mails werden nicht zugestellt (postfix)

Postfix, QMail, Sendmail, Dovecot, Cyrus, Courier, Anti-Spam
tobiask
Posts: 164
Joined: 2004-05-02 12:08
Location: NRW

mails werden nicht zugestellt (postfix)

Post by tobiask » 2006-04-27 19:45

Hi,

seit ich an der Postfix Config gespielt hab kommen die Mails nicht mehr an ^^
Mit grep hab ich gesucht nach Mails die ich mir selber geschickt habe, die liegen in z.B.: /var/spool/postfix/hold/9/9BD6DC0282F
in sonem binärfile, gut, ich denke also ma an der config muss was falsch sein da sie ja aufm server landen aber nicht weiter verarbeitet werden.

Kann mir jemand sagen was hier falsach ist?

main.cf

Code: Select all

#
# -----------------------------------------------------------------------
# NOTE: Many parameters have already been added to the end of this file
#       by SuSEconfig.postfix. So take care that you don't uncomment
#       and set a parameter without checking whether it has been added
#       to the end of this file.
# -----------------------------------------------------------------------
#
# Global Postfix configuration file. This file lists only a subset
# of all 300+ parameters. See the sample-xxx.cf files for a full list.
# 
# The general format is lines with parameter = value pairs. Lines
# that begin with whitespace continue the previous line. A value can
# contain references to other $names or ${name}s.
#
# NOTE - CHANGE NO MORE THAN 2-3 PARAMETERS AT A TIME, AND TEST IF
# POSTFIX STILL WORKS AFTER EVERY CHANGE.

# SOFT BOUNCE
#
# The soft_bounce parameter provides a limited safety net for
# testing.  When soft_bounce is enabled, mail will remain queued that
# would otherwise bounce. This parameter disables locally-generated
# bounces, and prevents the SMTP server from rejecting mail permanently
# (by changing 5xx replies into 4xx replies). However, soft_bounce
# is no cure for address rewriting mistakes or mail routing mistakes.
#
#soft_bounce = no

# LOCAL PATHNAME INFORMATION
#
# The queue_directory specifies the location of the Postfix queue.
# This is also the root directory of Postfix daemons that run chrooted.
# See the files in examples/chroot-setup for setting up Postfix chroot
# environments on different UNIX systems.
#
queue_directory = /var/spool/postfix

# The command_directory parameter specifies the location of all
# postXXX commands.
#
command_directory = /usr/sbin

# The daemon_directory parameter specifies the location of all Postfix
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
#
daemon_directory = /usr/lib/postfix

# QUEUE AND PROCESS OWNERSHIP
#
# The mail_owner parameter specifies the owner of the Postfix queue
# and of most Postfix daemon processes.  Specify the name of a user
# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM.  In
# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
# USER.
#
mail_owner = postfix

# The default_privs parameter specifies the default rights used by
# the local delivery agent for delivery to external file or command.
# These rights are used in the absence of a recipient user context.
# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
#
#default_privs = nobody
default_privs = autoresponder

# INTERNET HOST AND DOMAIN NAMES
# 
# The myhostname parameter specifies the internet hostname of this
# mail system. The default is to use the fully-qualified domain name
# from gethostname(). $myhostname is used as a default value for many
# other configuration parameters.
#
#myhostname = host.domain.tld
#myhostname = virtual.domain.tld

# The mydomain parameter specifies the local internet domain name.
# The default is to use $myhostname minus the first component.
# $mydomain is used as a default value for many other configuration
# parameters.
#
#mydomain = domain.tld

# SENDING MAIL
# 
# The myorigin parameter specifies the domain that locally-posted
# mail appears to come from. The default is to append $myhostname,
# which is fine for small sites.  If you run a domain with multiple
# machines, you should (1) change this to $mydomain and (2) set up
# a domain-wide alias database that aliases each user to
# user@that.users.mailhost.
#
# For the sake of consistency between sender and recipient addresses,
# myorigin also specifies the default domain name that is appended
# to recipient addresses that have no @domain part.
#
#myorigin = $myhostname
#myorigin = $mydomain

# RECEIVING MAIL

# The inet_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on.  By default,
# the software claims all active interfaces on the machine. The
# parameter also controls delivery of mail to user@[ip.address].
#
# See also the proxy_interfaces parameter, for network addresses that
# are forwarded to us via a proxy or network address translator.
#
# Note: you need to stop/start Postfix when this parameter changes.
#
#inet_interfaces = all
#inet_interfaces = $myhostname
#inet_interfaces = $myhostname, localhost
inet_interfaces = all

# The proxy_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on by way of a
# proxy or network address translation unit. This setting extends
# the address list specified with the inet_interfaces parameter.
#
# You must specify your proxy/NAT addresses when your system is a
# backup MX host for other domains, otherwise mail delivery loops
# will happen when the primary MX host is down.
#
#proxy_interfaces =
#proxy_interfaces = 1.2.3.4

# The mydestination parameter specifies the list of domains that this
# machine considers itself the final destination for.
#
# These domains are routed to the delivery agent specified with the
# local_transport parameter setting. By default, that is the UNIX
# compatible delivery agent that lookups all recipients in /etc/passwd
# and /etc/aliases or their equivalent.
#
# The default is $myhostname + localhost.$mydomain.  On a mail domain
# gateway, you should also include $mydomain.
#
# Do not specify the names of virtual domains - those domains are
# specified elsewhere (see sample-virtual.cf).
#
# Do not specify the names of domains that this machine is backup MX
# host for. Specify those names via the relay_domains settings for
# the SMTP server, or use permit_mx_backup if you are lazy (see
# sample-smtpd.cf).
#
# The local machine is always the final destination for mail addressed
# to user@[the.net.work.address] of an interface that the mail system
# receives mail on (see the inet_interfaces parameter).
#
# Specify a list of host or domain names, /file/name or type:table
# patterns, separated by commas and/or whitespace. A /file/name
# pattern is replaced by its contents; a type:table is matched when
# a name matches a lookup key (the right-hand side is ignored).
# Continue long lines by starting the next line with whitespace.
#
# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
#
#mydestination = $myhostname, localhost.$mydomain
#mydestination = $myhostname, localhost.$mydomain $mydomain
#mydestination = $myhostname, localhost.$mydomain, $mydomain,
#mail.$mydomain, www.$mydomain, ftp.$mydomain

