Problem mit Software Raid (es löst sich auf) ?

FreeBSD, Gentoo, openSUSE, CentOS, Ubuntu, Debian
mettybirdy
Posts: 6
Joined: 2004-06-13 17:58

Problem mit Software Raid (es löst sich auf) ?

Post by mettybirdy » 2005-05-25 20:21

Hallo zusammen,

seit ein paar Monaten habe ich große Probleme mit meinem Server. Dieser stürtzt ohne Vorankündigung ab. Suse 9.1 System Alle Suse Updates drauf.

ICh habe 2 Festplatte a 120 GB. die mit einem Software Raid laufen.

Laut dem Support meines Providers löst sich das Software Raid auf aber wie kann das sein ???

Hier die Logdatei der boot.msg
Inspecting /boot/System.map-2.6.5-7.151-default
Loaded 24300 symbols from /boot/System.map-2.6.5-7.151-default.
Symbols match kernel version 2.6.5.
No module symbols loaded - kernel modules not enabled.

klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.6.5-7.151-default (geeko@buildhost) (gcc version 3.3.3 (SuSE Linux)) #1 Fri Mar 18 11:31:21 UTC 2005
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
<4> BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
<4> BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
<4> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
<5>501MB vmalloc/ioremap area available.
<5>0MB HIGHMEM available.
<5>511MB LOWMEM available.
<4>On node 0 totalpages: 131056
<4> DMA zone: 4096 pages, LIFO batch:1
<4> Normal zone: 126960 pages, LIFO batch:16
<4> HighMem zone: 0 pages, LIFO batch:1
<6>DMI 2.3 present.
<6>ACPI: RSDP (v000 AMI ) @ 0x000fab70
<6>ACPI: RSDT (v001 AMIINT SiS740XX 0x00001000 MSFT 0x0100000b) @ 0x1fff0000
<6>ACPI: FADT (v001 AMIINT SiS740XX 0x00000011 MSFT 0x0100000b) @ 0x1fff0030
<6>ACPI: MADT (v001 AMIINT SiS740XX 0x00001000 MSFT 0x0100000b) @ 0x1fff00c0
<6>ACPI: DSDT (v001 SiS 746 0x00000100 MSFT 0x0100000d) @ 0x00000000
<6>ACPI: PM-Timer IO Port: 0x808
<6>ACPI: local apic disabled
<4>Built 1 zonelists
<4>Kernel command line: auto BOOT_IMAGE=Linux ro root=900 resume=/dev/md4 splash=silent desktop
<6>bootsplash: silent mode.
<6>Initializing CPU#0
<4>PID hash table entries: 2048 (order 11: 16384 bytes)
<4>CKRM Initialization
<4>...... Initializing ClassType<taskclass> ........
<4>...... Initializing ClassType<socketclass> ........
<4>CKRM Initialization done
<4>Detected 1837.420 MHz processor.
<6>Using tsc for high-res timesource
<4>Console: colour dummy device 80x25
<4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 514116k/524224k available (2048k kernel code, 9604k reserved, 702k data, 216k init, 0k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<7>Calibrating delay loop... 3637.24 BogoMIPS
<6>Security Scaffold v1.0.0 initialized
<6>SELinux: Disabled at boot.
<4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
<7>CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
<7>CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 512K (64 bytes/line)
<7>CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<4>CPU: AMD Athlon(tm) XP 2500+ stepping 00
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<6>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
<6>Looking for DSDT in initrd ...No customized DSDT found in initrd!
<6>Freeing initrd memory: 1166k freed
<6>NET: Registered protocol family 16
<6>PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=2
<6>PCI: Using configuration type 1
<6>mtrr: v2.0 (20020519)
<6>ACPI: Subsystem revision 20040326
<4>ACPI: IRQ9 SCI: Edge set to Level Trigger.
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<4>Uncovering SIS963 that hid as a SIS503 (compatible=0)
<6>Enabling SiS 96x SMBus.
<7>ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
<6>ACPI: Power Resource [URP1] (off)
<6>ACPI: Power Resource [URP2] (off)
<6>ACPI: Power Resource [FDDP] (off)
<6>ACPI: Power Resource [LPTP] (off)
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 *12 14 15)
<4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>PCI: Using ACPI for IRQ routing
<6>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
<4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
<6>ACPI: PCI interrupt 0000:00:02.1 -> GSI 11 (level, low) -> IRQ 11
<4>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
<6>ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 5 (level, low) -> IRQ 5
<4>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 12
<6>ACPI: PCI interrupt 0000:00:03.1 -> GSI 12 (level, low) -> IRQ 12
<4>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
<6>ACPI: PCI interrupt 0000:00:03.2[D] -> GSI 10 (level, low) -> IRQ 10
