Postfix + Dovecot Emails nicht als Maildir gespeichert

thestealth
Posts: 8
Joined: 2009-09-17 16:18

Postfix + Dovecot Emails nicht als Maildir gespeichert

Post by thestealth »

Hallo,

ich bin neu und eigentlich nur wegen diesem einen Problem hier.

Ich versuche seid 3 Tagen auf meinem Root Postfix + Dovecot ans laufen zu bekommen hier mal alle Infos:

Root Typ: Dedizierter Root
OS: OpenSuse 11.1

Zuletzt wurde Postfix und Dovecot über folgende Anleitung installiert

http://debian.asconix.com/postfix-dovec ... enny-howto

Funktioniert soweit ja auch kann mich mit TB Einloggen und Emails verschicken nur wenn ich zu dieser Email ne Mail Schicke wird sie nicht auf dem Root gespeichert!

Hier die Logs von einem Empfang


mail.info

Code: Select all

Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: master_notify: status 0
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: name_mask: resource
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: name_mask: software
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: xsasl_dovecot_server_create: SASL service=smtp, realm=ks30xxxx.xxxxxxxxxxx.com
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: name_mask: noanonymous
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: xsasl_dovecot_server_mech_filter: keep mechanism: PLAIN
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: xsasl_dovecot_server_mech_filter: keep mechanism: LOGIN
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: connect from unknown[151.189.21.54]
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: match_list_match: unknown: no match
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: match_list_match: 151.189.21.54: no match
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: match_list_match: unknown: no match
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: match_list_match: 151.189.21.54: no match
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: match_hostname: unknown ~? 127.0.0.0/8
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: match_hostaddr: 151.189.21.54 ~? 127.0.0.0/8
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: match_list_match: unknown: no match
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: match_list_match: 151.189.21.54: no match
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: send attr request = connect
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: send attr ident = smtp:151.189.21.54
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: private/anvil: wanted attribute: status
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: input attribute name: status
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: input attribute value: 0
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: private/anvil: wanted attribute: count
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: input attribute name: count
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: input attribute value: 1
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: private/anvil: wanted attribute: rate
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: input attribute name: rate
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: input attribute value: 1
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: private/anvil: wanted attribute: (list terminator)
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: input attribute name: (end)
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: > unknown[151.189.21.54]: 220 ks30xxxx.xxxxxxxxxxx.com ESMTP
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: watchdog_pat: 0xb7fb21b0
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: < unknown[151.189.21.54]: EHLO mail-in-14.arcor-online.net
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: > unknown[151.189.21.54]: 250-ks30xxxx.xxxxxxxxxxx.com
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: > unknown[151.189.21.54]: 250-PIPELINING
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: > unknown[151.189.21.54]: 250-SIZE 10240000
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: > unknown[151.189.21.54]: 250-VRFY
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: > unknown[151.189.21.54]: 250-ETRN
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: > unknown[151.189.21.54]: 250-AUTH PLAIN LOGIN
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: match_list_match: unknown: no match
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: match_list_match: 151.189.21.54: no match
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: > unknown[151.189.21.54]: 250-AUTH=PLAIN LOGIN
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: > unknown[151.189.21.54]: 250-ENHANCEDSTATUSCODES
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: > unknown[151.189.21.54]: 250-8BITMIME
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: > unknown[151.189.21.54]: 250 DSN
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: watchdog_pat: 0xb7fb21b0
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: < unknown[151.189.21.54]: MAIL FROM:<xxxxxxxxxxxxxxxxxx> SIZE=3232
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: extract_addr: input: <xxxxxxxxxxxxxxxxxxx>
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: smtpd_check_addr: addr=xxxxxxxxxxxxxxxxx
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: ctable_locate: move existing entry key xxxxxxxxxxxxxx
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: extract_addr: in: <xxxxxxxxxxxxxx>, result: xxxxxxxxxxxxxxxxxxx
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: fsspace: .: block size 4096, blocks free 33102111
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: smtpd_check_queue: blocks 4096 avail 33102111 min_free 0 msg_size_limit 10240000
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: > unknown[151.189.21.54]: 250 2.1.0 Ok
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: watchdog_pat: 0xb7fb21b0
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: < unknown[151.189.21.54]: RCPT TO:<postmaster@xxxxxxx> ORCPT=rfc822;postmaster@xxxxxxxxxxx
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: extract_addr: input: <postmaster@xxxxxxxxxxxxxxxxx>
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: smtpd_check_addr: addr=postmaster@xxxxxxxxxxxxx
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: ctable_locate: move existing entry key postmaster@xxxxxxxxxx
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: extract_addr: in: <postmaster@xxxxxxxxxxx>, result: postmaster@xxxxxxxxxxxx
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: >>> START Sender address RESTRICTIONS <<<
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: generic_checks: name=permit_mynetworks
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: permit_mynetworks: unknown 151.189.21.54
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: match_hostname: unknown ~? 127.0.0.0/8
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: match_hostaddr: 151.189.21.54 ~? 127.0.0.0/8
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: match_list_match: unknown: no match
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: match_list_match: 151.189.21.54: no match
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: generic_checks: name=permit_mynetworks status=0
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: generic_checks: name=reject_unknown_address
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: reject_unknown_address: xxxxxxxxxxxxxxxx
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: ctable_locate: move existing entry key xxxxxxxxxxxxxxxx
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: reject_unknown_mailhost: arcor.de
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: lookup arcor.de type MX flags 0
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: dns_query: arcor.de (MX): Host not found, try again
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: lookup arcor.de type A flags 0
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: dns_query: arcor.de (A): Host not found, try again
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: lookup arcor.de type AAAA flags 0
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: dns_query: arcor.de (AAAA): Host not found, try again
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: generic_checks: name=reject_unknown_address status=0
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: generic_checks: name=reject_unknown_sender_domain
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: reject_unknown_address: jenny-dennis@arcor.de
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: ctable_locate: leave existing entry key jenny-dennis@arcor.de
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: reject_unknown_mailhost: arcor.de
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: lookup arcor.de type MX flags 0
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: dns_query: arcor.de (MX): Host not found, try again
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: lookup arcor.de type A flags 0
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: dns_query: arcor.de (A): Host not found, try again
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: lookup arcor.de type AAAA flags 0
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: dns_query: arcor.de (AAAA): Host not found, try again
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: generic_checks: name=reject_unknown_sender_domain status=0
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: generic_checks: name=reject_non_fqdn_sender
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: reject_non_fqdn_address: jenny-dennis@arcor.de
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: generic_checks: name=reject_non_fqdn_sender status=0
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: >>> END Sender address RESTRICTIONS <<<
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: >>> START Recipient address RESTRICTIONS <<<
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: generic_checks: name=permit_mynetworks
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: permit_mynetworks: unknown 151.189.21.54
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: match_hostname: unknown ~? 127.0.0.0/8
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: match_hostaddr: 151.189.21.54 ~? 127.0.0.0/8
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: match_list_match: unknown: no match
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: match_list_match: 151.189.21.54: no match
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: generic_checks: name=permit_mynetworks status=0
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: generic_checks: name=permit_sasl_authenticated
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: generic_checks: name=permit_sasl_authenticated status=0
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: generic_checks: name=reject_unauth_destination
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: reject_unauth_destination: postmaster@xxxxxxxxxxx
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: permit_auth_destination: postmaster@xxxxxxxxxxxxx
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: ctable_locate: move existing entry key postmaster@xxxxxxxxxxxxxx
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: generic_checks: name=reject_unauth_destination status=0
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: >>> END Recipient address RESTRICTIONS <<<
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: NOQUEUE: reject: RCPT from unknown[151.189.21.54]: 450 4.1.8 <xxxxxxxxxxxxxx>: Sender address rejected: Domain not found; from=<jenny-dennis@arcor.de> to=<postmaster@xxxxxxxxxxx> proto=ESMTP helo=<mail-in-14.arcor-online.net>
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: > unknown[151.189.21.54]: 450 4.1.8 <xxxxxxxxxxxxx>: Sender address rejected: Domain not found
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: watchdog_pat: 0xb7fb21b0
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: < unknown[151.189.21.54]: DATA
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: > unknown[151.189.21.54]: 554 5.5.1[b] Error: no valid recipients[/b]
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: watchdog_pat: 0xb7fb21b0
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: < unknown[151.189.21.54]: RSET
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: > unknown[151.189.21.54]: 250 2.0.0 Ok
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: watchdog_pat: 0xb7fb21b0
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: < unknown[151.189.21.54]: QUIT
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: > unknown[xxxxxxxxxxx]: 221 2.0.0 Bye
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: match_hostname: unknown ~? 127.0.0.0/8
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: match_hostaddr: xxxxxxxxx ~? 127.0.0.0/8
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: match_list_match: unknown: no match
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: match_list_match: xxxxxxxxxxx: no match
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: send attr request = disconnect
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: send attr ident = smtp:xxxxxxxxxxx
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: private/anvil: wanted attribute: status
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: input attribute name: status
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: input attribute value: 0
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: private/anvil: wanted attribute: (list terminator)
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: input attribute name: (end)
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: disconnect from unknown[xxxxxxxxxx]
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: master_notify: status 1
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: connection closed
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: watchdog_stop: 0xb7fb21b0
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: watchdog_start: 0xb7fb21b0