# REJECTING MAIL FOR UNKNOWN LOCAL USERS
#
# The local_recipient_maps parameter specifies optional lookup tables
# with all names or addresses of users that are local with respect
# to $mydestination and $inet_interfaces.
#
# If this parameter is defined, then the SMTP server will reject
# mail for unknown local users. This parameter is defined by default.
#
# To turn off local recipient checking in the SMTP server, specify
# local_recipient_maps = (i.e. empty).
#
# The default setting assumes that you use the default Postfix local
# delivery agent for local delivery. You need to update the
# local_recipient_maps setting if:
#
# - You define $mydestination domain recipients in files other than
#   /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
#   For example, you define $mydestination domain recipients in    
#   the $virtual_mailbox_maps files.
#
# - You redefine the local delivery agent in master.cf.
#
# - You redefine the "local_transport" setting in main.cf.
#
# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
#   feature of the Postfix local delivery agent (see sample-local.cf).
#
# Details are described in the LOCAL_RECIPIENT_README file.
#
# Beware: if the Postfix SMTP server runs chrooted, you probably have
# to access the passwd file via the proxymap service, in order to
# overcome chroot restrictions. The alternative, having a copy of
# the system passwd file in the chroot jail is just not practical.
#
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify a bare username, an @domain.tld
# wild-card, or specify a user@domain.tld address.
# 
#local_recipient_maps = unix:passwd.byname $alias_maps
#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
#local_recipient_maps =

# The unknown_local_recipient_reject_code specifies the SMTP server
# response code when a recipient domain matches $mydestination or
# $inet_interfaces, while $local_recipient_maps is non-empty and the
# recipient address or address local-part is not found.
#
# The default setting is 550 (reject mail) but it is safer to start
# with 450 (try again later) until you are certain that your
# local_recipient_maps settings are OK.
#
unknown_local_recipient_reject_code = 550
#unknown_local_recipient_reject_code = 450

# TRUST AND RELAY CONTROL

# The mynetworks parameter specifies the list of "trusted" SMTP
# clients that have more privileges than "strangers".
#
# In particular, "trusted" SMTP clients are allowed to relay mail
# through Postfix.  See the smtpd_recipient_restrictions parameter
# in file sample-smtpd.cf.
#
# You can specify the list of "trusted" network addresses by hand
# or you can let Postfix do it for you (which is the default).
#
# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
# clients in the same IP subnetworks as the local machine.
# On Linux, this does works correctly only with interfaces specified
# with the "ifconfig" command.
# 
# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
# clients in the same IP class A/B/C networks as the local machine.
# Don't do this with a dialup site - it would cause Postfix to "trust"
# your entire provider's network.  Instead, specify an explicit
# mynetworks list by hand, as described below.
#  
# Specify "mynetworks_style = host" when Postfix should "trust"
# only the local machine.
# 
#mynetworks_style = class
#mynetworks_style = subnet
#mynetworks_style = host

# Alternatively, you can specify the mynetworks list by hand, in
# which case Postfix ignores the mynetworks_style setting.
#
# Specify an explicit list of network/netmask patterns, where the
# mask specifies the number of bits in the network part of a host
# address.
#
# You can also specify the absolute pathname of a pattern file instead
# of listing the patterns here. Specify type:table for table-based lookups
# (the value on the table right-hand side is not used).
#
#mynetworks = 168.100.189.0/28, 127.0.0.0/8
#mynetworks = $config_directory/mynetworks
#mynetworks = hash:/etc/postfix/network_table

# The relay_domains parameter restricts what destinations this system will
# relay mail to.  See the smtpd_recipient_restrictions restriction in the
# file sample-smtpd.cf for detailed information.
#
# By default, Postfix relays mail
# - from "trusted" clients (IP address matches $mynetworks) to any destination,
# - from "untrusted" clients to destinations that match $relay_domains or
#   subdomains thereof, except addresses with sender-specified routing.
# The default relay_domains value is $mydestination.
# 
# In addition to the above, the Postfix SMTP server by default accepts mail
# that Postfix is final destination for:
# - destinations that match $inet_interfaces,
# - destinations that match $mydestination
# - destinations that match $virtual_alias_domains,
# - destinations that match $virtual_mailbox_domains.
# These destinations do not need to be listed in $relay_domains.
# 
# Specify a list of hosts or domains, /file/name patterns or type:name
# lookup tables, separated by commas and/or whitespace.  Continue
# long lines by starting the next line with whitespace. A file name
# is replaced by its contents; a type:name table is matched when a
# (parent) domain appears as lookup key.
#
# NOTE: Postfix will not automatically forward mail for domains that
# list this system as their primary or backup MX host. See the
# permit_mx_backup restriction in the file sample-smtpd.cf.
#
#relay_domains = $mydestination

# INTERNET OR INTRANET

# The relayhost parameter specifies the default host to send mail to
# when no entry is matched in the optional transport(5) table. When
# no relayhost is given, mail is routed directly to the destination.
#
# On an intranet, specify the organizational domain name. If your
# internal DNS uses no MX records, specify the name of the intranet
# gateway host instead.
#
# In the case of SMTP, specify a domain, host, host:port, [host]:port,
# [address] or [address]:port; the form [host] turns off MX lookups.
#
# If you're connected via UUCP, see also the default_transport parameter.
#
#relayhost = $mydomain
#relayhost = gateway.my.domain
#relayhost = uucphost
#relayhost = [an.ip.add.ress]

# REJECTING UNKNOWN RELAY USERS
#
# The relay_recipient_maps parameter specifies optional lookup tables
# with all addresses in the domains that match $relay_domains.
#
# If this parameter is defined, then the SMTP server will reject
# mail for unknown relay users. This feature is off by default.
#
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify an @domain.tld wild-card, or specify
# a user@domain.tld address.
# 
#relay_recipient_maps = hash:/etc/postfix/relay_recipients

# INPUT RATE CONTROL
#
# The in_flow_delay configuration parameter implements mail input
# flow control. This feature is turned on by default, although it
# still needs further development (it's disabled on SCO UNIX due
# to an SCO bug).
# 
# A Postfix process will pause for $in_flow_delay seconds before
# accepting a new message, when the message arrival rate exceeds the
# message delivery rate. With the default 100 SMTP server process
# limit, this limits the mail inflow to 100 messages a second more
# than the number of messages delivered per second.
# 
# Specify 0 to disable the feature. Valid delays are 0..10.
# 
#in_flow_delay = 1s

# ADDRESS REWRITING
#
# Insert text from sample-rewrite.cf if you need to do address
# masquerading.
#
# Insert text from sample-canonical.cf if you need to do address
# rewriting, or if you need username->Firstname.Lastname mapping.

# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
#
# Insert text from sample-virtual.cf if you need virtual domain support.

# "USER HAS MOVED" BOUNCE MESSAGES
#
# Insert text from sample-relocated.cf if you need "user has moved"
# style bounce messages. Alternatively, you can bounce recipients
# with an SMTP server access table. See sample-smtpd.cf.