<4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3
<6>ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 3 (level, low) -> IRQ 3
<6>ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 11 (level, low) -> IRQ 11
<6>ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 11 (level, low) -> IRQ 11
<6>vesafb: framebuffer at 0xcc000000, mapped to 0xe0807000, size 2048k
<6>vesafb: mode is 640x480x16, linelength=1280, pages=2
<6>vesafb: protected mode interface info at c000:596a
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<6>fb0: VESA VGA frame buffer device
<6>apm: BIOS not found.
<4>Initial HugeTLB pages allocated: 0
<5>VFS: Disk quotas dquot_6.5.1
<6>Initializing Cryptographic API
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>bootsplash 3.1.6-2004/03/31: looking for picture...<6>...no good signature found.
<4>Console: switching to colour frame buffer device 80x30
<6>Real Time Clock Driver v1.12
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
<4>Using anticipatory io scheduler
<4>floppy0: no floppy controllers found
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>SIS5513: IDE controller at PCI slot 0000:00:02.5
<6>SIS5513: chipset revision 0
<6>SIS5513: not 100%% native mode: will probe irqs later
<6>SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
<6> ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
<6> ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
<4>hda: SAMSUNG SP1203N, ATA DISK drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>hdc: SAMSUNG SP1213N, ATA DISK drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>hda: max request size: 1024KiB
<6>hda: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
<6> hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 >
<4>hdc: max request size: 1024KiB
<6>hdc: 234493056 sectors (120060 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
<6> hdc: hdc1 < hdc5 hdc6 hdc7 hdc8 hdc9 hdc10 hdc11 >
<4>ide-floppy driver 0.99.newide
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>input: AT Translated Set 2 keyboard on isa0060/serio0
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>NET: Registered protocol family 2
<6>IP: routing cache hash table of 4096 buckets, 32Kbytes
<4>TCP established hash table entries: 32768 (order: 6, 262144 bytes)
<4>TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
<6>TCP: Hash tables configured (established 32768 bind 32768)
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 8
<6>NET: Registered protocol family 20
<4>Resume Machine: resuming from /dev/md4
<4>Resuming from device unknown-block(0,0)
<4>Resume Machine: Error -6 resuming
<6>ACPI: (supports S0 S1 S4 S5)
<4>resid is -1 name is cpu <NULL>
<4>CKRM .. create res clsobj for resouce <cpu>class <taskclass> par=00000000
<4>........init_ckrm_sched_res , resid= 4
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: considering hdc11 ...
<6>md: adding hdc11 ...
<4>md: hdc9 has different UUID to hdc11
<4>md: hdc8 has different UUID to hdc11
<4>md: hdc7 has different UUID to hdc11
<4>md: hdc6 has different UUID to hdc11
<4>md: hdc5 has different UUID to hdc11
<6>md: adding hda10 ...
<4>md: hda9 has different UUID to hdc11
<4>md: hda8 has different UUID to hdc11
<4>md: hda7 has different UUID to hdc11
<4>md: hda6 has different UUID to hdc11
<4>md: hda5 has different UUID to hdc11
<6>md: created md5
<6>md: bind<hda10>
<6>md: bind<hdc11>
<6>md: running: <hdc11><hda10>
<4>md: personality 3 is not loaded!
<4>md: do_md_run() returned -22
<6>md: md5 stopped.
<6>md: unbind<hdc11>
<6>md: export_rdev(hdc11)
<6>md: unbind<hda10>
<6>md: export_rdev(hda10)
<6>md: considering hdc9 ...
<6>md: adding hdc9 ...
<4>md: hdc8 has different UUID to hdc9
<4>md: hdc7 has different UUID to hdc9
<4>md: hdc6 has different UUID to hdc9
<4>md: hdc5 has different UUID to hdc9
<6>md: adding hda9 ...
<4>md: hda8 has different UUID to hdc9
<4>md: hda7 has different UUID to hdc9
<4>md: hda6 has different UUID to hdc9
<4>md: hda5 has different UUID to hdc9
<6>md: created md4
<6>md: bind<hda9>
<6>md: bind<hdc9>
<6>md: running: <hdc9><hda9>
<4>md: personality 3 is not loaded!
<4>md: do_md_run() returned -22
<6>md: md4 stopped.
<6>md: unbind<hdc9>
<6>md: export_rdev(hdc9)
<6>md: unbind<hda9>
<6>md: export_rdev(hda9)
<6>md: considering hdc8 ...
<6>md: adding hdc8 ...
<4>md: hdc7 has different UUID to hdc8
<4>md: hdc6 has different UUID to hdc8
<4>md: hdc5 has different UUID to hdc8
<6>md: adding hda8 ...
