mein Logwatch hat am Heiligabend folgende Zeilen generiert:
Soweit ich weiss, ist fd0 die Floppy. Jedoch ist kein Laufwerk im Server eingebaut und natürlich greift auch keines meiner Skripte darauf zu.WARNING: Kernel Errors Present
end_request: I/O error, dev fd0, sector ...: 3 Time(s)
1 Time(s): NET: Registered protocol family 17
1 Time(s): Uniform Multi-Platform E-IDE driver
1 Time(s): ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
1 Time(s): klogd 1.4.1, ---------- state change ----------
1 Time(s): lp0: using parport0 (interrupt-driven).
2 Time(s): lp0: using parport0 (polling).
2 Time(s): parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
2 Time(s): parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
2 Time(s): parport 0x378: You gave this address, but there is probably no parallel port there!
2 Time(s): parport0: PC-style at 0x378 [PCSPP,TRISTATE]
1 Time(s): parport0: PC-style at 0x378, irq 7 [PCSPP]
1 Time(s): parport_pc 00:08: activated
2 Time(s): parport_pc 00:08: disabled
1 Time(s): parport_pc 00:08: reported by Plug and Play ACPI
1 Time(s): ppa: Version 2.07 (for Linux 2.4.x)
1 Time(s): st: Version 20080221, fixed bufsize 32768, s/g segs 256
In den letzten 2 Tagen ist diese Meldung wieder verschwunden in den täglichen E-Mail Updates.
Wie ist die Fehlermeldung zu lesen? Hardwarefehler oder Hackingversuch?
Vielen Dank!
