ich sitze hier von einem SUSE und möchte gerne Daten die auf ein Band gesichert wurden wiederherstellen.
Mittels cpio ist dies ja möglich, wenn man weiß unter welchem dev man den Streamer findet.
Normalerweise ist er doch unter tape oder st0 zu finden. Das gibt es hier nicht.
Folgende dev habe ich zur Auswahl:
Code: Select all
praxisserver:/dev # ls
adsp ippp7 null tty17 tty54 twa11
audio ippp8 nvram tty18 tty55 twa12
block ippp9 oldmem tty19 tty56 twa13
bsg isdn parport0 tty2 tty57 twa14
bus isdnctrl port tty20 tty58 twa15
capi isdnctrl0 ppp tty21 tty59 twa2
capi20 isdnctrl1 psaux tty22 tty6 twa3
cdrom1 isdnctrl10 ptmx tty23 tty60 twa4
cdrw1 isdnctrl11 pts tty24 tty61 twa5
char isdnctrl12 random tty25 tty62 twa6
console isdnctrl13 root tty26 tty63 twa7
core isdnctrl14 rtc tty27 tty7 twa8
cpu isdnctrl15 rtc0 tty28 tty8 twa9
cpu_dma_latency isdnctrl2 scd0 tty29 tty9 .udev
disk isdnctrl3 sda tty3 ttyI0 urandom
dsp isdnctrl4 sdb tty30 ttyI1 vcs
dvd1 isdnctrl5 sdb1 tty31 ttyI10 vcs1
dvdrw1 isdnctrl6 sdb2 tty32 ttyI11 vcs10
fd isdnctrl7 sdb3 tty33 ttyI12 vcs2
fd0 isdnctrl8 sdb4 tty34 ttyI13 vcs3
fd0h1440 isdnctrl9 sg0 tty35 ttyI14 vcs4
full isdninfo sg1 tty36 ttyI15 vcs5
fuse kmem sg2 tty37 ttyI2 vcs6
hidraw0 kmsg shm tty38 ttyI3 vcs7
hidraw1 log snapshot tty39 ttyI4 vcsa
hpet loop0 snd tty4 ttyI5 vcsa1
initctl loop1 sr0 tty40 ttyI6 vcsa10
input loop2 stderr tty41 ttyI7 vcsa2
ippp0 loop3 stdin tty42 ttyI8 vcsa3
ippp1 loop4 stdout tty43 ttyI9 vcsa4
ippp10 loop5 .sysconfig tty44 ttyS0 vcsa5
ippp11 loop6 tty tty45 ttyS1 vcsa6
ippp12 loop7 tty0 tty46 ttyS2 vcsa7
ippp13 lp0 tty1 tty47 ttyS3 watchdog
ippp14 mapper tty10 tty48 ttyS4 xconsole
ippp15 mcelog tty11 tty49 ttyS5 zero
ippp2 mem tty12 tty5 ttyS6
ippp3 mixer tty13 tty50 ttyS7
ippp4 net tty14 tty51 twa0
ippp5 network_latency tty15 tty52 twa1
ippp6 network_throughput tty16 tty53 twa10
vielen Dank.
mfG
Tobias Sänger