<4>md: hda7 has different UUID to hdc8
<4>md: hda6 has different UUID to hdc8
<4>md: hda5 has different UUID to hdc8
<6>md: created md3
<6>md: bind<hda8>
<6>md: bind<hdc8>
<6>md: running: <hdc8><hda8>
<4>md: personality 3 is not loaded!
<4>md: do_md_run() returned -22
<6>md: md3 stopped.
<6>md: unbind<hdc8>
<6>md: export_rdev(hdc8)
<6>md: unbind<hda8>
<6>md: export_rdev(hda8)
<6>md: considering hdc7 ...
<6>md: adding hdc7 ...
<4>md: hdc6 has different UUID to hdc7
<4>md: hdc5 has different UUID to hdc7
<6>md: adding hda7 ...
<4>md: hda6 has different UUID to hdc7
<4>md: hda5 has different UUID to hdc7
<6>md: created md2
<6>md: bind<hda7>
<6>md: bind<hdc7>
<6>md: running: <hdc7><hda7>
<4>md: kicking non-fresh hda7 from array!
<6>md: unbind<hda7>
<6>md: export_rdev(hda7)
<4>md: personality 3 is not loaded!
<4>md: do_md_run() returned -22
<6>md: md2 stopped.
<6>md: unbind<hdc7>
<6>md: export_rdev(hdc7)
<6>md: considering hdc6 ...
<6>md: adding hdc6 ...
<4>md: hdc5 has different UUID to hdc6
<6>md: adding hda6 ...
<4>md: hda5 has different UUID to hdc6
<6>md: created md1
<6>md: bind<hda6>
<6>md: bind<hdc6>
<6>md: running: <hdc6><hda6>
<4>md: kicking non-fresh hda6 from array!
<6>md: unbind<hda6>
<6>md: export_rdev(hda6)
<4>md: personality 3 is not loaded!
<4>md: do_md_run() returned -22
<6>md: md1 stopped.
<6>md: unbind<hdc6>
<6>md: export_rdev(hdc6)
<6>md: considering hdc5 ...
<6>md: adding hdc5 ...
<6>md: adding hda5 ...
<6>md: created md0
<6>md: bind<hda5>
<6>md: bind<hdc5>
<6>md: running: <hdc5><hda5>
<4>md: kicking non-fresh hdc5 from array!
<6>md: unbind<hdc5>
<6>md: export_rdev(hdc5)
<4>md: personality 3 is not loaded!
<4>md: do_md_run() returned -22
<6>md: md0 stopped.
<6>md: unbind<hda5>
<6>md: export_rdev(hda5)
<6>md: ... autorun DONE.
<5>RAMDISK: Compressed image found at block 0
<4>VFS: Mounted root (ext2 filesystem).
<6>md: raid1 personality registered as nr 3
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: considering hda5 ...
<6>md: adding hda5 ...
<6>md: adding hdc5 ...
<4>md: hdc6 has different UUID to hda5
<4>md: hda6 has different UUID to hda5
<4>md: hdc7 has different UUID to hda5
<4>md: hda7 has different UUID to hda5
<4>md: hda8 has different UUID to hda5
<4>md: hdc8 has different UUID to hda5
<4>md: hda9 has different UUID to hda5
<4>md: hdc9 has different UUID to hda5
<4>md: hda10 has different UUID to hda5
<4>md: hdc11 has different UUID to hda5
<6>md: created md0
<6>md: bind<hdc5>
<6>md: bind<hda5>
<6>md: running: <hda5><hdc5>
<4>md: kicking non-fresh hdc5 from array!
<6>md: unbind<hdc5>
<6>md: export_rdev(hdc5)
<6>raid1: raid set md0 active with 1 out of 2 mirrors
<6>md: considering hdc6 ...
<6>md: adding hdc6 ...
<6>md: adding hda6 ...
<4>md: hdc7 has different UUID to hdc6
<4>md: hda7 has different UUID to hdc6
<4>md: hda8 has different UUID to hdc6
<4>md: hdc8 has different UUID to hdc6
<4>md: hda9 has different UUID to hdc6
<4>md: hdc9 has different UUID to hdc6
<4>md: hda10 has different UUID to hdc6
<4>md: hdc11 has different UUID to hdc6
<6>md: created md1
<6>md: bind<hda6>
<6>md: bind<hdc6>
<6>md: running: <hdc6><hda6>
<4>md: kicking non-fresh hda6 from array!
<6>md: unbind<hda6>
<6>md: export_rdev(hda6)
<6>raid1: raid set md1 active with 1 out of 2 mirrors
<6>md: considering hdc7 ...
<6>md: adding hdc7 ...
<6>md: adding hda7 ...
<4>md: hda8 has different UUID to hdc7
<4>md: hdc8 has different UUID to hdc7
<4>md: hda9 has different UUID to hdc7
<4>md: hdc9 has different UUID to hdc7
<4>md: hda10 has different UUID to hdc7
<4>md: hdc11 has different UUID to hdc7
<6>md: created md2
<6>md: bind<hda7>
<6>md: bind<hdc7>
<6>md: running: <hdc7><hda7>
<4>md: kicking non-fresh hda7 from array!
<6>md: unbind<hda7>
<6>md: export_rdev(hda7)
<6>raid1: raid set md2 active with 1 out of 2 mirrors
<6>md: considering hda8 ...
<6>md: adding hda8 ...
<6>md: adding hdc8 ...
<4>md: hda9 has different UUID to hda8
<4>md: hdc9 has different UUID to hda8
<4>md: hda10 has different UUID to hda8
<4>md: hdc11 has different UUID to hda8
<6>md: created md3
<6>md: bind<hdc8>
<6>md: bind<hda8>
<6>md: running: <hda8><hdc8>
<6>raid1: raid set md3 active with 2 out of 2 mirrors
<6>md: considering hda9 ...
<6>md: adding hda9 ...
<6>md: adding hdc9 ...
<4>md: hda10 has different UUID to hda9
<4>md: hdc11 has different UUID to hda9
<6>md: created md4
<6>md: bind<hdc9>
<6>md: bind<hda9>
<6>md: running: <hda9><hdc9>
<6>raid1: raid set md4 active with 2 out of 2 mirrors