# TRANSPORT MAP
#
# Insert text from sample-transport.cf if you need explicit routing.

# ALIAS DATABASE
#
# The alias_maps parameter specifies the list of alias databases used
# by the local delivery agent. The default list is system dependent.
#
# On systems with NIS, the default is to search the local alias
# database, then the NIS alias database. See aliases(5) for syntax
# details.
# 
# If you change the alias database, run "postalias /etc/aliases" (or
# wherever your system stores the mail alias file), or simply run
# "newaliases" to build the necessary DBM or DB file.
#
# It will take a minute or so before changes become visible.  Use
# "postfix reload" to eliminate the delay.
#
#alias_maps = dbm:/etc/aliases
#alias_maps = hash:/etc/aliases
#alias_maps = hash:/etc/aliases, nis:mail.aliases
#alias_maps = netinfo:/aliases

# The alias_database parameter specifies the alias database(s) that
# are built with "newaliases" or "sendmail -bi".  This is a separate
# configuration parameter, because alias_maps (see above) may specify
# tables that are not necessarily all under control by Postfix.
#
#alias_database = dbm:/etc/aliases
#alias_database = dbm:/etc/mail/aliases
#alias_database = hash:/etc/aliases
#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases

# ADDRESS EXTENSIONS (e.g., user+foo)
#
# The recipient_delimiter parameter specifies the separator between
# user names and address extensions (user+foo). See canonical(5),
# local(8), relocated(5) and virtual(5) for the effects this has on
# aliases, canonical, virtual, relocated and .forward file lookups.
# Basically, the software tries user+foo and .forward+foo before
# trying user and .forward.
#
#recipient_delimiter = +

# DELIVERY TO MAILBOX
#
# The home_mailbox parameter specifies the optional pathname of a
# mailbox file relative to a user's home directory. The default
# mailbox file is /var/spool/mail/user or /var/mail/user.  Specify
# "Maildir/" for qmail-style delivery (the / is required).
#
#home_mailbox = Mailbox
#home_mailbox = Maildir/
 
# The mail_spool_directory parameter specifies the directory where
# UNIX-style mailboxes are kept. The default setting depends on the
# system type.
#
#mail_spool_directory = /var/mail
#mail_spool_directory = /var/spool/mail

# The mailbox_command parameter specifies the optional external
# command to use instead of mailbox delivery. The command is run as
# the recipient with proper HOME, SHELL and LOGNAME environment settings.
# Exception:  delivery for root is done as $default_user.
#
# Other environment variables of interest: USER (recipient username),
# EXTENSION (address extension), DOMAIN (domain part of address),
# and LOCAL (the address localpart).
#
# Unlike other Postfix configuration parameters, the mailbox_command
# parameter is not subjected to $parameter substitutions. This is to
# make it easier to specify shell syntax (see example below).
#
# Avoid shell meta characters because they will force Postfix to run
# an expensive shell process. Procmail alone is expensive enough.
#
# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
#
#mailbox_command = /some/where/procmail
#mailbox_command = /some/where/procmail -a "$EXTENSION"

# The mailbox_transport specifies the optional transport in master.cf
# to use after processing aliases and .forward files. This parameter
# has precedence over the mailbox_command, fallback_transport and
# luser_relay parameters.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf.  The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for    
# non-UNIX accounts with "User unknown in local recipient table".
#
#mailbox_transport = lmtp:unix:/file/name
#mailbox_transport = cyrus

# The fallback_transport specifies the optional transport in master.cf
# to use for recipients that are not found in the UNIX passwd database.
# This parameter has precedence over the luser_relay parameter.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf.  The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for    
# non-UNIX accounts with "User unknown in local recipient table".
#
#fallback_transport = lmtp:unix:/file/name
#fallback_transport = cyrus
#fallback_transport =

# The luser_relay parameter specifies an optional destination address
# for unknown recipients.  By default, mail for unknown@$mydestination
# and unknown@[$inet_interfaces] is returned as undeliverable.
#
# The following expansions are done on luser_relay: $user (recipient
# username), $shell (recipient shell), $home (recipient home directory),
# $recipient (full recipient address), $extension (recipient address
# extension), $domain (recipient domain), $local (entire recipient
# localpart), $recipient_delimiter. Specify ${name?value} or
# ${name:value} to expand value only when $name does (does not) exist.
#
# luser_relay works only for the default Postfix local delivery agent.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must specify "local_recipient_maps =" (i.e. empty) in
# the main.cf file, otherwise the SMTP server will reject mail for    
# non-UNIX accounts with "User unknown in local recipient table".
#
#luser_relay = $user@other.host
#luser_relay = $local@other.host
#luser_relay = admin+$local
  
# JUNK MAIL CONTROLS
# 
# The controls listed here are only a very small subset. See the file
# sample-smtpd.cf for an elaborate list of anti-UCE controls.

# The header_checks parameter specifies an optional table with patterns
# that each logical message header is matched against, including
# headers that span multiple physical lines.
#
# By default, these patterns also apply to MIME headers and to the
# headers of attached messages. With older Postfix versions, MIME and
# attached message headers were treated as body text.
#
# For details, see the sample-filter.cf file.
#
header_checks = regexp:/etc/postfix/header_checks
body_checks = pcre:/etc/postfix/body_pcre

# FAST ETRN SERVICE
#
# Postfix maintains per-destination logfiles with information about
# deferred mail, so that mail can be flushed quickly with the SMTP
# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
# 
# By default, Postfix maintains deferred mail logfile information
# only for destinations that Postfix is willing to relay to (as
# specified in the relay_domains parameter). For other destinations,
# Postfix attempts to deliver ALL queued mail after receiving the
# SMTP "ETRN domain.tld" command, or after execution of "sendmail
# -qRdomain.tld". This can be slow when a lot of mail is queued.
# 
# The fast_flush_domains parameter controls what destinations are
# eligible for this "fast ETRN/sendmail -qR" service.
# 
#fast_flush_domains = $relay_domains
#fast_flush_domains =

# SHOW SOFTWARE VERSION OR NOT
#
# The smtpd_banner parameter specifies the text that follows the 220
# code in the SMTP server's greeting banner. Some people like to see
# the mail version advertised. By default, Postfix shows no version.
#
# You MUST specify $myhostname at the start of the text. That is an
# RFC requirement. Postfix itself does not care.
#
#smtpd_banner = $myhostname ESMTP $mail_name
#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)

# PARALLEL DELIVERY TO THE SAME DESTINATION
#
# How many parallel deliveries to the same user or domain? With local
# delivery, it does not make sense to do massively parallel delivery
# to the same user, because mailbox updates must happen sequentially,
# and expensive pipelines in .forward files can cause disasters when
# too many are run at the same time. With SMTP deliveries, 10
# simultaneous connections to the same domain could be sufficient to
# raise eyebrows.
# 
# Each message delivery transport has its XXX_destination_concurrency_limit
# parameter.  The default is $default_destination_concurrency_limit for
# most delivery transports. For the local delivery agent the default is 2.