Dovecot log:

Code: Select all

dovecot: Sep 17 16:27:19 Info: auth(default): client in: AUTH   1   PLAIN   service=pop3   lip=9xxxxxx   rip=xxxxxx   lport=110   rport=51151   resp=<hidden>
dovecot: Sep 17 16:27:19 Info: auth(default): passwd-file(postmaster,xxxxxxxx): lookup: user=postmaster file=/var/mail/vhosts/xxxxxxxxx/shadow
dovecot: Sep 17 16:27:19 Info: auth(default): client out: OK   1   user=postmaster
dovecot: Sep 17 16:27:19 Info: auth(default): master in: REQUEST   23   5741   1
dovecot: Sep 17 16:27:19 Info: auth(default): passwd-file(postmaster,xxxxxxxx): lookup: user=postmaster file=/var/mail/vhosts/xxxxxxxxx/passwd
dovecot: Sep 17 16:27:19 Info: auth(default): master out: USER   23   postmaster   uid=5000   gid=5000   home=/var/mail/vhosts/xxxxxxxxx/postmaster
dovecot: Sep 17 16:27:19 Info: pop3-login: Login: user=<postmaster>, method=PLAIN, rip=xxxxxxxx, lip=94.23.58.203
dovecot: Sep 17 16:27:19 Info: POP3(postmaster): Disconnected: Logged out top=0/0, retr=0/0, del=0/0, size=0
dovecot: Sep 17 16:27:20 Info: auth(default): new auth connection: pid=6298



Die Main.cf

Code: Select all

#
# -----------------------------------------------------------------------
# NOTE: Many parameters have already been added to the end of this file
#       by SuSEconfig.postfix. So take care that you don't uncomment
#       and set a parameter without checking whether it has been added
#       to the end of this file.
# -----------------------------------------------------------------------
#
# Global Postfix configuration file. This file lists only a subset
# of all parameters. For the syntax, and for a complete parameter
# list, see the postconf(5) manual page (command: "man 5 postconf").
#
# For common configuration examples, see BASIC_CONFIGURATION_README
# and STANDARD_CONFIGURATION_README. To find these documents, use
# the command "postconf html_directory readme_directory", or go to
# http://www.postfix.org/.
#
# For best results, change no more than 2-3 parameters at a time,
# and test if Postfix still works after every change.

# SOFT BOUNCE
#
# The soft_bounce parameter provides a limited safety net for
# testing.  When soft_bounce is enabled, mail will remain queued that
# would otherwise bounce. This parameter disables locally-generated
# bounces, and prevents the SMTP server from rejecting mail permanently
# (by changing 5xx replies into 4xx replies). However, soft_bounce
# is no cure for address rewriting mistakes or mail routing mistakes.
#
#soft_bounce = no
smtpd_banner = $myhostname ESMTP

# LOCAL PATHNAME INFORMATION
#
# The queue_directory specifies the location of the Postfix queue.
# This is also the root directory of Postfix daemons that run chrooted.
# See the files in examples/chroot-setup for setting up Postfix chroot
# environments on different UNIX systems.
#
queue_directory = /var/spool/postfix

# The command_directory parameter specifies the location of all
# postXXX commands.
#
command_directory = /usr/sbin

# The daemon_directory parameter specifies the location of all Postfix
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
#
daemon_directory = /usr/lib/postfix

# The data_directory parameter specifies the location of Postfix-writable
# data files (caches, random numbers). This directory must be owned
# by the mail_owner account (see below).
#
data_directory = /var/lib/postfix

# QUEUE AND PROCESS OWNERSHIP
#
# The mail_owner parameter specifies the owner of the Postfix queue
# and of most Postfix daemon processes.  Specify the name of a user
# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM.  In
# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
# USER.
#
mail_owner = postfix

# The default_privs parameter specifies the default rights used by
# the local delivery agent for delivery to external file or command.
# These rights are used in the absence of a recipient user context.
# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
#
#default_privs = nobody

# INTERNET HOST AND DOMAIN NAMES
#
# The myhostname parameter specifies the internet hostname of this
# mail system. The default is to use the fully-qualified domain name
# from gethostname(). $myhostname is used as a default value for many
# other configuration parameters.
#
#myhostname = host.domain.tld
#myhostname = virtual.domain.tld

# The mydomain parameter specifies the local internet domain name.
# The default is to use $myhostname minus the first component.
# $mydomain is used as a default value for many other configuration
# parameters.
#
mydomain = ksxxxxxxx.xxxxxxx.com

# SENDING MAIL
#
# The myorigin parameter specifies the domain that locally-posted
# mail appears to come from. The default is to append $myhostname,
# which is fine for small sites.  If you run a domain with multiple
# machines, you should (1) change this to $mydomain and (2) set up
# a domain-wide alias database that aliases each user to
# user@that.users.mailhost.
#
# For the sake of consistency between sender and recipient addresses,
# myorigin also specifies the default domain name that is appended
# to recipient addresses that have no @domain part.
#
myorigin = $mydomain
#myorigin = $mydomain

# RECEIVING MAIL

# The inet_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on.  By default,
# the software claims all active interfaces on the machine. The
# parameter also controls delivery of mail to user@[ip.address].
#
# See also the proxy_interfaces parameter, for network addresses that
# are forwarded to us via a proxy or network address translator.
#
# Note: you need to stop/start Postfix when this parameter changes.
#
inet_interfaces = all
#inet_interfaces = $myhostname
#inet_interfaces = $myhostname, localhost

# The proxy_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on by way of a
# proxy or network address translation unit. This setting extends
# the address list specified with the inet_interfaces parameter.
#
# You must specify your proxy/NAT addresses when your system is a
# backup MX host for other domains, otherwise mail delivery loops
# will happen when the primary MX host is down.
#
#proxy_interfaces =
#proxy_interfaces = 1.2.3.4

# The mydestination parameter specifies the list of domains that this
# machine considers itself the final destination for.
#
# These domains are routed to the delivery agent specified with the
# local_transport parameter setting. By default, that is the UNIX
# compatible delivery agent that lookups all recipients in /etc/passwd
# and /etc/aliases or their equivalent.
#
# The default is $myhostname + localhost.$mydomain.  On a mail domain
# gateway, you should also include $mydomain.
#
# Do not specify the names of virtual domains - those domains are
# specified elsewhere (see VIRTUAL_README).
#
# Do not specify the names of domains that this machine is backup MX
# host for. Specify those names via the relay_domains settings for
# the SMTP server, or use permit_mx_backup if you are lazy (see
# STANDARD_CONFIGURATION_README).
#
# The local machine is always the final destination for mail addressed
# to user@[the.net.work.address] of an interface that the mail system
# receives mail on (see the inet_interfaces parameter).
#
# Specify a list of host or domain names, /file/name or type:table
# patterns, separated by commas and/or whitespace. A /file/name
# pattern is replaced by its contents; a type:table is matched when
# a name matches a lookup key (the right-hand side is ignored).
# Continue long lines by starting the next line with whitespace.
#
# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
#
#mydestination = $myhostname, localhost.$mydomain, localhost
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
#   mail.$mydomain, www.$mydomain, ftp.$mydomain

# REJECTING MAIL FOR UNKNOWN LOCAL USERS
#
# The local_recipient_maps parameter specifies optional lookup tables
# with all names or addresses of users that are local with respect
# to $mydestination, $inet_interfaces or $proxy_interfaces.
#
# If this parameter is defined, then the SMTP server will reject
# mail for unknown local users. This parameter is defined by default.
#
# To turn off local recipient checking in the SMTP server, specify
# local_recipient_maps = (i.e. empty).
#
# The default setting assumes that you use the default Postfix local
# delivery agent for local delivery. You need to update the
# local_recipient_maps setting if:
#
# - You define $mydestination domain recipients in files other than
#   /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
#   For example, you define $mydestination domain recipients in   
#   the $virtual_mailbox_maps files.
#
# - You redefine the local delivery agent in master.cf.
#
# - You redefine the "local_transport" setting in main.cf.
#
# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
#   feature of the Postfix local delivery agent (see local(8)).
#
# Details are described in the LOCAL_RECIPIENT_README file.
#
# Beware: if the Postfix SMTP server runs chrooted, you probably have
# to access the passwd file via the proxymap service, in order to
# overcome chroot restrictions. The alternative, having a copy of
# the system passwd file in the chroot jail is just not practical.
#
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify a bare username, an @domain.tld
# wild-card, or specify a user@domain.tld address.
#
#local_recipient_maps = unix:passwd.byname $alias_maps
#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
#local_recipient_maps =