<6>md: considering hda10 ...
<6>md: adding hda10 ...
<6>md: adding hdc11 ...
<6>md: created md5
<6>md: bind<hdc11>
<6>md: bind<hda10>
<6>md: running: <hda10><hdc11>
<6>raid1: raid set md5 active with 2 out of 2 mirrors
<6>md: ... autorun DONE.
<5>ReiserFS: md0: found reiserfs format "3.6" with standard journal
<5>ReiserFS: md0: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: md0: journal params: device md0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: md0: checking transaction log (md0)
<5>ReiserFS: md0: replayed 6 transactions in 0 seconds
<5>ReiserFS: md0: Using r5 hash to sort names
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<5>Trying to move old root to /initrd ... failed
<5>Unmounting old root
<5>Trying to free ramdisk memory ... okay
<6>Freeing unused kernel memory: 216k freed
<6>Adding 1052152k swap on /dev/md4. Priority:42 extents:1
<4>reiserfs: enabling write barrier flush mode
<6>device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel@redhat.com
<4>md: raidstart(pid 1355) used deprecated START_ARRAY ioctl. This will not be supported beyond 2.6
<3>md: could not lock hda5.
<4>md: could not import hda5!
<4>md: autostart unknown-block(0,773) failed!
<4>md: raidstart(pid 1355) used deprecated START_ARRAY ioctl. This will not be supported beyond 2.6
<3>md: could not lock hdc6.
<4>md: could not import hdc6, trying to run array nevertheless.
<6>md: autorun ...
<6>md: considering hda6 ...
<6>md: adding hda6 ...
<4>md: md1 already running, cannot run hda6
<6>md: export_rdev(hda6)
<6>md: ... autorun DONE.
<4>md: raidstart(pid 1355) used deprecated START_ARRAY ioctl. This will not be supported beyond 2.6
<3>md: could not lock hdc7.
<4>md: could not import hdc7, trying to run array nevertheless.
<6>md: autorun ...
<6>md: considering hda7 ...
<6>md: adding hda7 ...
<4>md: md2 already running, cannot run hda7
<6>md: export_rdev(hda7)
<6>md: ... autorun DONE.
<3>md: could not lock hda8.
<4>md: could not import hda8!
<4>md: autostart unknown-block(0,776) failed!
<3>md: could not lock hda9.
<4>md: could not import hda9!
<4>md: autostart unknown-block(0,777) failed!
<3>md: could not lock hda10.
<4>md: could not import hda10!
<4>md: autostart unknown-block(0,778) failed!
<6>md: Autodetecting RAID arrays.
<3>md: could not lock hda6.
<1>md: could not import hda6!
<3>md: could not lock hda7.
<1>md: could not import hda7!
<6>md: autorun ...
<6>md: considering hda7 ...
<6>md: adding hda7 ...
<4>md: hda6 has different UUID to hda7
<4>md: hdc5 has different UUID to hda7
<4>md: md2 already running, cannot run hda7
<6>md: export_rdev(hda7)
<6>md: considering hda6 ...
<6>md: adding hda6 ...
<4>md: hdc5 has different UUID to hda6
<4>md: md1 already running, cannot run hda6
<6>md: export_rdev(hda6)
<6>md: considering hdc5 ...
<6>md: adding hdc5 ...
<4>md: md0 already running, cannot run hdc5
<6>md: export_rdev(hdc5)
<6>md: ... autorun DONE.
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on hda1, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<5>ReiserFS: md5: found reiserfs format "3.6" with standard journal
<5>ReiserFS: md5: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: md5: journal params: device md5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: md5: checking transaction log (md5)
<5>ReiserFS: md5: Using r5 hash to sort names
<5>ReiserFS: md3: found reiserfs format "3.6" with standard journal
<5>ReiserFS: md3: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: md3: journal params: device md3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: md3: checking transaction log (md3)
<5>ReiserFS: md3: Using r5 hash to sort names
<5>ReiserFS: md1: found reiserfs format "3.6" with standard journal
<5>ReiserFS: md1: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: md1: journal params: device md1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: md1: checking transaction log (md1)
<5>ReiserFS: md1: Using r5 hash to sort names
<5>ReiserFS: md2: found reiserfs format "3.6" with standard journal
<5>ReiserFS: md2: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: md2: journal params: device md2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: md2: checking transaction log (md2)
<5>ReiserFS: md2: Using r5 hash to sort names
<5>ReiserFS: md2: Removing [10 4090 0x0 SD]..done
<5>ReiserFS: md2: There were 1 uncompleted unlinks/truncates. Completed
<6>subfs 0.9
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console) at Mon May 16 13:33:18 2005

