.pem;
        ssl_certificate_key /etc/ssl/www.phoenix-blog.de.key;
        ssl_trusted_certificate /etc/ssl/www.phoenix-blog.de.pem;
        ssl_dhparam /etc/ssl/dh_params.pem;
        ssl_stapling on;
        ssl_stapling_verify on;
        ssl_session_cache shared:SSL:10m;
        ssl_session_timeout 10m;
        ssl_prefer_server_ciphers on;
        ssl_protocols TLSv1.2;
    resolver 127.0.0.1;
        ssl_ciphers 'ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:ECDHE-RSA-DES-CBC3-SHA:ECDHE-ECDSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:AES:CAMELLIA:DES-CBC3-SHA:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!MD5:!PSK:!aECDH:!EDH-DSS-DES-CBC3-SHA:!EDH-RSA-DES-CBC3-SHA:!KRB5-DES-CBC3-SHA';
    

# Compression
        gzip on;
        gzip_disable "MSIE [1-6]\.(?!.*SV1)";
        gzip_proxied expired no-cache no-store private auth;
        gzip_buffers 256 8k;
        gzip_comp_level 6;
        gzip_http_version 1.0;
        gzip_min_length 1024;
        gzip_vary on;
        gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript application/javascript application/json;

# GENERAL
        ignore_invalid_headers on;
        sendfile on;
        server_name_in_redirect off;
        server_tokens off;
        charset iso-8859-1;
        client_max_body_size 128M;
        client_body_buffer_size 128M;

# Timeouts
        client_body_timeout   65;
        client_header_timeout 65;
        keepalive_timeout     70;
        send_timeout          65;
      
        include wordpress/*;
}
"EOF"

Nginx Wordpress SSL Port 443 konfiguration.

mkdir -p /usr/local/etc/nginx/wordpress

cat > /usr/local/etc/nginx/wordpress/wordpress_443.conf << "EOF"
server {
        listen 89.163.140.251:443 accept_filter=dataready default_server ssl http2;
        listen [2001:4ba0:ffa4:026f::1]:443 accept_filter=dataready default_server ssl http2;
        server_name phoenix-blog.de;

        root /usr/local/www/phoenix;
        index index.html index.htm index.php;
      
        if ($request_method = POST) { set $skip_cache 1; }
        if ($query_string != "") { set $skip_cache 1; }
        if ($request_uri ~* "/wp-admin/|/xmlrpc.php|wp-.*.php|/feed/|index.php|sitemap(_index)?.xml") { set $skip_cache 1; }
        if ($http_cookie ~* "comment_author|wordpress_[a-f0-9]+|wp-postpass|wordpress_no_cache|wordpress_logged_in") { set $skip_cache 1; }

location = /50x.html {
        root /usr/local/www/nginx;
        }
        error_page 500 502 503 504 /50x.html;

location / {
        try_files $uri $uri/ /index.php?$args;
        }

location ~* \.^.+\.(ogg|ogv|svg|svgz|eot|otf|woff|mp4|ttf|rss|atom|jpg|jpeg|gif|png|ico|zip|tgz|gz|rar|bz2|doc|xls|exe|ppt|tar|mid|midi|wav|bmp|rtf)$ {
        add_header Cache-Control public;
        add_header Cache-Control must-revalidate;
        expires 7d;
        }

location ~ \.php$ {
        fastcgi_split_path_info ^(.+\.php)(/.+)$;
        fastcgi_pass unix:/var/run/fpm_www.sock;
        fastcgi_index index.php;
        fastcgi_param SCRIPT_FILENAME $request_filename;
        fastcgi_cache_bypass $skip_cache;
        fastcgi_no_cache $skip_cache;
        fastcgi_cache_valid  60m;
        fastcgi_read_timeout 300;
        fastcgi_ignore_headers Cache-Control Expires Set-Cookie;
        include fastcgi_params;
        limit_req zone=req_limit_per_ip burst=20;
        rewrite /wp-admin$ $scheme://$host$uri/ permanent;
        rewrite ^/sitemap(-+([a-zA-Z0-9_-]+))?\.xml$ "/index.php?xml_sitemap=params=$2" last;
        rewrite ^/sitemap(-+([a-zA-Z0-9_-]+))?\.xml\.gz$ "/index.php?xml_sitemap=params=$2;zip=true" last;
        rewrite ^/sitemap(-+([a-zA-Z0-9_-]+))?\.html$ "/index.php?xml_sitemap=params=$2;html=true" last;
        rewrite ^/sitemap(-+([a-zA-Z0-9_-]+))?\.html.gz$ "/index.php?xml_sitemap=params=$2;html=true;zip=true" last;
        try_files $uri =404;
    }
}
"EOF"