# The unknown_local_recipient_reject_code specifies the SMTP server
# response code when a recipient domain matches $mydestination or
# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
# and the recipient address or address local-part is not found.
#
# The default setting is 550 (reject mail) but it is safer to start
# with 450 (try again later) until you are certain that your
# local_recipient_maps settings are OK.
#
unknown_local_recipient_reject_code = 550

# TRUST AND RELAY CONTROL

# The mynetworks parameter specifies the list of "trusted" SMTP
# clients that have more privileges than "strangers".
#
# In particular, "trusted" SMTP clients are allowed to relay mail
# through Postfix.  See the smtpd_recipient_restrictions parameter
# in postconf(5).
#
# You can specify the list of "trusted" network addresses by hand
# or you can let Postfix do it for you (which is the default).
#
# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
# clients in the same IP subnetworks as the local machine.
# On Linux, this does works correctly only with interfaces specified
# with the "ifconfig" command.
#
# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
# clients in the same IP class A/B/C networks as the local machine.
# Don't do this with a dialup site - it would cause Postfix to "trust"
# your entire provider's network.  Instead, specify an explicit
# mynetworks list by hand, as described below.

# Specify "mynetworks_style = host" when Postfix should "trust"
# only the local machine.
#
#mynetworks_style = class
#mynetworks_style = subnet
#mynetworks_style = host

# Alternatively, you can specify the mynetworks list by hand, in
# which case Postfix ignores the mynetworks_style setting.
#
# Specify an explicit list of network/netmask patterns, where the
# mask specifies the number of bits in the network part of a host
# address.
#
# You can also specify the absolute pathname of a pattern file instead
# of listing the patterns here. Specify type:table for table-based lookups
# (the value on the table right-hand side is not used).
#
mynetworks = 127.0.0.0/8
#mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128
#mynetworks = $config_directory/mynetworks
#mynetworks = hash:/etc/postfix/network_table

# The relay_domains parameter restricts what destinations this system will
# relay mail to.  See the smtpd_recipient_restrictions description in
# postconf(5) for detailed information.
#
# By default, Postfix relays mail
# - from "trusted" clients (IP address matches $mynetworks) to any destination,
# - from "untrusted" clients to destinations that match $relay_domains or
#   subdomains thereof, except addresses with sender-specified routing.
# The default relay_domains value is $mydestination.
#
# In addition to the above, the Postfix SMTP server by default accepts mail
# that Postfix is final destination for:
# - destinations that match $inet_interfaces or $proxy_interfaces,
# - destinations that match $mydestination
# - destinations that match $virtual_alias_domains,
# - destinations that match $virtual_mailbox_domains.
# These destinations do not need to be listed in $relay_domains.
#
# Specify a list of hosts or domains, /file/name patterns or type:name
# lookup tables, separated by commas and/or whitespace.  Continue
# long lines by starting the next line with whitespace. A file name
# is replaced by its contents; a type:name table is matched when a
# (parent) domain appears as lookup key.
#
# NOTE: Postfix will not automatically forward mail for domains that
# list this system as their primary or backup MX host. See the
# permit_mx_backup restriction description in postconf(5).
#
#relay_domains = $mydestination

# INTERNET OR INTRANET

# The relayhost parameter specifies the default host to send mail to
# when no entry is matched in the optional transport(5) table. When
# no relayhost is given, mail is routed directly to the destination.
#
# On an intranet, specify the organizational domain name. If your
# internal DNS uses no MX records, specify the name of the intranet
# gateway host instead.
#
# In the case of SMTP, specify a domain, host, host:port, [host]:port,
# [address] or [address]:port; the form [host] turns off MX lookups.
#
# If you're connected via UUCP, see also the default_transport parameter.
#
#relayhost = $mydomain
#relayhost = [gateway.my.domain]
#relayhost = [mailserver.isp.tld]
#relayhost = uucphost
#relayhost = [an.ip.add.ress]

# REJECTING UNKNOWN RELAY USERS
#
# The relay_recipient_maps parameter specifies optional lookup tables
# with all addresses in the domains that match $relay_domains.
#
# If this parameter is defined, then the SMTP server will reject
# mail for unknown relay users. This feature is off by default.
#
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify an @domain.tld wild-card, or specify
# a user@domain.tld address.
#
#relay_recipient_maps = hash:/etc/postfix/relay_recipients

# INPUT RATE CONTROL
#
# The in_flow_delay configuration parameter implements mail input
# flow control. This feature is turned on by default, although it
# still needs further development (it's disabled on SCO UNIX due
# to an SCO bug).
#
# A Postfix process will pause for $in_flow_delay seconds before
# accepting a new message, when the message arrival rate exceeds the
# message delivery rate. With the default 100 SMTP server process
# limit, this limits the mail inflow to 100 messages a second more
# than the number of messages delivered per second.
#
# Specify 0 to disable the feature. Valid delays are 0..10.
#
#in_flow_delay = 1s

# ADDRESS REWRITING
#
# The ADDRESS_REWRITING_README document gives information about
# address masquerading or other forms of address rewriting including
# username->Firstname.Lastname mapping.

# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
#
# The VIRTUAL_README document gives information about the many forms
# of domain hosting that Postfix supports.

# "USER HAS MOVED" BOUNCE MESSAGES
#
# See the discussion in the ADDRESS_REWRITING_README document.

# TRANSPORT MAP
#
# See the discussion in the ADDRESS_REWRITING_README document.

# ALIAS DATABASE
#
# The alias_maps parameter specifies the list of alias databases used
# by the local delivery agent. The default list is system dependent.
#
# On systems with NIS, the default is to search the local alias
# database, then the NIS alias database. See aliases(5) for syntax
# details.
#
# If you change the alias database, run "postalias /etc/aliases" (or
# wherever your system stores the mail alias file), or simply run
# "newaliases" to build the necessary DBM or DB file.
#
# It will take a minute or so before changes become visible.  Use
# "postfix reload" to eliminate the delay.
#
#alias_maps = dbm:/etc/aliases
#alias_maps = hash:/etc/aliases
#alias_maps = hash:/etc/aliases, nis:mail.aliases
#alias_maps = netinfo:/aliases

# The alias_database parameter specifies the alias database(s) that
# are built with "newaliases" or "sendmail -bi".  This is a separate
# configuration parameter, because alias_maps (see above) may specify
# tables that are not necessarily all under control by Postfix.
#
#alias_database = dbm:/etc/aliases
#alias_database = dbm:/etc/mail/aliases
#alias_database = hash:/etc/aliases
#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases

# ADDRESS EXTENSIONS (e.g., user+foo)
#
# The recipient_delimiter parameter specifies the separator between
# user names and address extensions (user+foo). See canonical(5),
# local(8), relocated(5) and virtual(5) for the effects this has on
# aliases, canonical, virtual, relocated and .forward file lookups.
# Basically, the software tries user+foo and .forward+foo before
# trying user and .forward.
#
#recipient_delimiter = +

# DELIVERY TO MAILBOX
#
# The home_mailbox parameter specifies the optional pathname of a
# mailbox file relative to a user's home directory. The default
# mailbox file is /var/spool/mail/user or /var/mail/user.  Specify
# "Maildir/" for qmail-style delivery (the / is required).
#
#home_mailbox = Mailbox
home_mailbox = Maildir/
 
# The mail_spool_directory parameter specifies the directory where
# UNIX-style mailboxes are kept. The default setting depends on the
# system type.
#
#mail_spool_directory = /var/mail
#mail_spool_directory = /var/spool/mail

# The mailbox_command parameter specifies the optional external
# command to use instead of mailbox delivery. The command is run as
# the recipient with proper HOME, SHELL and LOGNAME environment settings.
# Exception:  delivery for root is done as $default_user.
#
# Other environment variables of interest: USER (recipient username),
# EXTENSION (address extension), DOMAIN (domain part of address),
# and LOCAL (the address localpart).
#
# Unlike other Postfix configuration parameters, the mailbox_command
# parameter is not subjected to $parameter substitutions. This is to
# make it easier to specify shell syntax (see example below).
#
# Avoid shell meta characters because they will force Postfix to run
# an expensive shell process. Procmail alone is expensive enough.
#
# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
#
#mailbox_command = /some/where/procmail
#mailbox_command = /some/where/procmail -a "$EXTENSION"