<notice>run boot scripts (boot.proc)
<notice>exit status of (boot.proc) is (0)
<notice>run boot scripts (boot.shm)
Mounting shared memory FS on /dev/shmdone
<notice>exit status of (boot.shm) is (0)
<notice>run boot scripts (boot.rootfsck)
Activating swap-devices in /etc/fstab...
doneChecking root file system...
fsck 1.34 (25-Jul-2003)
Reiserfs super block in block 16 on 0x900 of format 3.6 with standard journal
Blocks (total/free): 787152/656098 by 4096 bytes
Filesystem is NOT clean
Filesystem seems mounted read-only. Skipping journal replay.
Checking internal tree..finished
done<notice>exit status of (boot.rootfsck) is (0)
<notice>run boot scripts (boot.md boot.device-mapper)
Activating device mapper...
Creating /dev/mapper/control character device with major:10 minor:63.
done
Initializing Multiple Devices...
considering /dev/md0...
/dev/md0 is not a RAID0 or LINEAR array, skipping.
considering /dev/md1...
/dev/md1 is not a RAID0 or LINEAR array, skipping.
considering /dev/md2...
/dev/md2 is not a RAID0 or LINEAR array, skipping.
considering /dev/md3...
/dev/md3 is not a RAID0 or LINEAR array, skipping.
considering /dev/md4...
/dev/md4 is not a RAID0 or LINEAR array, skipping.
considering /dev/md5...
/dev/md5 is not a RAID0 or LINEAR array, skipping.
/dev/md0: Invalid argument
/dev/md3: Invalid argument
/dev/md4: Invalid argument
/dev/md5: Invalid argument
<notice>exit status of (boot.md boot.device-mapper) is (0 0)
<notice>run boot scripts (boot.localfs)
Checking file systems...
fsck 1.34 (25-Jul-2003)
/dev/hda1: recovering journal
/dev/hda1: clean, 35/26104 files, 13155/104388 blocks
Reiserfs super block in block 16 on 0x905 of format 3.6 with standard journal
Blocks (total/free): 24426800/23564973 by 4096 bytes
Filesystem is NOT clean
Replaying journal..
Trans replayed: mountid 29, transid 167407, desc 4692, len 5, commit 4698, next trans offset 4681
Trans replayed: mountid 29, transid 167408, desc 4699, len 10, commit 4710, next trans offset 4693
Trans replayed: mountid 29, transid 167409, desc 4711, len 53, commit 4765, next trans offset 4748
Trans replayed: mountid 29, transid 167410, desc 4766, len 7, commit 4774, next trans offset 4757
Trans replayed: mountid 29, transid 167411, desc 4775, len 58, commit 4834, next trans offset 4817
Trans replayed: mountid 29, transid 167412, desc 4835, len 54, commit 4890, next trans offset 4873
Trans replayed: mountid 29, transid 167413, desc 4891, len 52, commit 4944, next trans offset 4927
Trans replayed: mountid 29, transid 167414, desc 4945, len 54, commit 5000, next trans offset 4983
Trans replayed: mountid 29, transid 167415, desc 5001, len 19, commit 5021, next trans offset 5004
Reiserfs journal '/dev/md5' in blocks [18..8211]: 9 transactions replayed
Checking internal tree..finished
Reiserfs super block in block 16 on 0x903 of format 3.6 with standard journal
Blocks (total/free): 132512/123949 by 4096 bytes
Filesystem is NOT clean
Replaying journal..
Trans replayed: mountid 29, transid 51928, desc 5674, len 1, commit 5676, next trans offset 5659
Reiserfs journal '/dev/md3' in blocks [18..8211]: 1 transactions replayed
Checking internal tree..finished
Reiserfs super block in block 16 on 0x901 of format 3.6 with standard journal
Blocks (total/free): 2098464/813829 by 4096 bytes
Filesystem is NOT clean
Replaying journal..
Trans replayed: mountid 29, transid 67997, desc 4775, len 5, commit 4781, next trans offset 4764
Trans replayed: mountid 29, transid 67998, desc 4782, len 23, commit 4806, next trans offset 4789
Trans replayed: mountid 29, transid 67999, desc 4807, len 23, commit 4831, next trans offset 4814
Trans replayed: mountid 29, transid 68000, desc 4832, len 6, commit 4839, next trans offset 4822
Trans replayed: mountid 29, transid 68001, desc 4840, len 5, commit 4846, next trans offset 4829
Trans replayed: mountid 29, transid 68002, desc 4847, len 3, commit 4851, next trans offset 4834
Reiserfs journal '/dev/md1' in blocks [18..8211]: 6 transactions replayed
Checking internal tree..finished
Reiserfs super block in block 16 on 0x902 of format 3.6 with standard journal
Blocks (total/free): 1574336/1495621 by 4096 bytes
Filesystem is NOT clean
Replaying journal..
Trans replayed: mountid 29, transid 772342, desc 2304, len 1, commit 2306, next trans offset 2289
Trans replayed: mountid 29, transid 772343, desc 2307, len 16, commit 2324, next trans offset 2307
Reiserfs journal '/dev/md2' in blocks [18..8211]: 2 transactions replayed
Checking internal tree..finished
doneSetting updone
Mounting local file systems...
proc on /proc type proc (rw)
tmpfs on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hda1 on /boot type ext3 (rw,acl,user_xattr)
/dev/md5 on /home type reiserfs (rw,acl,user_xattr,usrquota)
/dev/md3 on /tmp type reiserfs (rw,acl,user_xattr)
/dev/md1 on /usr type reiserfs (rw,acl,user_xattr)
/dev/md2 on /var type reiserfs (rw,acl,user_xattr)
/dev/hdb on /media/dvd type subfs (ro,nosuid,nodev,fs=cdfss,procuid,iocharset=utf8)
done<notice>exit status of (boot.localfs) is (0)
<notice>run boot scripts (boot.crypto)
<notice>exit status of (boot.crypto) is (0)
<notice>run boot scripts (boot.swap boot.scpm boot.restore_permissions boot.loadmodules)
Loading required kernel modules
doneRestore device permissionsdone
Activating remaining swap-devices in /etc/fstab...
done<notice>exit status of (boot.swap boot.scpm boot.restore_permissions boot.loadmodules) is (0 0 0 0)
<notice>run boot scripts (boot.idedma boot.clock)
Setting up the CMOS clockdone
<notice>exit status of (boot.idedma boot.clock) is (0 0)
<notice>run boot scripts (boot.ldconfig)
Setting up timezone datadone
<notice>exit status of (boot.ldconfig) is (0)
<notice>run boot scripts (boot.sched boot.localnet boot.isapnp)
Setting scheduling timeslices unused
Setting up hostname 'server1'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
done
find: /tmp/ssh-*: No such file or directory
<notice>exit status of (boot.sched boot.localnet boot.isapnp) is (6 0 0)
<notice>run boot scripts (boot.klog boot.ipconfig)
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
Creating /var/log/boot.msg
done<notice>killproc: kill(1302,29)
<notice>exit status of (boot.klog boot.ipconfig) is (0 0)
System Boot Control: The system has been set up
Skipped features: boot.sched
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(1302,3)