#local_destination_concurrency_limit = 2
#default_destination_concurrency_limit = 20

# DEBUGGING CONTROL
#
# The debug_peer_level parameter specifies the increment in verbose
# logging level when an SMTP client or server host name or address
# matches a pattern in the debug_peer_list parameter.
#
debug_peer_level = 2

# The debug_peer_list parameter specifies an optional list of domain
# or network patterns, /file/name patterns or type:name tables. When
# an SMTP client or server host name or address matches a pattern,
# increase the verbose logging level by the amount specified in the
# debug_peer_level parameter.
#
#debug_peer_list = 127.0.0.1
#debug_peer_list = some.domain

# The debugger_command specifies the external command that is executed
# when a Postfix daemon program is run with the -D option.
#
# Use "command .. & sleep 5" so that the debugger can attach before
# the process marches on. If you use an X-based debugger, be sure to
# set up your XAUTHORITY environment variable before starting Postfix.
#
debugger_command =
 PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
 xxgdb $daemon_directory/$process_name $process_id & sleep 5

# If you don't have X installed on the Postfix machine, try:
# debugger_command =
#PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
#echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
#>$config_directory/$process_name.$process_id.log & sleep 5

# INSTALL-TIME CONFIGURATION INFORMATION
#
# The following parameters are used when installing a new Postfix version.
# 
# sendmail_path: The full pathname of the Postfix sendmail command.
# This is the Sendmail-compatible mail posting interface.
# 
sendmail_path = /usr/sbin/sendmail

# newaliases_path: The full pathname of the Postfix newaliases command.
# This is the Sendmail-compatible command to build alias databases.
#
newaliases_path = /usr/bin/newaliases

# mailq_path: The full pathname of the Postfix mailq command.  This
# is the Sendmail-compatible mail queue listing command.
# 
mailq_path = /usr/bin/mailq

# setgid_group: The group for mail submission and queue management
# commands.  This must be a group name with a numerical group ID that
# is not shared with other accounts, not even with the Postfix account.
#
setgid_group = maildrop

# manpage_directory: The location of the Postfix on-line manual pages.
#
manpage_directory = /usr/share/man

# sample_directory: The location of the Postfix sample configuration files.
#
sample_directory = /usr/share/doc/packages/postfix/samples

# readme_directory: The location of the Postfix README files.
#
readme_directory = /usr/share/doc/packages/postfix/README_FILES
mail_spool_directory = /var/mail
canonical_maps = hash:/etc/postfix/canonical
virtual_maps = hash:/etc/postfix/virtual, hash:/etc/postfix/confixx_virtualUsers, hash:/etc/postfix/confixx_localDomains
relocated_maps = hash:/etc/postfix/relocated
transport_maps = hash:/etc/postfix/transport
sender_canonical_maps = hash:/etc/postfix/sender_canonical
masquerade_exceptions = root
masquerade_classes = envelope_sender, header_sender, header_recipient
myhostname = p15156934.pureserver.info
program_directory = /usr/lib/postfix
masquerade_domains = 
mydestination = $myhostname, localhost.$mydomain
defer_transports = 
disable_dns_lookups = no
relayhost = 
content_filter =

mailbox_transport = 
smtpd_sender_restrictions = hash:/etc/postfix/access
smtpd_client_restrictions =
disable_vrfy_command = yes 
smtpd_helo_required = no
smtpd_helo_restrictions = 
strict_rfc821_envelopes = no
smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination,reject_invalid_sender,reject_non_fqdn_sender,reject_unknown_sender_domain
smtp_use_tls = no
alias_maps = hash:/etc/aliases
mailbox_size_limit = 0
message_size_limit = 10240000

#SMTPD Auth
smtpd_sasl_auth_enable = yes
smtpd_sasl_security_options = noanonymous
broken_sasl_auth_clients = yes

#TLS Support
smtpd_use_tls = yes
#smtpd_tls_auth_only = yes
smtpd_tls_key_file = /etc/postfix/key.pem
smtpd_tls_cert_file = /etc/postfix/cert.pem
smtpd_tls_CAfile = /etc/ssl/certs/p15156934.pureserver.info-sample-ca.crt
smtpd_tls_loglevel = 1
smtpd_tls_received_header = yes
smtpd_tls_session_cache_timeout = 3600s
tls_random_source = dev:/dev/urandom
master.cf

Code: Select all

#
# Postfix master process configuration file.  Each logical line
# describes how a Postfix daemon program should be run.
#
# A logical line starts with non-whitespace, non-comment text. 
# Empty lines and whitespace-only lines are ignored, as are comment
# lines whose first non-whitespace character is a `#'.
# A line that starts with whitespace continues a logical line.
#
# The fields that make up each line are described below. A "-" field
# value requests that a default value be used for that field.
#
# Service: any name that is valid for the specified transport type
# (the next field).  With INET transports, a service is specified as
# host:port.  The host part (and colon) may be omitted. Either host
# or port may be given in symbolic form or in numeric form. Examples
# for the SMTP server:  localhost:smtp receives mail via the loopback
# interface only; 10025 receives mail on port 10025.
#
# Transport type: "inet" for Internet sockets, "unix" for UNIX-domain
# sockets, "fifo" for named pipes.
#
# Private: whether or not access is restricted to the mail system.
# Default is private service.  Internet (inet) sockets can't be private.
#
# Unprivileged: whether the service runs with root privileges or as
# the owner of the Postfix system (the owner name is controlled by the
# mail_owner configuration variable in the main.cf file). Only the
# pipe, virtual and local delivery daemons require privileges.
#
# Chroot: whether or not the service runs chrooted to the mail queue
# directory (pathname is controlled by the queue_directory configuration
# variable in the main.cf file). Presently, all Postfix daemons can run
# chrooted, except for the pipe, virtual and local delivery daemons.
# The proxymap server can run chrooted, but doing so defeats most of
# the purpose of having that service in the first place.
# The files in the examples/chroot-setup subdirectory describe how
# to set up a Postfix chroot environment for your type of machine.
#
# Wakeup time: automatically wake up the named service after the
# specified number of seconds. A ? at the end of the wakeup time
# field requests that wake up events be sent only to services that
# are actually being used.  Specify 0 for no wakeup. Presently, only
# the pickup, queue manager and flush daemons need a wakeup timer.
#
# Max procs: the maximum number of processes that may execute this
# service simultaneously. Default is to use a globally configurable
# limit (the default_process_limit configuration parameter in main.cf).
# Specify 0 for no process count limit.
#
# Command + args: the command to be executed. The command name is
# relative to the Postfix program directory (pathname is controlled by
# the daemon_directory configuration variable). Adding one or more
# -v options turns on verbose logging for that service; adding a -D
# option enables symbolic debugging (see the debugger_command variable
# in the main.cf configuration file). See individual command man pages
# for specific command-line options, if any.
#
# In order to use the "uucp" message tranport below, set up entries
# in the transport table.
#
# In order to use the "cyrus" message transport below, configure it
# in main.cf as the mailbox_transport.
#
# SPECIFY ONLY PROGRAMS THAT ARE WRITTEN TO RUN AS POSTFIX DAEMONS.
# ALL DAEMONS SPECIFIED HERE MUST SPEAK A POSTFIX-INTERNAL PROTOCOL.
#
# DO NOT SHARE THE POSTFIX QUEUE BETWEEN MULTIPLE POSTFIX INSTANCES.
#
# ==========================================================================
# service type  private unpriv  chroot  wakeup  maxproc command + args
#               (yes)   (yes)   (yes)   (never) (100)
# ==========================================================================
smtp  inetn-n--smtpd
smtps  inetn-n--smtpd
  -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes
#submissioninetn-n--smtpd
#  -o smtpd_enforce_tls=yes -o smtpd_sasl_auth_enable=yes
#628  inetn-n--qmqpd
pickup  fifon-n601pickup
cleanup  unixn-n-0cleanup
qmgr  fifon-n3001qmgr
#qmgr  fifon-n3001nqmgr
#tlsmgr   fifo  -       -       n       300     1       tlsmgr
rewrite  unix--n--trivial-rewrite
bounce  unix--n-0bounce
defer  unix--n-0bounce
flush  unixn-n1000?0flush
proxymap  unix--n--proxymap
smtp  unix--n--smtp
#relay  unix--n--smtp
#-o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq     unixn-n--showq
error     unix--n--error
local  unix-nn--local
virtual  unix-nn--virtual
lmtp  unix--n--lmtp
localhost:10026 inetn-y--smtpd -o content_filter=
#
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# maildrop. See the Postfix MAILDROP_README file for details.
#
#maildrop  unix  -       n       n       -       -       pipe
#  flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient}
cyrus  unix-nn--pipe
  user=cyrus argv=/usr/lib/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
uucp  unix-nn--pipe
  flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
ifmail    unix  -       n       n       -       -       pipe
  flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp     unix  -       n       n       -       -       pipe
  flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient
vscan     unix  -       n       n       -       10       pipe
  user=vscan argv=/usr/sbin/amavis ${sender} ${recipient}
procmail  unix  -       n       n       -       -       pipe
  flags=R user=nobody argv=/usr/bin/procmail -t -m /etc/procmailrc ${sender} ${recipient}
als zusatzinfo, ich nutze confixx zum user anlegen etc.
hab daher auch schonma mit