# The mailbox_transport specifies the optional transport in master.cf
# to use after processing aliases and .forward files. This parameter
# has precedence over the mailbox_command, fallback_transport and
# luser_relay parameters.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf.  The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for   
# non-UNIX accounts with "User unknown in local recipient table".
#
#mailbox_transport = lmtp:unix:/file/name
#mailbox_transport = cyrus

# The fallback_transport specifies the optional transport in master.cf
# to use for recipients that are not found in the UNIX passwd database.
# This parameter has precedence over the luser_relay parameter.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf.  The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for   
# non-UNIX accounts with "User unknown in local recipient table".
#
#fallback_transport = lmtp:unix:/file/name
#fallback_transport = cyrus
#fallback_transport =

# The luser_relay parameter specifies an optional destination address
# for unknown recipients.  By default, mail for unknown@$mydestination,
# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
# as undeliverable.
#
# The following expansions are done on luser_relay: $user (recipient
# username), $shell (recipient shell), $home (recipient home directory),
# $recipient (full recipient address), $extension (recipient address
# extension), $domain (recipient domain), $local (entire recipient
# localpart), $recipient_delimiter. Specify ${name?value} or
# ${name:value} to expand value only when $name does (does not) exist.
#
# luser_relay works only for the default Postfix local delivery agent.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must specify "local_recipient_maps =" (i.e. empty) in
# the main.cf file, otherwise the SMTP server will reject mail for   
# non-UNIX accounts with "User unknown in local recipient table".
#
#luser_relay = $user@other.host
#luser_relay = $local@other.host
#luser_relay = admin+$local
 
# JUNK MAIL CONTROLS
#
# The controls listed here are only a very small subset. The file
# SMTPD_ACCESS_README provides an overview.

# The header_checks parameter specifies an optional table with patterns
# that each logical message header is matched against, including
# headers that span multiple physical lines.
#
# By default, these patterns also apply to MIME headers and to the
# headers of attached messages. With older Postfix versions, MIME and
# attached message headers were treated as body text.
#
# For details, see "man header_checks".
#
#header_checks = regexp:/etc/postfix/header_checks

# FAST ETRN SERVICE
#
# Postfix maintains per-destination logfiles with information about
# deferred mail, so that mail can be flushed quickly with the SMTP
# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
# See the ETRN_README document for a detailed description.
#
# The fast_flush_domains parameter controls what destinations are
# eligible for this service. By default, they are all domains that
# this server is willing to relay mail to.
#
#fast_flush_domains = $relay_domains

# SHOW SOFTWARE VERSION OR NOT
#
# The smtpd_banner parameter specifies the text that follows the 220
# code in the SMTP server's greeting banner. Some people like to see
# the mail version advertised. By default, Postfix shows no version.
#
# You MUST specify $myhostname at the start of the text. That is an
# RFC requirement. Postfix itself does not care.
#
#smtpd_banner = $myhostname ESMTP $mail_name
#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)

# PARALLEL DELIVERY TO THE SAME DESTINATION
#
# How many parallel deliveries to the same user or domain? With local
# delivery, it does not make sense to do massively parallel delivery
# to the same user, because mailbox updates must happen sequentially,
# and expensive pipelines in .forward files can cause disasters when
# too many are run at the same time. With SMTP deliveries, 10
# simultaneous connections to the same domain could be sufficient to
# raise eyebrows.
#
# Each message delivery transport has its XXX_destination_concurrency_limit
# parameter.  The default is $default_destination_concurrency_limit for
# most delivery transports. For the local delivery agent the default is 2.

#local_destination_concurrency_limit = 2
#default_destination_concurrency_limit = 20

# DEBUGGING CONTROL
#
# The debug_peer_level parameter specifies the increment in verbose
# logging level when an SMTP client or server host name or address
# matches a pattern in the debug_peer_list parameter.
#

# The debug_peer_list parameter specifies an optional list of domain
# or network patterns, /file/name patterns or type:name tables. When
# an SMTP client or server host name or address matches a pattern,
# increase the verbose logging level by the amount specified in the
# debug_peer_level parameter.
#
#debug_peer_list = 127.0.0.1
#debug_peer_list = some.domain

# The debugger_command specifies the external command that is executed
# when a Postfix daemon program is run with the -D option.
#
# Use "command .. & sleep 5" so that the debugger can attach before
# the process marches on. If you use an X-based debugger, be sure to
# set up your XAUTHORITY environment variable before starting Postfix.
#
debugger_command =
    PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
    ddd $daemon_directory/$process_name $process_id & sleep 5

# If you can't use X, use this to capture the call stack when a
# daemon crashes. The result is in a file in the configuration
# directory, and is named after the process name and the process ID.
#
# debugger_command =
#   PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
#   echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
#   >$config_directory/$process_name.$process_id.log & sleep 5
#
# Another possibility is to run gdb under a detached screen session.
# To attach to the screen sesssion, su root and run "screen -r
# <id_string>" where <id_string> uniquely matches one of the detached
# sessions (from "screen -list").
#
# debugger_command =
#   PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
#   -dmS $process_name gdb $daemon_directory/$process_name
#   $process_id & sleep 1

# INSTALL-TIME CONFIGURATION INFORMATION
#
# The following parameters are used when installing a new Postfix version.
#
# sendmail_path: The full pathname of the Postfix sendmail command.
# This is the Sendmail-compatible mail posting interface.
#
sendmail_path = /usr/sbin/sendmail

# newaliases_path: The full pathname of the Postfix newaliases command.
# This is the Sendmail-compatible command to build alias databases.
#
newaliases_path = /usr/bin/newaliases

# mailq_path: The full pathname of the Postfix mailq command.  This
# is the Sendmail-compatible mail queue listing command.
#
mailq_path = /usr/bin/mailq

# setgid_group: The group for mail submission and queue management
# commands.  This must be a group name with a numerical group ID that
# is not shared with other accounts, not even with the Postfix account.
#
setgid_group = maildrop

# html_directory: The location of the Postfix HTML documentation.
#
html_directory = /usr/share/doc/packages/postfix-doc/html

# manpage_directory: The location of the Postfix on-line manual pages.
#
manpage_directory = /usr/share/man

# sample_directory: The location of the Postfix sample configuration files.
# This parameter is obsolete as of Postfix 2.1.
#
sample_directory = /usr/share/doc/packages/postfix-doc/samples

# readme_directory: The location of the Postfix README files.
#
readme_directory = /usr/share/doc/packages/postfix-doc/README_FILES
inet_protocols = all
biff = yes
append_dot_mydomain = yes
recipient_delimiter = +
readme_directory = no

mail_spool_directory = /var/mail

sender_canonical_maps = hash:/etc/postfix/sender_canonical
masquerade_exceptions = root
masquerade_classes = envelope_sender, header_sender, header_recipient
myhostname = ks3xxxxx.xxxxx.com
delay_warning_time = 1h
message_strip_characters = \0
program_directory = /usr/lib/postfix
masquerade_domains =
mydestination = localhost
disable_dns_lookups = no
strict_8bitmime = no
disable_mime_output_conversion = no
smtpd_helo_required = yes
smtpd_helo_restrictions =
smtpd_helo_restrictions =
strict_rfc821_envelopes = no
smtp_sasl_auth_enable = no

broken_sasl_auth_clients = yes


smtpd_sender_restrictions = permit_mynetworks, reject_unknown_address, reject_unknown_sender_domain, reject_non_fqdn_sender
smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination
smtpd_recipient_limit = 250

smtp_use_tls = yes
alias_maps = hash:/etc/aliases
message_size_limit = 10240000

smtpd_sasl_auth_enable = yes
smtpd_sasl_type = dovecot
smtpd_sasl_path = private/auth
smtpd_sasl_security_options = noanonymous
smtpd_sasl_local_domain = $mydomain



virtual_mailbox_domains = /etc/postfix/virtual_domains
virtual_mailbox_base = /var/mail/vhosts
virtual_mailbox_maps = hash:/etc/postfix/vmailbox
virtual_alias_maps = hash:/etc/postfix/virtual_domains
virtual_minimum_uid = 100
virtual_uid_maps = static:5000
virtual_gid_maps = static:5000
virtual_transport = dovecot
dovecot_destination_recipient_limit = 1
mailbox_size_limit = 0