Boot logging started on /dev/tty1(/dev/console) at Mon May 16 13:33:57 2005

Master Resource Control: previous runlevel: N, switching to runlevel: 3
<notice>start services (random hotplug)
Hotplug is already active (disable with NOHOTPLUG=1 at the boot prompt)done

INIT: Entering runlevel: 3


<notice>exit status of (random hotplug) is (0Initializing random number generatordone
0)
<notice>start services (coldplug)
coldplug scanning input: **done
scanning pci: ****.*****Wdone
scanning usb: done
. . . . . . . . . . . . . . . . . . . . . . . .done
<notice>exit status of (coldplug) is (0)
<notice>start services (psa-vpn)
psa-vpn: OpenVPN is disabled
<notice>exit status of (psa-vpn) is (0)
<notice>start services (network)
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
doneWaiting for mandatory devices: eth-id-00:e0:4c:de:46:89
20 19 18 17 16 15 13
eth1 device: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
eth1 configuration: eth-id-00:e0:4c:de:46:89
eth1 IP address: 83.243.42.24/25
doneSetting up service network . . . . . . . . . . . . . . . .done
<notice>exit status of (network) is (0)
<notice>start services (syslog)
Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd -a /var/lib/named/dev/log -a /var/lib/ntp/dev/log ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=25 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=30 SHLVL=2 BOOT_IMAGE=Linux splash=silent sscripts=42 _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=25 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=30 SHLVL=2 BOOT_IMAGE=Linux splash=silent sscripts=42 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
<notice>exit status of (syslog) is (0)
<notice>start services (resmgr portmap)
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=26 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=30 SHLVL=2 BOOT_IMAGE=Linux splash=silent sscripts=42 _=/sbin/startproc DAEMON=/sbin/portmap ]
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=26 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=30 SHLVL=2 BOOT_IMAGE=Linux splash=silent sscripts=42 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
Starting RPC portmap daemondone
Starting resource managerdone
<notice>exit status of (resmgr portmap) is (0 0)
<notice>start services (nfsboot)
Starting nfsboot (sm-notify) done
<notice>exit status of (nfsboot) is (0)
<notice>start services (sshd spamd powersaved fbset courier-imap alsasound)
Starting sound driverdone
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=29 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=30 SHLVL=2 BOOT_IMAGE=Linux splash=silent sscripts=42 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
<notice>startproc: execve (/usr/sbin/spamd) [ /usr/sbin/spamd -d -c -a -L ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=29 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=30 SHLVL=2 BOOT_IMAGE=Linux splash=silent sscripts=42 _=/sbin/startproc DAEMON=/usr/sbin/spamd ]
Starting SSH daemondone
Starting spamd done
<notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -e /etc/powersave.conf -a resmgr -v 3 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=29 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=30 SHLVL=2 BOOT_IMAGE=Linux splash=silent sscripts=42 _=/sbin/startproc DAEMON=/usr/sbin/powersaved ]
loading ACPI modules (ac battery button fan processor thermal ) Starting powersaved done
Starting Courier-IMAP server:
Starting imapddone
Starting imap-ssldone
Starting pop3done
Starting pop3-ssldone

<notice>exit status of (sshd spamd powersaved fbset courier-imap alsasound) is (0 0 0 0 0 0)
<notice>start services (smbfs kbd)
Mount SMB/ CIFS File Systems unused
Loading keymap qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table winkeys shiftctrl latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu -m trivial (K
done<notice>exit status of (smbfs kbd) is (6 0)
<notice>start services (hwscan)
Starting hardware scan on boot<notice>exit status of (hwscan) is (0)
<notice>start services (qmail psa drwebd)
<notice>startproc: execve (/opt/drweb/drwebd) [ /opt/drweb/drwebd -ini=/etc/drweb/drweb32.ini ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=38 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=30 SHLVL=2 BOOT_IMAGE=Linux splash=silent sscripts=42 _=/sbin/startproc DAEMON=/opt/drweb/drwebd ]
Starting Dr.Web (R) daemon Dr.Web (R) daemon for Linux/Plesk Edition, version 4.32.2 (2004-11-01)
done
Copyright (c) Igor Daniloff, 1992-2004
Doctor Web Ltd., Moscow, Russia
Support service: http://support.drweb.com
To purchase: http://buy.drweb.com

