nach langem hin und her habe ich nun auf einen Suse10.0 System Confixx 3.2 installiert bekommen. Soweit geht auch alles.
Mit ausnahme der FTP Benutzer. Diese haben nicht nur Rechte bei sich, sondern auf dem gesamten Server.
Mein vsftpd.conf sieht so aus:
# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are very paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
#
# Allow anonymous FTP?
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
#local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format
#xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that turning on ascii_download_enable enables malicious remote parties
# to consume your I/O resources, by issuing the command "SIZE /big/file" in
# ASCII mode.
# These ASCII options are split into upload and download because you may wish
# to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),
# without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be
# on the client anyway..
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd.chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
# Own Settings
userlist_enable=YES
chroot_local_user=YES
Ich hoffe mir kann jemand helfen... Danke schon mal
Habe aus Dummheit ncftpd installiert nun läuft weder der ncftpd noch vsftpd
ncftpd ist nicht mehr drauf trotzdem geht es nicht.
Folgendes habe ich aber entdeckt in
/etc/xinetd.d/vsftpd
# default: off
# description:
# The vsftpd FTP server serves FTP connections. It uses
# normal, unencrypted usernames and passwords for authentication.
# vsftpd is designed to be secure.
#DISABLED by install_ncftpd.pl# service ftp
#DISABLED by install_ncftpd.pl# {
#DISABLED by install_ncftpd.pl# socket_type = stream
#DISABLED by install_ncftpd.pl# protocol = tcp
#DISABLED by install_ncftpd.pl# wait = no
#DISABLED by install_ncftpd.pl# user = root
#DISABLED by install_ncftpd.pl# server = /usr/sbin/vsftpd
#DISABLED by install_ncftpd.pl# # server_args =
#DISABLED by install_ncftpd.pl# # log_on_success += DURATION USERID
#DISABLED by install_ncftpd.pl# # log_on_failure += USERID
#DISABLED by install_ncftpd.pl# # nice = 10
#DISABLED by install_ncftpd.pl# # disable = yes
#DISABLED by install_ncftpd.pl# }
Was muss ich tun um meinen Ftp-Server wieder zu bekommen ?
DNSpyder wrote:Schau dir die Zeilen mit "#DISABLED by install_ncftpd.pl#" noch mal an und dann stell deine Frage erneut
Das habe ich doch auch gesehen, habe nur vergessen zu erwähnen, dass ich auch das versucht habe das ganze auszukommentieren.
Ich muss aber erlich gestehen, was muss genau auskommentiert werden. Denn alle Versuche schlugen fehl. Kann mir jemand mal das Orginalscript zeigen ?.
Viele Tips, alle ohne ähnlichen System, glaube ich.
Jul 10 23:37:38 p15135968 xinetd[10892]: Exiting...
Jul 10 23:37:38 p15135968 xinetd[12002]: missing service keyword [file=/etc/xinetd.d/vsftpd] [line=2]
in der /var/log/warn
und so sieht das script aus
default: off
# description:
# The vsftpd FTP server serves FTP connections. It uses
# normal, unencrypted usernames and passwords for authentication.
# vsftpd is designed to be secure.
service ftp
{
socket_type = stream
protocol = tcp
wait = no
user = root
server = /usr/sbin/vsftpd
# server_args =
# log_on_success += DURATION USERID
# log_on_failure += USERID
# nice = 10
disable = no
}
dann steht das in der warn
Jul 11 08:10:57 p15135968 xinetd[12002]: Exiting...
und es geht immer noch nicht.
Komme der Sache schon näher, denn es scheint intern auf dem localhost zu laufen, allerdings bekomme ich mit keinem User Zugriff z.b. web1p1 usw. auch root wird local sofort geblockt
Per Browser sieht es so aus "Permision denieded 530" vor jeglicher eingabe
dann steht das in der warn
Jul 11 08:10:57 p15135968 xinetd[12002]: Exiting...
und es geht immer noch nicht.
Komme der Sache schon näher, denn es scheint intern auf dem localhost zu laufen, allerdings bekomme ich mit keinem User Zugriff z.b. web1p1 usw. auch root wird local sofort geblockt
Per Browser sieht es so aus "Permision denieded 530" vor jeglicher eingabe
Echt Merkwürden.
Habe eine Änderung in der /etc/vsftp.conf vorgenommern. Alles sieht gleich aus (Confixxeinträge) nur einen habe ich geändert
von YES
auf userlist_enable=NO
648:648::/srv/www/htdocs/web1:/bin/false