master.cf

Code: Select all

#
# Postfix master process configuration file.  For details on the format
# of the file, see the Postfix master(5) manual page.
#
# ==========================================================================
# service type  private unpriv  chroot  wakeup  maxproc command + args
#               (yes)   (yes)   (yes)   (never) (100)
# ==========================================================================
smtp      inet  n       -       -       -       -       smtpd -vv
#submission inet n      -       n       -       -       smtpd
#   -o smtpd_etrn_restrictions=reject
#   -o smtpd_client_restrictions=permit_sasl_authenticated,reject
#smtps    inet  n       -       n       -       -       smtpd -o smtpd_tls_wrappermode=yes
#  -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes
#submission   inet    n       -       n       -       -       smtpd
#  -o smtpd_etrn_restrictions=reject
#  -o smtpd_enforce_tls=yes -o smtpd_sasl_auth_enable=yes
#628      inet  n       -       n       -       -       qmqpd
pickup    fifo  n       -       n       60      1       pickup
cleanup   unix  n       -       n       -       0       cleanup
qmgr      fifo  n       -       n       300     1       qmgr
#qmgr     fifo  n       -       n       300     1       oqmgr
#tlsmgr    unix  -       -       n       1000?   1       tlsmgr
rewrite   unix  -       -       n       -       -       trivial-rewrite
bounce    unix  -       -       n       -       0       bounce
defer     unix  -       -       n       -       0       bounce
trace     unix  -       -       n       -       0       bounce
verify    unix  -       -       n       -       1       verify
flush     unix  n       -       n       1000?   0       flush
proxymap  unix  -       -       n       -       -       proxymap
smtp      unix  -       -       n       -       -       smtp
# When relaying mail as backup MX, disable fallback_relay to avoid MX loops
relay     unix  -       -       n       -       -       smtp
   -o fallback_relay=
#       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq     unix  n       -       n       -       -       showq
error     unix  -       -       n       -       -       error
discard   unix  -       -       n       -       -       discard
local     unix  -       n       n       -       -       local
virtual   unix  -       n       n       -       -       virtual
lmtp      unix  -       -       n       -       -       lmtp
anvil     unix  -       -       n       -       1       anvil
#localhost:10025 inet   n   -   n   -   -   smtpd -o content_filter=
scache     unix   -   -   n   -   1   scache
#
# ====================================================================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# Many of the following services use the Postfix pipe(8) delivery
# agent.  See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ====================================================================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
maildrop  unix  -       n       n       -       -       pipe
  flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient}
cyrus     unix   -   n   n   -   -   pipe
  user=cyrus argv=/usr/lib/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
uucp     unix   -   n   n   -   -   pipe
  flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
ifmail    unix  -       n       n       -       -       pipe
  flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp     unix  -       n       n       -       -       pipe
  flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient
procmail  unix  -       n       n       -       -       pipe
  flags=R user=nobody argv=/usr/bin/procmail -t -m /etc/procmailrc ${sender} ${recipient}
retry     unix   -   -   n   -   -   error
proxywrite unix   -   -   n   -   1   proxymap
dovecot   unix  -       n       n       -       -       pipe
  flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${recipient}tlsmgr    unix  -       -       n       1000?   1       tlsmgr
tlsmgr    unix  -       -       n       1000?   1       tlsmgr



Dovecot.conf


[code]## Dovecot configuration file

# If you're in a hurry, see http://wiki.dovecot.org/QuickConfiguration

# "dovecot -n" command gives a clean output of the changed settings. Use it
# instead of copy&pasting this file when posting to the Dovecot mailing list.

# '#' character and everything after it is treated as comments. Extra spaces
# and tabs are ignored. If you want to use either of these explicitly, put the
# value inside quotes, eg.: key = "# char and trailing whitespace "

# Default values are shown for each setting, it's not required to uncomment
# any of the lines. Exception to this are paths, they're just examples with
# the real defaults being based on configure options. The paths listed here
# are for configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var
# --with-ssldir=/etc/ssl

# Base directory where to store runtime data.
#base_dir = /var/run/dovecot/

# Protocols we want to be serving: imap imaps pop3 pop3s managesieve
# If you only want to use dovecot-auth, you can set this to "none".
protocols = imap imaps pop3 pop3s

# A space separated list of IP or host addresses where to listen in for
# connections. "*" listens in all IPv4 interfaces. "[::]" listens in all IPv6
# interfaces. Use "*, [::]" for listening both IPv4 and IPv6.
#
# If you want to specify ports for each service, you will need to configure
# these settings inside the protocol imap/pop3/managesieve { ... } section,
# so you can specify different ports for IMAP/POP3/MANAGESIEVE. For example:
# protocol imap {
# listen = *:10143
# ssl_listen = *:10943
# ..
# }
# protocol pop3 {
# listen = *:10100
# ..
# }
# protocol managesieve {
# listen = *:12000
# ..
# }
#listen = *

# Disable LOGIN command and all other plaintext authentications unless
# SSL/TLS is used (LOGINDISABLED capability). Note that if the remote IP
# matches the local IP (ie. you're connecting from the same computer), the
# connection is considered secure and plaintext authentication is allowed.
disable_plaintext_auth = no

# Should all IMAP and POP3 processes be killed when Dovecot master process
# shuts down. Setting this to "no" means that Dovecot can be upgraded without
# forcing existing client connections to close (although that could also be
# a problem if the upgrade is eg. because of a security fix). This however
# means that after master process has died, the client processes can't write
# to log files anymore.
#shutdown_clients = yes

##
## Logging
##

# Log file to use for error messages, instead of sending them to syslog.
# /dev/stderr can be used to log into stderr.
log_path = /var/log/dovecot


# Log file to use for informational and debug messages.
# Default is the same as log_path.
#info_log_path =

# Prefix for each line written to log file. % codes are in strftime(3)
# format.
#log_timestamp = "%b %d %H:%M:%S "

# Syslog facility to use if you're logging to syslog. Usually if you don't
# want to use "mail", you'll use local0..local7. Also other standard
# facilities are supported.
#syslog_facility = mail

##
## SSL settings
##

# IP or host address where to listen in for SSL connections. Defaults
# to above if not specified.
#ssl_listen =

# Disable SSL/TLS support.
ssl_disable = yes

# PEM encoded X.509 SSL/TLS certificate and private key. They're opened before
# dropping root privileges, so keep the key file unreadable by anyone but
# root. Included doc/mkcert.sh can be used to easily generate self-signed
# certificate, just make sure to update the domains in dovecot-openssl.cnf
#ssl_cert_file = /etc/ssl/certs/dovecot.pem
#ssl_key_file = /etc/ssl/private/dovecot.pem

# If key file is password protected, give the password here. Alternatively
# give it when starting dovecot with -p parameter. Since this file is often
# world-readable, you may want to place this setting instead to a different
# root owned 0600 file by using !include_try <path>.
#ssl_key_password =

# File containing trusted SSL certificate authorities. Set this only if you
# intend to use ssl_verify_client_cert=yes. The CAfile should contain the
# CA-certificate(s) followed by the matching CRL(s).
#ssl_ca_file =

# Request client to send a certificate. If you also want to require it, set
# ssl_require_client_cert=yes in auth section.
#ssl_verify_client_cert = no

# Which field from certificate to use for username. commonName and
# x500UniqueIdentifier are the usual choices. You'll also need to set
# ssl_username_from_cert=yes.
#ssl_cert_username_field = commonName

# How often to regenerate the SSL parameters file. Generation is quite CPU
# intensive operation. The value is in hours, 0 disables regeneration
# entirely.
#ssl_parameters_regenerate = 168

# SSL ciphers to use
#ssl_cipher_list = ALL:!LOW:!SSLv2

# Show protocol level SSL errors.
#verbose_ssl = no

##
## Login processes
##

# <doc/wiki/LoginProcess.txt>

# Directory where authentication process places authentication UNIX sockets
# which login needs to be able to connect to. The sockets are created when
# running as root, so you don't have to worry about permissions. Note that
# everything in this directory is deleted when Dovecot is started.
#login_dir = /var/run/dovecot/login

# chroot login process to the login_dir. Only reason not to do this is if you
# wish to run the whole Dovecot without roots. <doc/wiki/Rootless.txt>
#login_chroot = yes

# User to use for the login process. Create a completely new user for this,
# and don't use it anywhere else. The user must also belong to a group where
# only it has access, it's used to control access for authentication process.
# Note that this user is NOT used to access mails. <doc/wiki/UserIds.txt>
#login_user = dovecot

# Set max. process size in megabytes. If you don't use
# login_process_per_connection you might need to grow this.
#login_process_size = 64

# Should each login be processed in it's own process (yes), or should one
# login process be allowed to process multiple connections (no)? Yes is more
# secure, espcially with SSL/TLS enabled. No is faster since there's no need
# to create processes all the time.
#login_process_per_connection = yes

# Number of login processes to keep for listening new connections.
#login_processes_count = 3

# Maximum number of login processes to create. The listening process count
# usually stays at login_processes_count, but when multiple users start logging
# in at the same time more extra processes are created. To prevent fork-bombing
# we check only once in a second if new processes should be created - if all
# of them are used at the time, we double their amount until the limit set by
# this setting is reached.
#login_max_processes_count = 128