Code: Select all

postmap confixx_virtualUsers 
versucht das hinzubiegen, falls das file defekt sein sollte, funzt aber immer noch nicht ...

hoffe ihr habt ne idee wo der fehler stecken könnte!

mfg tobias

duergner
RSAC
Posts: 976
Joined: 2003-08-20 11:30
Location: Pittsburgh, PA, USA

Re: mails werden nicht zugestellt (postfix)

Post by duergner » 2006-04-27 19:54

Zuerst mal: Kommentare in Config Files sind nicht sinnvoll hier.

Für die Postfix Config bitte die Ausgabe von

Code: Select all

postconf -n
posten und vor allem auch Logfileauszüge.

tobiask
Posts: 164
Joined: 2004-05-02 12:08
Location: NRW

Re: mails werden nicht zugestellt (postfix)

Post by tobiask » 2006-04-27 20:03

oke

Code: Select all

p15156934:~ # postconf -n
alias_maps = hash:/etc/aliases
body_checks = pcre:/etc/postfix/body_pcre
broken_sasl_auth_clients = yes
canonical_maps = hash:/etc/postfix/canonical
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter =
daemon_directory = /usr/lib/postfix
debug_peer_level = 2
default_privs = autoresponder
defer_transports =
disable_dns_lookups = no
disable_vrfy_command = yes
header_checks = regexp:/etc/postfix/header_checks
inet_interfaces = all
mail_owner = postfix
mail_spool_directory = /var/mail
mailbox_size_limit = 0
mailbox_transport =
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
masquerade_classes = envelope_sender, header_sender, header_recipient
masquerade_domains =
masquerade_exceptions = root
message_size_limit = 10240000
mydestination = $myhostname, localhost.$mydomain
myhostname = p15156934.pureserver.info
newaliases_path = /usr/bin/newaliases
program_directory = /usr/lib/postfix
queue_directory = /var/spool/postfix
readme_directory = /usr/share/doc/packages/postfix/README_FILES
relayhost =
relocated_maps = hash:/etc/postfix/relocated
sample_directory = /usr/share/doc/packages/postfix/samples
sender_canonical_maps = hash:/etc/postfix/sender_canonical
sendmail_path = /usr/sbin/sendmail
setgid_group = maildrop
smtp_use_tls = no
smtpd_client_restrictions =
smtpd_helo_required = no
smtpd_helo_restrictions =
smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination,reject_invalid_sender,reject_non_fqdn_sender,reject_unknown_sender_domain
smtpd_sasl_auth_enable = yes
smtpd_sasl_security_options = noanonymous
smtpd_sender_restrictions = hash:/etc/postfix/access
smtpd_tls_CAfile = /etc/ssl/certs/p15156934.pureserver.info-sample-ca.crt
smtpd_tls_cert_file = /etc/postfix/cert.pem
smtpd_tls_key_file = /etc/postfix/key.pem
smtpd_tls_loglevel = 1
smtpd_tls_received_header = yes
smtpd_tls_session_cache_timeout = 3600s
smtpd_use_tls = yes
strict_rfc821_envelopes = no
tls_random_source = dev:/dev/urandom
transport_maps = hash:/etc/postfix/transport
unknown_local_recipient_reject_code = 550
logfiles:

Code: Select all

p15156934:/var/log # tail -20 mail
Apr 27 20:00:47 p15156934 postfix/smtpd[3064]: connect from mout-bounce.kundenserver.de[212.227.15.20]
Apr 27 20:00:47 p15156934 postfix/smtpd[3064]: 77A29C0325C: client=mout-bounce.kundenserver.de[212.227.15.20]
Apr 27 20:00:47 p15156934 postfix/smtpd[3064]: warning: unknown smtpd restriction: "reject_invalid_sender"
Apr 27 20:00:47 p15156934 postfix/smtpd[3064]: 77A29C0325C: reject: RCPT from mout-bounce.kundenserver.de[212.227.15.20]: 451 Server configuration error; from=<> to=<scmqed@mynickpage.de> proto=ESMTP helo=<mout-bounce.kundenserver.de>
Apr 27 20:00:49 p15156934 postfix/cleanup[3690]: 7C773C0325E: message-id=<20060427180049.7C773C0325E@p15156934.pureserver.info>
Apr 27 20:00:49 p15156934 postfix/qmgr[25041]: 7C773C0325E: from=<double-bounce@p15156934.pureserver.info>, size=943, nrcpt=1 (queue active)
Apr 27 20:00:49 p15156934 postfix/smtpd[3064]: disconnect from mout-bounce.kundenserver.de[212.227.15.20]
Apr 27 20:00:49 p15156934 postfix/local[3691]: 7C773C0325E: to=<web0p1@p15156934.pureserver.info>, orig_to=<postmaster>, relay=local, delay=0, status=bounced (unknown user: "web0p1")
Apr 27 20:00:49 p15156934 postfix/bounce[3693]: warning: 7C773C0325E: undeliverable postmaster notification discarded
Apr 27 20:00:53 p15156934 popper[3789]: Stats: web1p2 0 0 0 0 Vdeb2.v.pppool.de 89.57.222.178 [pop_updt.c:296]
Apr 27 20:01:57 p15156934 popper[3924]: Stats: web1p2 0 0 0 0 Vdeb2.v.pppool.de 89.57.222.178 [pop_updt.c:296]
Apr 27 20:02:15 p15156934 postfix/smtpd[3064]: connect from moutng.kundenserver.de[212.227.126.183]
Apr 27 20:02:15 p15156934 postfix/smtpd[3064]: B8E72C0325C: client=moutng.kundenserver.de[212.227.126.183]
Apr 27 20:02:15 p15156934 postfix/smtpd[3064]: warning: unknown smtpd restriction: "reject_invalid_sender"
Apr 27 20:02:15 p15156934 postfix/smtpd[3064]: B8E72C0325C: reject: RCPT from moutng.kundenserver.de[212.227.126.183]: 451 Server configuration error; from=<webmaster@webmaster-eye.de> to=<support@mynickpage.de> proto=ESMTP helo=<moutng.kundenserver.de>
Apr 27 20:02:17 p15156934 postfix/cleanup[3040]: BDE06C0325E: message-id=<20060427180217.BDE06C0325E@p15156934.pureserver.info>
Apr 27 20:02:17 p15156934 postfix/qmgr[25041]: BDE06C0325E: from=<double-bounce@p15156934.pureserver.info>, size=961, nrcpt=1 (queue active)
Apr 27 20:02:17 p15156934 postfix/smtpd[3064]: disconnect from moutng.kundenserver.de[212.227.126.183]
Apr 27 20:02:17 p15156934 postfix/local[3691]: BDE06C0325E: to=<web0p1@p15156934.pureserver.info>, orig_to=<postmaster>, relay=local, delay=0, status=bounced (unknown user: "web0p1")
Apr 27 20:02:17 p15156934 postfix/bounce[3692]: warning: BDE06C0325E: undeliverable postmaster notification discarded