Engine version: 4.32b
Loading /var/drweb/bases/drwtoday.vdb - Ok, virus records: 421
Loading /var/drweb/bases/drw43239.vdb - Ok, virus records: 775
Loading /var/drweb/bases/drw43238.vdb - Ok, virus records: 1011
Loading /var/drweb/bases/drw43237.vdb - Ok, virus records: 656
Loading /var/drweb/bases/drw43236.vdb - Ok, virus records: 850
Loading /var/drweb/bases/drw43235.vdb - Ok, virus records: 1001
Loading /var/drweb/bases/drw43234.vdb - Ok, virus records: 554
Loading /var/drweb/bases/drw43233.vdb - Ok, virus records: 632
Loading /var/drweb/bases/drw43232.vdb - Ok, virus records: 516
Loading /var/drweb/bases/drw43231.vdb - Ok, virus records: 466
Loading /var/drweb/bases/drw43230.vdb - Ok, virus records: 901
Loading /var/drweb/bases/drw43229.vdb - Ok, virus records: 632
Loading /var/drweb/bases/drw43228.vdb - Ok, virus records: 584
Loading /var/drweb/bases/drw43227.vdb - Ok, virus records: 568
Loading /var/drweb/bases/drw43226.vdb - Ok, virus records: 533
Loading /var/drweb/bases/drw43225.vdb - Ok, virus records: 476
Loading /var/drweb/bases/drw43224.vdb - Ok, virus records: 484
Loading /var/drweb/bases/drw43223.vdb - Ok, virus records: 442
Loading /var/drweb/bases/drw43222.vdb - Ok, virus records: 371
Loading /var/drweb/bases/drw43221.vdb - Ok, virus records: 372
<notice>startproc: execve (/usr/sbin/xinetd) [ /usr/sbin/xinetd ], [ CONSOLE=/dev/console MYSQL_UNIX_PORT=/var/lib/mysql/mysql.sock SHELL=/bin/sh TERM=linux PERL5LIB=/usr/local/psa/lib/perl5/site_perl/5.8.3 progress=38 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 AUTOBOOT=YES PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ LANG=C PREVLEVEL=N LINES=30 SHLVL=3 BOOT_IMAGE=Linux OPENSSL_CONF=/usr/local/psa/admin/conf/openssl.cnf sscripts=42 splash=silent _=/sbin/startproc DAEMON=/usr/sbin/xinetd ]
Loading /var/drweb/bases/drw43220.vdb - Ok, virus records: 560
Loading /var/drweb/bases/drw43219.vdb - Ok, virus records: 412
Loading /var/drweb/bases/drw43218.vdb - Ok, virus records: 511
Loading /var/drweb/bases/drw43217.vdb - Ok, virus records: 512
Loading /var/drweb/bases/drw43216.vdb - Ok, virus records: 507
Loading /var/drweb/bases/drw43215.vdb - Ok, virus records: 539
Loading /var/drweb/bases/drw43214.vdb - Ok, virus records: 275
Loading /var/drweb/bases/drw43213.vdb - Ok, virus records: 404
Loading /var/drweb/bases/drw43212.vdb - Ok, virus records: 428
Loading /var/drweb/bases/drw43211.vdb - Ok, virus records: 494
Loading /var/drweb/bases/drw43210.vdb - Ok, virus records: 450
Loading /var/drweb/bases/drw43209.vdb - Ok, virus records: 639
Loading /var/drweb/bases/drw43208.vdb - Ok, virus records: 603
Loading /var/drweb/bases/drw43207.vdb - Ok, virus records: 620
Loading /var/drweb/bases/drw43206.vdb - Ok, virus records: 683
Loading /var/drweb/bases/drw43205.vdb - Ok, virus records: 525
Loading /var/drweb/bases/drw43204.vdb - Ok, virus records: 607
Loading /var/drweb/bases/drw43203.vdb - Ok, virus records: 409
Loading /var/drweb/bases/drw43202.vdb - Ok, virus records: 543
<notice>pidofproc: qmail-send 3597
Starting qmail: done
===> Reading /etc/psa/psa.conf ...
xinetd off
Starting INET services. (xinetd)done
xinetd off
Starting INET services. (xinetd)done
named off
Starting name server BIND 9 - Warning: /var/lib/named/var/run/named/named.pid exists! cp: `/etc/named.conf' and `/var/lib/named//etc/named.conf' are the same file
Loading /var/drweb/bases/drwebase.vdb - Ok, virus records: 51982
Loading /var/drweb/bases/drw43201.vdb - Ok, virus records: 364
Total virus records: 74312
Key file not found!
<notice>startproc: execve (/usr/sbin/named) [ /usr/sbin/named -t /var/lib/named -u named ], [ CONSOLE=/dev/console MYSQL_UNIX_PORT=/var/lib/mysql/mysql.sock SHELL=/bin/sh TERM=linux PERL5LIB=/usr/local/psa/lib/perl5/site_perl/5.8.3 progress=38 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 AUTOBOOT=YES PATH=/sbin:/usr/sbin:/bin:/usr/bin RUNLEVEL=3 PWD=/ LANG=C PREVLEVEL=N LINES=30 SHLVL=3 BOOT_IMAGE=Linux OPENSSL_CONF=/usr/local/psa/admin/conf/openssl.cnf sscripts=42 splash=silent _=/sbin/startproc DAEMON=/usr/sbin/named ]
Plesk authorization failed: HTTP request error [7]
Error: Plesk Software not running.
done
mysql off
Starting service MySQL
done
postgresql off
Starting PostgreSQLdone
psa-spamassassin on
Starting psa-spamassassin service: done
tomcat4 off
<notice>startproc: execve (/usr/sbin/httpd2-prefork) [ /usr/sbin/httpd2-prefork -f /etc/apache2/httpd.conf ], [ MYSQL_UNIX_PORT=/var/lib/mysql/mysql.sock CONSOLE=/dev/console TERM=linux SHELL=/bin/sh PERL5LIB=/usr/local/psa/lib/perl5/site_perl/5.8.3 get_module_list_done=true progress=38 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=80 get_includes_done=true PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/etc/init.d LANG=C PREVLEVEL=N LINES=30 SHLVL=4 BOOT_IMAGE=Linux OPENSSL_CONF=/usr/local/psa/admin/conf/openssl.cnf splash=silent sscripts=42 _=/sbin/startproc DAEMON=/usr/sbin/httpd2-prefork ]
<notice>killproc: kill(3898,10)
<notice>killproc: kill(3897,10)
<notice>killproc: kill(3896,10)
<notice>killproc: kill(3895,10)
<notice>killproc: kill(3894,10)
<notice>killproc: kill(3893,10)
<notice>killproc: kill(3886,10)
apache2 off
<notice>killproc: kill(3886,10)
Processing config directory: /usr/local/psa/admin/conf/httpsd.*.include
/usr/local/psa/admin/bin/httpsdctl start: httpd started
Starting Plesk: done
drwebd on
Starting Dr.Web (R) daemon <notice>startproc: execve (/opt/drweb/drwebd) [ /opt/drweb/drwebd -ini=/etc/drweb/drweb32.ini ], [ CONSOLE=/dev/console MYSQL_UNIX_PORT=/var/lib/mysql/mysql.sock SHELL=/bin/sh TERM=linux PERL5LIB=/usr/local/psa/lib/perl5/site_perl/5.8.3 progress=38 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=80 AUTOBOOT=YES PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ LANG=C PREVLEVEL=N LINES=30 SHLVL=3 BOOT_IMAGE=Linux OPENSSL_CONF=/usr/local/psa/admin/conf/openssl.cnf sscripts=42 splash=silent _=/sbin/startproc DAEMON=/opt/drweb/drwebd ]
Dr.Web (R) daemon for Linux/Plesk Edition, version 4.32.2 (2004-11-01)
Copyright (c) Igor Daniloff, 1992-2004
Doctor Web Ltd., Moscow, Russia
Support service: http://support.drweb.com
To purchase: http://buy.drweb.com