# Maximum number of connections allowed per each login process. This setting
# is used only if login_process_per_connection=no. Once the limit is reached,
# the process notifies master so that it can create a new login process.
#login_max_connections = 256

# Greeting message for clients.
#login_greeting = Dovecot ready.

# Space-separated list of elements we want to log. The elements which have
# a non-empty variable value are joined together to form a comma-separated
# string.
#login_log_format_elements = user=<%u> method=%m rip=%r lip=%l %c

# Login log format. %$ contains login_log_format_elements string, %s contains
# the data we want to log.
#login_log_format = %$: %s

##
## Mailbox locations and namespaces
##

# Location for users' mailboxes. This is the same as the old default_mail_env
# setting. The default is empty, which means that Dovecot tries to find the
# mailboxes automatically. This won't work if the user doesn't have any mail
# yet, so you should explicitly tell Dovecot the full location.
#
# If you're using mbox, giving a path to the INBOX file (eg. /var/mail/%u)
# isn't enough. You'll also need to tell Dovecot where the other mailboxes are
# kept. This is called the "root mail directory", and it must be the first
# path given in the mail_location setting.
#
# There are a few special variables you can use, eg.:
#
# %u - username
# %n - user part in user@domain, same as %u if there's no domain
# %d - domain part in user@domain, empty if there's no domain
# %h - home directory
#
# See doc/wiki/Variables.txt for full list. Some examples:
#
# mail_location = maildir:~/Maildir
# mail_location = mbox:~/mail:INBOX=/var/mail/%u
# mail_location = mbox:/var/mail/%d/%1n/%n:INDEX=/var/indexes/%d/%1n/%n
#
# <doc/wiki/MailLocation.txt>
#
mail_location = maildir:/var/mail/vhosts/dhm-server.de/%n

# If you need to set multiple mailbox locations or want to change default
# namespace settings, you can do it by defining namespace sections.
# NOTE: Namespaces currently work ONLY with IMAP! POP3 and LDA currently ignore
# namespaces completely, they use only the mail_location setting.
#
# You can have private, shared and public namespaces. The only difference
# between them is how Dovecot announces them to client via NAMESPACE
# extension. Shared namespaces are meant for user-owned mailboxes which are
# shared to other users, while public namespaces are for more globally
# accessible mailboxes.
#
# REMEMBER: If you add any namespaces, the default namespace must be added
# explicitly, ie. mail_location does nothing unless you have a namespace
# without a location setting. Default namespace is simply done by having a
# namespace with empty prefix.
#namespace private {
# Hierarchy separator to use. You should use the same separator for all
# namespaces or some clients get confused. '/' is usually a good one.
# The default however depends on the underlying mail storage format.
#separator =

# Prefix required to access this namespace. This needs to be different for
# all namespaces. For example "Public/".
#prefix =

# Physical location of the mailbox. This is in same format as
# mail_location, which is also the default for it.
#location =

# There can be only one INBOX, and this setting defines which namespace
# has it.
#inbox = no

# If namespace is hidden, it's not advertised to clients via NAMESPACE
# extension. You'll most likely also want to set list=no. This is mostly
# useful when converting from another server with different namespaces which
# you want to deprecate but still keep working. For example you can create
# hidden namespaces with prefixes "~/mail/", "~%u/mail/" and "mail/".
#hidden = yes

# Show the mailboxes under this namespace with LIST command. This makes the
# namespace visible for clients that don't support NAMESPACE extension.
#list = yes

# Namespace handles its own subscriptions. If set to "no", the parent
# namespace handles them (empty prefix should always have this as "yes")
#subscriptions = yes
#}

# System user and group used to access mails. If you use multiple, userdb
# can override these by returning uid or gid fields. You can use either numbers
# or names. <doc/wiki/UserIds>
#mail_uid =
#mail_gid =

# Group to enable temporarily for privileged operations. Currently this is
# used only with INBOX when either its initial creation or dotlocking fails.
# Typically this is set to "mail" to give access to /var/mail.
#mail_privileged_group =

# Grant access to these supplementary groups for mail processes&#
Last edited by thestealth on 2009-09-18 09:22, edited 1 time in total.
Top

Roger Wilco
Administrator
Administrator
Posts: 6001
Joined: 2004-05-23 12:53

Re: Postfix + Dovecot Emails werden nicht abgelegt Senden von aussen möglich

Post by Roger Wilco »

`postconf -n` und `dovecot -n` reichen für die Postfix- bzw. Dovecot-Konfiguration normalerweise aus. Damit müssen wir nicht unendlich viele Einstellungen durchgehen, die sowieso dem Standardwert entsprechen.

thestealth wrote:mail.info

Code: Select all

Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: NOQUEUE: reject: RCPT from unknown[151.189.21.54]: 450 4.1.8 <xxxxxxxxxxxxxx>: Sender address rejected: Domain not found; from=<jenny-dennis@arcor.de> to=<postmaster@xxxxxxxxxxx> proto=ESMTP helo=<mail-in-14.arcor-online.net>
Sep 17 16:27:17 ks302013 postfix/smtpd[6248]: > unknown[151.189.21.54]: 450 4.1.8 <xxxxxxxxxxxxx>: Sender address rejected: Domain not found


thestealth wrote:Die Main.cf

Code: Select all

virtual_mailbox_domains = /etc/postfix/virtual_domains
virtual_mailbox_base = /var/mail/vhosts
virtual_mailbox_maps = hash:/etc/postfix/vmailbox
virtual_alias_maps = hash:/etc/postfix/virtual_domains

Die angegebenen Dateien solltest du auf Korrektheit prüfen. Insbesondere, ob die beanstandete Domain vorhanden ist und ob du nicht vergessen hast, postmap auszuführen.
Top

thestealth
Posts: 8
Joined: 2009-09-17 16:18

Re: Postfix + Dovecot Emails werden nicht abgelegt Senden von aussen möglich

Post by thestealth »

naja die bestandete Domain ist ja die Addy von der ich zu dem Server hin verschickt habe die darf ja nicht in den virtuals sein sonst müsste ich ja jede erdenkliche Domain dort eintragen.

Irgendwo habe ich gelesen das er dann die Absender Domain nicht auflösen kann nur wie beige ich das gerade das ist eine @arcor.de addy.

Die virtual domains dort ist die domain drinne an die die email gehen sollte in

Code: Select all

dhm-xxxxxx.de
ksxxxxx.xxxxx.com


in vmailbox

Code: Select all

postmaster@dhm-xxxxx.de dhm-xxxxx.de/postmaster/
root@dhm-xxxxx.de dhm-xxxxx.de/root/
webmaster@dhm-xxxxx.de dhm-server.de/webmaster/



Ich check seid heute garnichts mehr Ordner anlegen über TB geht auch



Postconf

Code: Select all

alias_maps = hash:/etc/aliases
append_dot_mydomain = yes
biff = yes
broken_sasl_auth_clients = yes
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/lib/postfix
data_directory = /var/lib/postfix
delay_warning_time = 1h
disable_dns_lookups = no
disable_mime_output_conversion = no
home_mailbox = Maildir/
html_directory = /usr/share/doc/packages/postfix-doc/html
inet_interfaces = all
inet_protocols = all
mail_owner = postfix
mail_spool_directory = /var/mail
mailbox_size_limit = 0
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
masquerade_classes = envelope_sender, header_sender, header_recipient
masquerade_domains =
masquerade_exceptions = root
message_size_limit = 10240000
message_strip_characters = \0
mydestination = localhost
mydomain = ks302013.kimsufi.com
myhostname = ks302013.kimsufi.com
mynetworks = 127.0.0.0/8
myorigin = $mydomain
newaliases_path = /usr/bin/newaliases
queue_directory = /var/spool/postfix
readme_directory = no
recipient_delimiter = +
sample_directory = /usr/share/doc/packages/postfix-doc/samples
sender_canonical_maps = hash:/etc/postfix/sender_canonical
sendmail_path = /usr/sbin/sendmail
setgid_group = maildrop
smtp_sasl_auth_enable = no
smtp_use_tls = yes
smtpd_banner = $myhostname ESMTP
smtpd_helo_required = yes
smtpd_helo_restrictions =
smtpd_recipient_limit = 250
smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination
smtpd_sasl_auth_enable = yes
smtpd_sasl_local_domain = $mydomain
smtpd_sasl_path = private/auth
smtpd_sasl_security_options = noanonymous
smtpd_sasl_type = dovecot
smtpd_sender_restrictions = permit_mynetworks, reject_unknown_address, reject_unknown_sender_domain, reject_non_fqdn_sender
strict_8bitmime = no
strict_rfc821_envelopes = no
unknown_local_recipient_reject_code = 550
virtual_alias_maps = hash:/etc/postfix/virtual_domains
virtual_gid_maps = static:5000
virtual_mailbox_base = /var/mail/vhosts
virtual_mailbox_domains = /etc/postfix/virtual_domains
virtual_mailbox_maps = hash:/etc/postfix/vmailbox
virtual_minimum_uid = 100
virtual_transport = dovecot
virtual_uid_maps = static:5000