Code: Select all

p15156934:/var/log # tail -20 mail.warn
Apr 27 19:53:33 p15156934 postfix/bounce[3047]: warning: 369B4C0325C: undeliverable postmaster notification discarded
Apr 27 19:54:07 p15156934 postfix/smtpd[3064]: warning: unknown smtpd restriction: "reject_invalid_sender"
Apr 27 19:54:09 p15156934 postfix/bounce[3044]: warning: 99A3AC0325C: undeliverable postmaster notification discarded
Apr 27 19:54:25 p15156934 postfix/smtpd[3064]: warning: unknown smtpd restriction: "reject_invalid_sender"
Apr 27 19:54:27 p15156934 postfix/bounce[3047]: warning: 0E41DC0325C: undeliverable postmaster notification discarded
Apr 27 19:55:20 p15156934 postfix/smtpd[3064]: warning: unknown smtpd restriction: "reject_invalid_sender"
Apr 27 19:55:22 p15156934 postfix/bounce[3044]: warning: C51ADC0325C: undeliverable postmaster notification discarded
Apr 27 19:56:58 p15156934 postfix/smtpd[3064]: warning: unknown smtpd restriction: "reject_invalid_sender"
Apr 27 19:57:00 p15156934 postfix/bounce[3047]: warning: 0602DC0325C: undeliverable postmaster notification discarded
Apr 27 19:57:13 p15156934 postfix/smtpd[3064]: warning: unknown smtpd restriction: "reject_invalid_sender"
Apr 27 19:57:15 p15156934 postfix/bounce[3044]: warning: 25B1CC0325C: undeliverable postmaster notification discarded
Apr 27 19:57:42 p15156934 postfix/bounce[3047]: warning: B9098C02679: undeliverable postmaster notification discarded
Apr 27 19:59:50 p15156934 postfix/smtpd[3064]: warning: unknown smtpd restriction: "reject_invalid_sender"
Apr 27 19:59:52 p15156934 postfix/bounce[3692]: warning: 6DFE2C0325C: undeliverable postmaster notification discarded
Apr 27 20:00:47 p15156934 postfix/smtpd[3064]: warning: unknown smtpd restriction: "reject_invalid_sender"
Apr 27 20:00:49 p15156934 postfix/bounce[3693]: warning: 7C773C0325E: undeliverable postmaster notification discarded
Apr 27 20:02:15 p15156934 postfix/smtpd[3064]: warning: unknown smtpd restriction: "reject_invalid_sender"
Apr 27 20:02:17 p15156934 postfix/bounce[3692]: warning: BDE06C0325E: undeliverable postmaster notification discarded
Apr 27 20:02:52 p15156934 postfix/smtpd[3064]: warning: unknown smtpd restriction: "reject_invalid_sender"
Apr 27 20:02:54 p15156934 postfix/bounce[3693]: warning: 63D21C0325E: undeliverable postmaster notification discarded
sind die aktuellen, falls mehr erwünscht sagen ;)

duergner
RSAC
Posts: 976
Joined: 2003-08-20 11:30
Location: Pittsburgh, PA, USA

Re: mails werden nicht zugestellt (postfix)

Post by duergner » 2006-04-27 20:40

Die Usertabellen von Confix sind nicht eingebunden wenn ich das richtig sehe. Außer die stehen in der /etc/aliases drinnen.

tobiask
Posts: 164
Joined: 2004-05-02 12:08
Location: NRW

Re: mails werden nicht zugestellt (postfix)

Post by tobiask » 2006-04-27 22:31

duergner wrote:Die Usertabellen von Confix sind nicht eingebunden wenn ich das richtig sehe. Außer die stehen in der /etc/aliases drinnen.
hm, und wie bekomm ich die wieder rein?
hab ma so aus ner idee raus das gemacht:

Code: Select all

alias_maps = hash:/etc/postfix/confixx_virtualUsers
anstatt der /etc/aliases
funzt so aber auch noch nicht ...
noch jemand ne idee wo der fehler liegt?

tobiask
Posts: 164
Joined: 2004-05-02 12:08
Location: NRW

Re: mails werden nicht zugestellt (postfix)

Post by tobiask » 2006-05-01 16:13

duergner wrote:Die Usertabellen von Confix sind nicht eingebunden wenn ich das richtig sehe. Außer die stehen in der /etc/aliases drinnen.
wie kann ich das problem lösen?

duergner
RSAC
Posts: 976
Joined: 2003-08-20 11:30
Location: Pittsburgh, PA, USA

Re: mails werden nicht zugestellt (postfix)

Post by duergner » 2006-05-01 18:03

In dem du die virtual Tabellen auch als virtual und nicht als alias einbindest.

der kleine tux
Posts: 97
Joined: 2005-10-29 04:12
Location: Planet Erde

Re: mails werden nicht zugestellt (postfix)

Post by der kleine tux » 2006-05-01 18:08

schaut dann ca so aus

Code: Select all

virtual_maps = hash:/etc/postfix/confixx_virtualUsers, hash:/etc/postfix/confixx_localDomains
gruss

tobiask
Posts: 164
Joined: 2004-05-02 12:08
Location: NRW

Re: mails werden nicht zugestellt (postfix)

Post by tobiask » 2006-05-01 18:31

Der kleine Tux wrote:schaut dann ca so aus

Code: Select all

virtual_maps = hash:/etc/postfix/confixx_virtualUsers, hash:/etc/postfix/confixx_localDomains
gruss
hab das jetzt so drin und den alias rausgenommen, aber funzt noch immer nicht, leider ...