Nginx Wordpress Port 80 konfiguration.

cat > /usr/local/etc/nginx/wordpress/wordpress_80.conf << "EOF"
server {
        listen 89.163.140.251:80 accept_filter=dataready default_server;
        listen [2001:4ba0:ffa4:026f::1]:80 accept_filter=dataready default_server;
        server_name phoenix-blog.de;
        rewrite        ^ https://$server_name$request_uri? permanent;

        root /usr/local/www/phoenix;
        index index.php;  
      
        if ($request_method = POST) { set $skip_cache 1; }
        if ($query_string != "") { set $skip_cache 1; }
        if ($request_uri ~* "/wp-admin/|/xmlrpc.php|wp-.*.php|/feed/|index.php|sitemap(_index)?.xml") { set $skip_cache 1; }
        if ($http_cookie ~* "comment_author|wordpress_[a-f0-9]+|wp-postpass|wordpress_no_cache|wordpress_logged_in") { set $skip_cache 1; }
      
location = /50x.html {
        root /usr/local/www/nginx;
        }
        error_page 500 502 503 504 /50x.html;

location / {
        try_files $uri $uri/ /index.php?$args;
        }

location ~* \.^.+\.(ogg|ogv|svg|svgz|eot|otf|woff|mp4|ttf|rss|atom|jpg|jpeg|gif|png|ico|zip|tgz|gz|rar|bz2|doc|xls|exe|ppt|tar|mid|midi|wav|bmp|rtf)$ {
        add_header Cache-Control public;
        add_header Cache-Control must-revalidate;
        expires 7d;
        }

location ~ \.php$ {
        fastcgi_split_path_info ^(.+\.php)(/.+)$;
        fastcgi_pass unix:/var/run/fpm_www.sock;
        fastcgi_index index.php;
        fastcgi_param SCRIPT_FILENAME $request_filename;
        fastcgi_cache_bypass $skip_cache;
        fastcgi_no_cache $skip_cache;
        fastcgi_cache_valid  60m;
        fastcgi_read_timeout 300;
        fastcgi_ignore_headers Cache-Control Expires Set-Cookie;
        include fastcgi_params;
        limit_req zone=req_limit_per_ip burst=20;
        rewrite /wp-admin$ $scheme://$host$uri/ permanent;
        rewrite ^/sitemap(-+([a-zA-Z0-9_-]+))?\.xml$ "/index.php?xml_sitemap=params=$2" last;
        rewrite ^/sitemap(-+([a-zA-Z0-9_-]+))?\.xml\.gz$ "/index.php?xml_sitemap=params=$2;zip=true" last;
        rewrite ^/sitemap(-+([a-zA-Z0-9_-]+))?\.html$ "/index.php?xml_sitemap=params=$2;html=true" last;
        rewrite ^/sitemap(-+([a-zA-Z0-9_-]+))?\.html.gz$ "/index.php?xml_sitemap=params=$2;html=true;zip=true" last;
        try_files $uri =404;
    }
}
"EOF"
LG
Proti

"Die Kamera wird bei hohen ISO Werten aber rauschen. Nichts ahnend hielt er sich die Kamera ans Ohr!"
Top
User avatar
Proteus
Posts: 289
Joined: 2013-04-14 05:08
Location: Holzgerlingen
 

Re: FreeBSD IPv6 pingt nicht mehr.

Post by Proteus »

Das Problem hat sich gelöst. :rage:
Ändern die doch einfach mal so die Server Gateway-MAC Adresse von:

Code: Select all

28:92:4a:cd:08:18
auf

Code: Select all

74:8e:f8:5c:a3:00
Ohne Mitteilung ohne alles! Und da macht man sich nen Kopf woran es liegen könnte! *aufreg*
LG
Proti

"Die Kamera wird bei hohen ISO Werten aber rauschen. Nichts ahnend hielt er sich die Kamera ans Ohr!"
Top
User avatar
Proteus
Posts: 289
Joined: 2013-04-14 05:08
Location: Holzgerlingen
 

Re: [Gelöst] FreeBSD IPv6 pingt nicht mehr.

Post by Proteus »

Webtropia hat es endlich geschafft den default-router umzustellen:

Code: Select all

ipv6_defaultrouter="fe80::1%re0"
LG
Proti

"Die Kamera wird bei hohen ISO Werten aber rauschen. Nichts ahnend hielt er sich die Kamera ans Ohr!"
Top

Return to “Webserver”