dovecot

Code: Select all

# 1.1.7: /etc/dovecot/dovecot.conf
# OS: Linux 2.6.27.10-grsec-xxxx-grs-ipv4-32 i686 openSUSE 11.1 (i586) ext3
log_path: /var/log/dovecot
protocols: imap imaps pop3 pop3s
ssl_disable: yes
disable_plaintext_auth: no
login_dir: /var/run/dovecot/login
login_executable(default): /usr/lib/dovecot/imap-login
login_executable(imap): /usr/lib/dovecot/imap-login
login_executable(pop3): /usr/lib/dovecot/pop3-login
mail_location: maildir:/var/mail/vhosts/dhm-server.de/%n
mail_executable(default): /usr/lib/dovecot/imap
mail_executable(imap): /usr/lib/dovecot/imap
mail_executable(pop3): /usr/lib/dovecot/pop3
mail_plugin_dir(default): /usr/lib/dovecot/modules/imap
mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap
mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3
auth default:
  mechanisms: plain login
  debug: yes
  passdb:
    driver: passwd-file
    args: /var/mail/vhosts/dhm-server.de/shadow
  userdb:
    driver: passwd-file
    args: /var/mail/vhosts/dhm-server.de/passwd
  socket:
    type: listen
    client:
      path: /var/spool/postfix/private/auth
      mode: 432
      user: postfix
      group: vmail
    master:
      path: /var/run/dovecot/auth-master
      mode: 384
      user: vmail
      group: vmail
Top

Roger Wilco
Administrator
Administrator
Posts: 6001
Joined: 2004-05-23 12:53

Re: Postfix + Dovecot Emails werden nicht abgelegt Senden von aussen möglich

Post by Roger Wilco »

thestealth wrote:naja die bestandete Domain ist ja die Addy von der ich zu dem Server hin verschickt habe die darf ja nicht in den virtuals sein sonst müsste ich ja jede erdenkliche Domain dort eintragen.

Ja, mein Fehler.

thestealth wrote:Irgendwo habe ich gelesen das er dann die Absender Domain nicht auflösen kann nur wie beige ich das gerade das ist eine @arcor.de addy.

Du musst deine smtpd_client_restrictions lockern. Dabei kannst du dich z. B. an http://www.rootforum.org/wiki/mailserver/postfix orientieren.
Top

thestealth
Posts: 8
Joined: 2009-09-17 16:18

Re: Postfix + Dovecot Emails werden nicht abgelegt Senden von aussen möglich

Post by thestealth »

habs geändert nun siehts so aus


mail.info

Code: Select all

Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: connection established
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: master_notify: status 0
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: name_mask: resource
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: name_mask: software
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: xsasl_dovecot_server_create: SASL service=smtp, realm=ks302013.kimsufi.com
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: name_mask: noanonymous
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: xsasl_dovecot_server_mech_filter: keep mechanism: PLAIN
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: xsasl_dovecot_server_mech_filter: keep mechanism: LOGIN
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: connect from unknown[151.189.21.55]
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: match_list_match: unknown: no match
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: match_list_match: 151.189.21.55: no match
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: match_list_match: unknown: no match
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: match_list_match: 151.189.21.55: no match
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: match_hostname: unknown ~? 127.0.0.0/8
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: match_hostaddr: 151.189.21.55 ~? 127.0.0.0/8
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: match_list_match: unknown: no match
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: match_list_match: 151.189.21.55: no match
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: send attr request = connect
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: send attr ident = smtp:151.189.21.55
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: private/anvil: wanted attribute: status
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: input attribute name: status
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: input attribute value: 0
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: private/anvil: wanted attribute: count
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: input attribute name: count
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: input attribute value: 1
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: private/anvil: wanted attribute: rate
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: input attribute name: rate
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: input attribute value: 1
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: private/anvil: wanted attribute: (list terminator)
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: input attribute name: (end)
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: > unknown[151.189.21.55]: 220 ks302013.kimsufi.com ESMTP
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: watchdog_pat: 0xb80b1348
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: < unknown[151.189.21.55]: EHLO mail-in-15.arcor-online.net
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: > unknown[151.189.21.55]: 250-ks302013.kimsufi.com
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: > unknown[151.189.21.55]: 250-PIPELINING
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: > unknown[151.189.21.55]: 250-SIZE 10240000
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: > unknown[151.189.21.55]: 250-VRFY
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: > unknown[151.189.21.55]: 250-ETRN
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: > unknown[151.189.21.55]: 250-AUTH PLAIN LOGIN
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: match_list_match: unknown: no match
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: match_list_match: 151.189.21.55: no match
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: > unknown[151.189.21.55]: 250-AUTH=PLAIN LOGIN
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: > unknown[151.189.21.55]: 250-ENHANCEDSTATUSCODES
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: > unknown[151.189.21.55]: 250-8BITMIME
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: > unknown[151.189.21.55]: 250 DSN
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: watchdog_pat: 0xb80b1348
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: < unknown[151.189.21.55]: MAIL FROM:<jenny-dennis@arcor.de> SIZE=3230
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: extract_addr: input: <jenny-dennis@arcor.de>
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: smtpd_check_addr: addr=jenny-dennis@arcor.de
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: ctable_locate: move existing entry key jenny-dennis@arcor.de
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: extract_addr: in: <jenny-dennis@arcor.de>, result: jenny-dennis@arcor.de
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: fsspace: .: block size 4096, blocks free 33100626
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: smtpd_check_queue: blocks 4096 avail 33100626 min_free 0 msg_size_limit 10240000
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: > unknown[151.189.21.55]: 250 2.1.0 Ok
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: watchdog_pat: 0xb80b1348
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: < unknown[151.189.21.55]: RCPT TO:<postmaster@dhm-server.de> ORCPT=rfc822;postmaster@dhm-server.de
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: extract_addr: input: <postmaster@dhm-server.de>
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: smtpd_check_addr: addr=postmaster@dhm-server.de
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: ctable_locate: move existing entry key postmaster@dhm-server.de
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: extract_addr: in: <postmaster@dhm-server.de>, result: postmaster@dhm-server.de
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: >>> START Client host RESTRICTIONS <<<
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: generic_checks: name=permit_mynetworks
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: permit_mynetworks: unknown 151.189.21.55
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: match_hostname: unknown ~? 127.0.0.0/8
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: match_hostaddr: 151.189.21.55 ~? 127.0.0.0/8
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: match_list_match: unknown: no match
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: match_list_match: 151.189.21.55: no match
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: generic_checks: name=permit_mynetworks status=0
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: generic_checks: name=permit_sasl_authenticated
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: generic_checks: name=permit_sasl_authenticated status=0
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: generic_checks: name=reject_unknown_reverse_client_hostname
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: reject_unknown_reverse_name: unknown
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: NOQUEUE: reject: RCPT from unknown[151.189.21.55]: 450 4.7.1 Client host rejected: cannot find your reverse hostname, [151.189.21.55]; from=<jenny-dennis@arcor.de> to=<postmaster@dhm-server.de> proto=ESMTP helo=<mail-in-15.arcor-online.net>
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: generic_checks: name=reject_unknown_reverse_client_hostname status=2
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: > unknown[151.189.21.55]: 450 4.7.1 Client host rejected: cannot find your reverse hostname, [151.189.21.55]
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: watchdog_pat: 0xb80b1348
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: < unknown[151.189.21.55]: DATA
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: > unknown[151.189.21.55]: 554 5.5.1 Error: no valid recipients
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: watchdog_pat: 0xb80b1348
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: < unknown[151.189.21.55]: RSET
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: > unknown[151.189.21.55]: 250 2.0.0 Ok
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: watchdog_pat: 0xb80b1348
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: < unknown[151.189.21.55]: QUIT
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: > unknown[151.189.21.55]: 221 2.0.0 Bye
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: match_hostname: unknown ~? 127.0.0.0/8
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: match_hostaddr: 151.189.21.55 ~? 127.0.0.0/8
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: match_list_match: unknown: no match
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: match_list_match: 151.189.21.55: no match
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: send attr request = disconnect
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: send attr ident = smtp:151.189.21.55
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: private/anvil: wanted attribute: status
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: input attribute name: status
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: input attribute value: 0
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: private/anvil: wanted attribute: (list terminator)
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: input attribute name: (end)
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: disconnect from unknown[151.189.21.55]
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: master_notify: status 1
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: connection closed
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: watchdog_stop: 0xb80b1348
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: watchdog_start: 0xb80b1348




hier nen auszug

Code: Select all

Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: generic_checks: name=reject_unknown_reverse_client_hostname status=2
Sep 17 17:44:20 ks302013 postfix/smtpd[13026]: > unknown[151.189.21.55]: 450 4.7.1 Client host rejected: cannot find your reverse hostname, [151.189.21.55]