Code: Select all

p15156934:/etc/postfix # postconf -n
body_checks = pcre:/etc/postfix/body_pcre
broken_sasl_auth_clients = yes
canonical_maps = hash:/etc/postfix/canonical
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter =
daemon_directory = /usr/lib/postfix
debug_peer_level = 2
default_privs = autoresponder
defer_transports =
disable_dns_lookups = no
disable_vrfy_command = yes
header_checks = regexp:/etc/postfix/header_checks
inet_interfaces = all
mail_owner = postfix
mail_spool_directory = /var/mail
mailbox_size_limit = 0
mailbox_transport =
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
masquerade_classes = envelope_sender, header_sender, header_recipient
masquerade_domains =
masquerade_exceptions = root
message_size_limit = 10240000
mydestination = $myhostname, localhost.$mydomain
myhostname = p15156934.pureserver.info
newaliases_path = /usr/bin/newaliases
program_directory = /usr/lib/postfix
queue_directory = /var/spool/postfix
readme_directory = /usr/share/doc/packages/postfix/README_FILES
relayhost =
relocated_maps = hash:/etc/postfix/relocated
sample_directory = /usr/share/doc/packages/postfix/samples
sender_canonical_maps = hash:/etc/postfix/sender_canonical
sendmail_path = /usr/sbin/sendmail
setgid_group = maildrop
smtp_use_tls = no
smtpd_client_restrictions =
smtpd_helo_required = no
smtpd_helo_restrictions =
smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination,reject_non_fqdn_sender,reject_unknown_sender_domain
smtpd_sasl_auth_enable = yes
smtpd_sasl_security_options = noanonymous
smtpd_sender_restrictions = hash:/etc/postfix/access
smtpd_tls_CAfile = /etc/ssl/certs/p15156934.pureserver.info-sample-ca.crt
smtpd_tls_cert_file = /etc/postfix/cert.pem
smtpd_tls_key_file = /etc/postfix/key.pem
smtpd_tls_loglevel = 1
smtpd_tls_received_header = yes
smtpd_tls_session_cache_timeout = 3600s
smtpd_use_tls = yes
strict_rfc821_envelopes = no
tls_random_source = dev:/dev/urandom
transport_maps = hash:/etc/postfix/transport
unknown_local_recipient_reject_code = 550

der kleine tux
Posts: 97
Joined: 2005-10-29 04:12
Location: Planet Erde

Re: mails werden nicht zugestellt (postfix)

Post by der kleine tux » 2006-05-01 18:46

postmap !!
postfix reload
zb
postmap hash:/etc/postfix/confixx_virtualUsers

gruss

tobiask
Posts: 164
Joined: 2004-05-02 12:08
Location: NRW

Re: mails werden nicht zugestellt (postfix)

Post by tobiask » 2006-05-01 20:26

ups ... danke

hab jetzt folg. gemacht:

Code: Select all

postmap /etc/postfix/confixx_localDomains
postmap /etc/postfix/confixx_virtualUsers
postfix reload
aba mails kommen immer noch nicht an ...

duergner
RSAC
Posts: 976
Joined: 2003-08-20 11:30
Location: Pittsburgh, PA, USA

Re: mails werden nicht zugestellt (postfix)

Post by duergner » 2006-05-01 20:38

Hmm was sagt denn das mail.log? was steht denn in den virtual Dateien eigentlich drinnen?

tobiask
Posts: 164
Joined: 2004-05-02 12:08
Location: NRW

Re: mails werden nicht zugestellt (postfix)

Post by tobiask » 2006-05-01 21:27

duergner wrote:Hmm was sagt denn das mail.log? was steht denn in den virtual Dateien eigentlich drinnen?

Code: Select all

p15156934:/var/log # tail mail
May  1 21:11:25 p15156934 postfix/cleanup[10396]: EFBC6C0432D: hold: header Received: from alphonse.purinmail.com (ehlo gator.com.168city.com [12.4.24.230])?         by infobel.com with SMTP id WKXO0SU47F?         for <webmaster@mynickpage.de>; Mon, 01 May 2006 12:11:28 -0800 from 12-219-51-209.client.mchsi.com[12.219.51.209]; from=<custservice-ref-284744766534@vr-networld.de> to=<webmaster@mynickpage.de> proto=SMTP helo=<12-219-51-209.client.mchsi.com>
May  1 21:11:25 p15156934 postfix/cleanup[10396]: EFBC6C0432D: hold: header Received: from altern.org (unknown [27.150.24.114])?         by grungecafe.com with SMTP id 1TKEYLX5CQ?         for <webmaster@mynickpage.de>; Mon, 01 May 2006 22:08:28 +0200 from 12-219-51-209.client.mchsi.com[12.219.51.209]; from=<custservice-ref-284744766534@vr-networld.de> to=<webmaster@mynickpage.de> proto=SMTP helo=<12-219-51-209.client.mchsi.com>
May  1 21:11:25 p15156934 postfix/cleanup[10396]: EFBC6C0432D: message-id=<20060501191124.EFBC6C0432D@p15156934.pureserver.info>
May  1 21:11:26 p15156934 postfix/smtpd[10394]: disconnect from 12-219-51-209.client.mchsi.com[12.219.51.209]
May  1 21:13:03 p15156934 postfix/smtpd[10394]: connect from dte43.neoplus.adsl.tpnet.pl[83.24.242.43]
May  1 21:13:04 p15156934 postfix/smtpd[10394]: 08F34C04330: client=dte43.neoplus.adsl.tpnet.pl[83.24.242.43]
May  1 21:13:06 p15156934 postfix/cleanup[10396]: 08F34C04330: hold: header Received: from dte43.neoplus.adsl.tpnet.pl (dte43.neoplus.adsl.tpnet.pl [83.24.242.43])??by p15156934.pureserver.info (Postfix) with SMTP id 08F34C04330??for <umaster@mynickpage.de>; Mon,  1 May 2006  from dte43.neoplus.adsl.tpnet.pl[83.24.242.43]; from=<onlinesupport_id_8674143616@vr-networld.de> to=<umaster@mynickpage.de> proto=SMTP helo=<dte43.neoplus.adsl.tpnet.pl>
May  1 21:13:06 p15156934 postfix/cleanup[10396]: 08F34C04330: hold: header Received: from boeotian.fiiqmx.net (ehlo fiiqmx.net.easydns.com [80.243.35.32])?        by sexywivesads.com with SMTP id EBBAV6G3WI?        for <umaster@mynickpage.de>; Tue, 02 May 2006 04:16:12 -0800 from dte43.neoplus.adsl.tpnet.pl[83.24.242.43]; from=<onlinesupport_id_8674143616@vr-networld.de> to=<umaster@mynickpage.de> proto=SMTP helo=<dte43.neoplus.adsl.tpnet.pl>
May  1 21:13:06 p15156934 postfix/cleanup[10396]: 08F34C04330: message-id=<20060501191304.08F34C04330@p15156934.pureserver.info>
May  1 21:13:09 p15156934 postfix/smtpd[10394]: disconnect from dte43.neoplus.adsl.tpnet.pl[83.24.242.43]