Engine version: 4.32b
Loading /var/drweb/bases/drwtoday.vdb - Ok, virus records: 421
Loading /var/drweb/bases/drw43239.vdb - Ok, virus records: 775
Loading /var/drweb/bases/drw43238.vdb - Ok, virus records: 1011
Loading /var/drweb/bases/drw43237.vdb - Ok, virus records: 656
Loading /var/drweb/bases/drw43236.vdb - Ok, virus records: 850
Loading /var/drweb/bases/drw43235.vdb - Ok, virus records: 1001
Loading /var/drweb/bases/drw43234.vdb - Ok, virus records: 554
done
<notice>exit status of (qmail psa drwebd) is (0 0 0)
<notice>start services (psa-spamassassin cron)
Loading /var/drweb/bases/drw43233.vdb - Ok, virus records: 632
Loading /var/drweb/bases/drw43232.vdb - Ok, virus records: 516
Loading /var/drweb/bases/drw43231.vdb - Ok, virus records: 466
Loading /var/drweb/bases/drw43230.vdb - Ok, virus records: 901
Loading /var/drweb/bases/drw43229.vdb - Ok, virus records: 632
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=41 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 AUTOBOOT=YES COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=30 SHLVL=2 BOOT_IMAGE=Linux splash=silent sscripts=42 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Loading /var/drweb/bases/drw43228.vdb - Ok, virus records: 584
Loading /var/drweb/bases/drw43227.vdb - Ok, virus records: 568
Starting CRON daemondone
Loading /var/drweb/bases/drw43226.vdb - Ok, virus records: 533
Loading /var/drweb/bases/drw43225.vdb - Ok, virus records: 476
Loading /var/drweb/bases/drw43224.vdb - Ok, virus records: 484
Loading /var/drweb/bases/drw43223.vdb - Ok, virus records: 442
Loading /var/drweb/bases/drw43222.vdb - Ok, virus records: 371
Loading /var/drweb/bases/drw43221.vdb - Ok, virus records: 372
Loading /var/drweb/bases/drw43220.vdb - Ok, virus records: 560
Loading /var/drweb/bases/drw43219.vdb - Ok, virus records: 412
Loading /var/drweb/bases/drw43218.vdb - Ok, virus records: 511
Loading /var/drweb/bases/drw43217.vdb - Ok, virus records: 512
Loading /var/drweb/bases/drw43216.vdb - Ok, virus records: 507
Loading /var/drweb/bases/drw43215.vdb - Ok, virus records: 539
Loading /var/drweb/bases/drw43214.vdb - Ok, virus records: 275
Loading /var/drweb/bases/drw43213.vdb - Ok, virus records: 404
Loading /var/drweb/bases/drw43212.vdb - Ok, virus records: 428
Loading /var/drweb/bases/drw43211.vdb - Ok, virus records: 494
Loading /var/drweb/bases/drw43210.vdb - Ok, virus records: 450
Loading /var/drweb/bases/drw43209.vdb - Ok, virus records: 639
Loading /var/drweb/bases/drw43208.vdb - Ok, virus records: 603
Loading /var/drweb/bases/drw43207.vdb - Ok, virus records: 620
Loading /var/drweb/bases/drw43206.vdb - Ok, virus records: 683
Loading /var/drweb/bases/drw43205.vdb - Ok, virus records: 525
Loading /var/drweb/bases/drw43204.vdb - Ok, virus records: 607
Loading /var/drweb/bases/drw43203.vdb - Ok, virus records: 409
Loading /var/drweb/bases/drw43202.vdb - Ok, virus records: 543
Starting psa-spamassassin service: done
<notice>exit status of (psa-spamassassin cron) is (0 0)
Master Resource Control: runlevel 3 has been reached
Skipped services in runlevel 3: smbfs
<notice>killproc: kill(1618,3)
<notice>killproc: kill(1617,3)
<notice>killproc: kill(1615,3)
Loading /var/drweb/bases/drwebase.vdb - Ok, virus records: 51982
Loading /var/drweb/bases/drw43201.vdb - Ok, virus records: 364
Total virus records: 74312

captaincrunch
Userprojekt
Userprojekt
Posts: 7225
Joined: 2002-10-09 14:30
Location: Dorsten

Re: Problem mit Software Raid (es löst sich auf) ?

Post by captaincrunch » 2005-05-27 09:24

Nähere Angaben und vor allem Config-Files?
DebianHowTo
echo "[q]sa[ln0=aln256%Pln256/snlbx]sb729901041524823122snlbxq"|dc

mettybirdy
Posts: 6
Joined: 2004-06-13 17:58

Re: Problem mit Software Raid (es löst sich auf) ?

Post by mettybirdy » 2005-05-27 18:57

Hi,

also ich habe zu den ungewöhnlichsten Zeitpunkten Ausfälle. z.b In der Nacht wo nix passiert. dann wiederum Mittags in Mittelzeit (traffic).

Es kann nur per Reboot reanimiert werden.


Welche Config Files benötigst du ?

Danke

mettybirdy
Posts: 6
Joined: 2004-06-13 17:58

Re: Problem mit Software Raid (es löst sich auf) ?

Post by mettybirdy » 2005-05-30 16:23

Hat keiner von euch eine Idee ??

Der Kiste schmiert alle 3 Wochen einmal total ab ! Leider immer dann wenn ich nicht sofort eingreifen kann :-(

Brauche also dringend Hilfe

franki
Posts: 60
Joined: 2005-05-31 16:23
Location: Dresden

Re: Problem mit Software Raid (es löst sich auf) ?

Post by franki » 2005-05-31 16:50

Hast Du in Deiner Logdatei als letzte Einträge vor dem Absturz

"Someone reset channel A"

stehen?