Code: Select all

postconf -n
alias_maps = hash:/etc/aliases
append_dot_mydomain = yes
biff = yes
broken_sasl_auth_clients = yes
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/lib/postfix
data_directory = /var/lib/postfix
delay_warning_time = 1h
disable_dns_lookups = no
disable_mime_output_conversion = no
home_mailbox = Maildir/
html_directory = /usr/share/doc/packages/postfix-doc/html
inet_interfaces = all
inet_protocols = all
mail_owner = postfix
mail_spool_directory = /var/mail
mailbox_size_limit = 0
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
masquerade_classes = envelope_sender, header_sender, header_recipient
masquerade_domains =
masquerade_exceptions = root
message_size_limit = 10240000
message_strip_characters = \0
mydestination = localhost
mydomain = ks302013.kimsufi.com
myhostname = ks302013.kimsufi.com
mynetworks = 127.0.0.0/8
myorigin = $mydomain
newaliases_path = /usr/bin/newaliases
queue_directory = /var/spool/postfix
readme_directory = no
recipient_delimiter = +
sample_directory = /usr/share/doc/packages/postfix-doc/samples
sender_canonical_maps = hash:/etc/postfix/sender_canonical
sendmail_path = /usr/sbin/sendmail
setgid_group = maildrop
smtp_sasl_auth_enable = no
smtp_use_tls = yes
smtpd_banner = $myhostname ESMTP
smtpd_client_restrictions = permit_mynetworks,  permit_sasl_authenticated,  reject_unknown_reverse_client_hostname,  permit
smtpd_helo_required = yes
smtpd_helo_restrictions =
smtpd_recipient_limit = 250
smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination
smtpd_sasl_auth_enable = yes
smtpd_sasl_local_domain = $mydomain
smtpd_sasl_path = private/auth
smtpd_sasl_security_options = noanonymous
smtpd_sasl_type = dovecot
smtpd_sender_restrictions = permit_mynetworks, reject_unknown_address, reject_unknown_sender_domain, reject_non_fqdn_sender
strict_8bitmime = no
strict_rfc821_envelopes = no
unknown_local_recipient_reject_code = 550
virtual_alias_maps = hash:/etc/postfix/virtual_domains
virtual_gid_maps = static:5000
virtual_mailbox_base = /var/mail/vhosts
virtual_mailbox_domains = /etc/postfix/virtual_domains
virtual_mailbox_maps = hash:/etc/postfix/vmailbox
virtual_minimum_uid = 100
virtual_transport = dovecot
virtual_uid_maps = static:5000
Top

Roger Wilco
Administrator
Administrator
Posts: 6001
Joined: 2004-05-23 12:53

Re: Postfix + Dovecot Emails werden nicht abgelegt Senden von aussen möglich

Post by Roger Wilco »

Code: Select all

$ host 151.189.21.55
55.21.189.151.in-addr.arpa domain name pointer mail-in-15.arcor-online.net.
$ host mail-in-15.arcor-online.net.
mail-in-15.arcor-online.net has address 151.189.21.55
mail-in-15.arcor-online.net mail is handled by 10 mx.arcor-online.net.

Deine lokale DNS-Auflösung scheint kaputt zu sein. Dann funktionieren DNS-basierte Prüfungen natürlich auch nicht bzw. liefern False Positives.
Top

thestealth
Posts: 8
Joined: 2009-09-17 16:18

Re: Postfix + Dovecot Emails werden nicht abgelegt Senden von aussen möglich

Post by thestealth »

mhhh meine hosts ist noch original

Code: Select all

127.0.0.1       localhost
94.23.58.203   ks302013.kimsufi.com linux-3fq7
# special IPv6 addresses
::1             localhost ipv6-localhost ipv6-loopback

fe00::0         ipv6-localnet

ff00::0         ipv6-mcastprefix
ff02::1         ipv6-allnodes
ff02::2         ipv6-allrouters
ff02::3         ipv6-allhosts


die resolv ist auch okay
Top

Roger Wilco
Administrator
Administrator
Posts: 6001
Joined: 2004-05-23 12:53

Re: Postfix + Dovecot Emails werden nicht abgelegt Senden von aussen möglich

Post by Roger Wilco »

thestealth wrote:mhhh meine hosts ist noch original

Das hat damit nichts zu tun.

thestealth wrote:die resolv ist auch okay

Dein Postfix ist da anderer Meinung. Was sagt denn `host 151.189.21.55`? Ist in der chroot-Umgebung deiner Postfix-Installation eine eigene resolv.conf vorhanden?
Top

thestealth
Posts: 8
Joined: 2009-09-17 16:18

Re: Postfix + Dovecot Emails werden nicht abgelegt Senden von aussen möglich

Post by thestealth »

Code: Select all

ks302013:~ # host 151.189.21.55
55.21.189.151.in-addr.arpa domain name pointer mail-in-15.arcor-online.net.


hat ekine eigene resolf habe in /etc/postfix mal paar dateien durchgeschaut sowie nach resolf gesucht ist nix
Top

thestealth
Posts: 8
Joined: 2009-09-17 16:18

Re: Postfix + Dovecot Emails werden nicht abgelegt Senden von aussen möglich

Post by thestealth »

so hat sich jetzt fast alles erledigt emails kommen an werden aber in /var/mail/<user> abgelegt also kein maildir format

wenn mir da jetzt eienr noch meinen fehler zeigen könnte wäre es klasse mit dem home_mailbox kriege ich es zwar als Maildir hin aber dan liegen sie in /<user>/maildir

bei mir sollte die angabe des ortes eigentlich in der vmailbox liegen

Code: Select all

admin@dhm-server.de               dhm-server.de/info/
webmaster@rc-tube.de              rc-tube.de/info/
postmaster@rc-tube.de             rc-tube.de/info/
test@dhm-server.de                dhm-server.de/test/
postmaster@dhm-server.de          dhm-server.de/postmaster/
root@dhm-server.de                dhm-server.de/root/
webmaster@dhm-server.de           dhm-server.de/webmaster/


Code: Select all

postconf -n
alias_maps = hash:/etc/aliases
append_dot_mydomain = yes
biff = yes
broken_sasl_auth_clients = yes
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/lib/postfix
data_directory = /var/lib/postfix
delay_warning_time = 1h
html_directory = /usr/share/doc/packages/postfix-doc/html
inet_interfaces = $myhostname, localhost
inet_protocols = all
mail_owner = postfix
mail_spool_directory = /var/mail
mailbox_size_limit = 0
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
masquerade_classes = envelope_sender, header_sender, header_recipient
masquerade_domains =
masquerade_exceptions = root
message_size_limit = 10240000
message_strip_characters = \0
mydestination = $myhostname, $mydomain, localhost
mydomain = dhm-server.de
myhostname = mail.dhm-server.de
mynetworks = 127.0.0.0/8
myorigin = $mydomain
newaliases_path = /usr/bin/newaliases
queue_directory = /var/spool/postfix
readme_directory = no
recipient_delimiter = +
sample_directory = /usr/share/doc/packages/postfix-doc/samples
sender_canonical_maps = hash:/etc/postfix/sender_canonical
sendmail_path = /usr/sbin/sendmail
setgid_group = maildrop
smtp_sasl_auth_enable = no
smtp_use_tls = yes
smtpd_banner = $myhostname ESMTP
smtpd_client_restrictions = permit_mynetworks,  permit_sasl_authenticated,  reject_unknown_reverse_client_hostname,  permit
smtpd_helo_required = yes
smtpd_helo_restrictions =
smtpd_recipient_limit = 250
smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination
smtpd_sasl_auth_enable = yes
smtpd_sasl_local_domain = $mydomain
smtpd_sasl_path = private/auth
smtpd_sasl_security_options = noanonymous
smtpd_sasl_type = dovecot
smtpd_sender_restrictions = permit_mynetworks, reject_unknown_address, reject_unknown_sender_domain, reject_non_fqdn_sender
strict_rfc821_envelopes = no
unknown_local_recipient_reject_code = 550
virtual_alias_maps = hash:/etc/postfix/virtual_alias
virtual_gid_maps = static:5000
virtual_mailbox_base = /var/mail/vhosts
virtual_mailbox_domains = /etc/postfix/virtual_domains
virtual_mailbox_maps = hash:/etc/postfix/vmailbox
virtual_minimum_uid = 100
virtual_transport = dovecot
virtual_uid_maps = static:5000
Top