Code: Select all

p15156934:/var/log # tail mail.info
May  1 21:13:04 p15156934 postfix/smtpd[10394]: 08F34C04330: client=dte43.neoplus.adsl.tpnet.pl[83.24.242.43]
May  1 21:13:06 p15156934 postfix/cleanup[10396]: 08F34C04330: hold: header Received: from dte43.neoplus.adsl.tpnet.pl (dte43.neoplus.adsl.tpnet.pl [83.24.242.43])??by p15156934.pureserver.info (Postfix) with SMTP id 08F34C04330??for <umaster@mynickpage.de>; Mon,  1 May 2006  from dte43.neoplus.adsl.tpnet.pl[83.24.242.43]; from=<onlinesupport_id_8674143616@vr-networld.de> to=<umaster@mynickpage.de> proto=SMTP helo=<dte43.neoplus.adsl.tpnet.pl>
May  1 21:13:06 p15156934 postfix/cleanup[10396]: 08F34C04330: hold: header Received: from boeotian.fiiqmx.net (ehlo fiiqmx.net.easydns.com [80.243.35.32])?        by sexywivesads.com with SMTP id EBBAV6G3WI?        for <umaster@mynickpage.de>; Tue, 02 May 2006 04:16:12 -0800 from dte43.neoplus.adsl.tpnet.pl[83.24.242.43]; from=<onlinesupport_id_8674143616@vr-networld.de> to=<umaster@mynickpage.de> proto=SMTP helo=<dte43.neoplus.adsl.tpnet.pl>
May  1 21:13:06 p15156934 postfix/cleanup[10396]: 08F34C04330: message-id=<20060501191304.08F34C04330@p15156934.pureserver.info>
May  1 21:13:09 p15156934 postfix/smtpd[10394]: disconnect from dte43.neoplus.adsl.tpnet.pl[83.24.242.43]
May  1 21:24:53 p15156934 postfix/smtpd[11234]: warning: dict_nis_init: NIS domain name not set - NIS lookups disabled
May  1 21:24:53 p15156934 postfix/smtpd[11234]: connect from moutng.kundenserver.de[212.227.126.171]
May  1 21:24:53 p15156934 postfix/smtpd[11234]: 11D38C04331: client=moutng.kundenserver.de[212.227.126.171]
May  1 21:24:53 p15156934 postfix/smtpd[11234]: 11D38C04331: reject: RCPT from moutng.kundenserver.de[212.227.126.171]: 450 <thomas@positive-id.biz>: Sender address rejected: Domain not found; from=<thomas@positive-id.biz> to=<marketing@mynickpage.de> proto=ESMTP helo=<moutng.kundenserver.de>
May  1 21:24:55 p15156934 postfix/smtpd[11234]: disconnect from moutng.kundenserver.de[212.227.126.171]
und in den virtual dateien steht:

Code: Select all

p15156934:/etc/postfix # cat confixx_localDomains
xn--dng-sna.de confixx
killwebwa.de confixx
smsvertretung.de confixx
cheatcomm.de confixx
mynickpage.name confixx
mynickpage.de confixx
doeng.de confixx
mynickpage.com confixx
clint-band.de confixx
mynickmail.de confixx
bkproject.de confixx
comm7.mynickpage.com confixx
mynickpage.org confixx
gim-magazin.de confixx
ha9d.mynickpage.name confixx
und

Code: Select all

p15156934:/etc/postfix # cat confixx_localDomains
xn--dng-sna.de confixx
killwebwa.de confixx
smsvertretung.de confixx
cheatcomm.de confixx
mynickpage.name confixx
mynickpage.de confixx
doeng.de confixx
mynickpage.com confixx
clint-band.de confixx
mynickmail.de confixx
bkproject.de confixx
comm7.mynickpage.com confixx
mynickpage.org confixx
gim-magazin.de confixx
ha9d.mynickpage.name confixx
p15156934:/etc/postfix #
p15156934:/etc/postfix # cat confixx_virtualUsers
webmaster@ha9d.mynickpage.name web4p1
marketing@mynickpage.de sh@np-media.de
ha9d@mynickpage.de christophh@universal-x.com
messdiener@comm7.mynickpage.com web6p3
oliver@killwebwa.de ich.oliver.hahn@web.de
info@smsvertretung.de web8p1
webmaster@smsvertretung.de web8p1
admin@smsvertretung.de web8p1
register@smsvertretung.de web8p1
webmaster@cheatcomm.de confixx-du-77
hoster@cheatcomm.de web6p2
steffen.eusterholz@cheatcomm.de steffen.eusterholz@gmail.com
npmedia@cheatcomm.de web6p2
comm7@cheatcomm.de web6p1
support@cheatcomm.de confixx-du-84
marketing@cheatcomm.de web6p2
philipp@ha9d.mynickpage.name web4p2
co-admin@cheatcomm.de steffen.eusterholz@gmail.com
mastersw@cheatcomm.de mastersw@web.de
heni@clint-band.de henibl@gmx.de
dave@clint-band.de kleindave@metaledge.de
merch@clint-band.de confixx-du-103
band@clint-band.de henibl@gmx.de
info@bkproject.de bk-project@gmx.de
booking@bkproject.de djmatze@gmx.info
partypix@bkproject.de bk-project@gmx.de
matthias@bkproject.de bk-project@gmx.de
webmaster@gim-magazin.de web6p1
leiterrunde@comm7.mynickpage.com web6p3
gewinnspiel@cheatcomm.de web6p1
bluestorm@cheatcomm.de steffen.eusterholz@gmail.com
urlaubsmeldung@comm7.mynickpage.com web6p3
super-cheater@cheatcomm.de kazzak@gmx.de
webmaster@mynickpage.de web1p2
support@mynickpage.de web1p2
webmaster@doeng.de web1p2
webmaster@xn--dng-sna.de web1p2
transitron@comm7.mynickpage.com web6p4
thomas@comm7.mynickpage.com web6p3
@mynickpage.com web1p1
@mynickpage.org web1p1
@mynickpage.de web1p1
@mynickpage.name web1p1
@cheatcomm.de web6p1
@gim-magazin.de web6p1
@mynickmail.de web1p1
@comm7.mynickpage.com web6p1

# Majordomo support for smsvertretung.de
majordomo@smsvertretung.de majordomo-144
majordomo-owner@smsvertretung.de web8

# directadminmail @ smsvertretung.de : virtual users of mailing list
directadminmail@smsvertretung.de directadminmail-144
directadminmail-approval@smsvertretung.de admin@smsvertretung.de
directadminmail-outgoing@smsvertretung.de directadminmail-144-outgoing
directadminmail-request@smsvertretung.de directadminmail-144-request
directadminmail-archive@smsvertretung.de directadminmail-144-archive
owner-directadminmail@smsvertretung.de admin@smsvertretung.de

das sieht ja alles gut aus, die .db dateien sind auch bearbeitet worden, steht auf dem aktuellen datum ...
aber leider kommen die mails trotzdem nicht an ...