Interpretation Fehler beim Plattentest

FreeBSD, Gentoo, openSUSE, CentOS, Ubuntu, Debian
franki
Posts: 60
Joined: 2005-05-31 16:23
Location: Dresden

Interpretation Fehler beim Plattentest

Post by franki » 2005-06-01 10:07

Bei einer SCSI-Platte findet der lange Selbsttest einen Fehler:
smartctl version 5.33 [i686-pc-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

Device: IBM DDYS-T36950M Version: S93E
Serial number: VFLA3844
Device type: disk
Transport protocol: Fibre channel (FCP-2)
Local Time is: Wed Jun 1 09:49:00 2005 CEST
Device supports SMART and is Enabled
Temperature Warning Enabled
SMART Health Status: OK

Current Drive Temperature: 49 C
Drive Trip Temperature: 85 C
Manufactured in week 45 of year 2000
Current start stop count: 61 times
Recommended maximum start stop count: 10000 times

Error counter log:
Errors Corrected by Total Correction Gigabytes Total
EEC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 0 0 0 1 1 533.117 0
write: 0 2 0 8 8 824.105 0
verify: 0 0 0 0 0 68.619 0

Non-medium error count: 0

Error Events logging not supported

SMART Self-test log
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
Description number (hours)
# 1 Background long Failed in segment --> 3 35544 - [0x4 0x3e 0x3]
# 2 Background long Failed in segment --> 3 35527 - [0x4 0x3e 0x3]
# 3 Background short Completed - 35501 - [- - -]

Long (extended) Self Test duration: 1340 seconds [22.3 minutes]
Weiß jemand, wie das zu interpretieren ist? Muß die Platte sofort getauscht werden - oder ist evtl. ein defekter Sektor zu tolerieren?

Gruß von Franki.

captaincrunch
Userprojekt
Userprojekt
Posts: 7225
Joined: 2002-10-09 14:30
Location: Dorsten

Re: Interpretation Fehler beim Plattentest

Post by captaincrunch » 2005-06-01 10:49

Seit wann unterstützen SCSI-Platten SMART? 8O
DebianHowTo
echo "[q]sa[ln0=aln256%Pln256/snlbx]sb729901041524823122snlbxq"|dc

franki
Posts: 60
Joined: 2005-05-31 16:23
Location: Dresden

Re: Interpretation Fehler beim Plattentest

Post by franki » 2005-06-01 11:07

Seit wann unterstützen SCSI-Platten SMART?
Schau mal http://smartmontools.sourceforge.net/sm ... _scsi.html hier.