Problem spamasassin, postfix....

Postfix, QMail, Sendmail, Dovecot, Cyrus, Courier, Anti-Spam
ted72
Posts: 25
Joined: 2003-11-18 00:02

Problem spamasassin, postfix....

Post by ted72 » 2004-09-10 12:15

hallo leuts, habe ein problem, hoffe mir kann hier jemand helfen.

system: rootserver mit suse 8.1, confixx 2.0


ich kann irgendwie keine mails senden oder empfangen, ich versuche seit gestern spamasassin und avmailgate zum laufen zu bringen, aber irgendwas stimmt in der conf noch nicht...

hier mal die warn:
Sep 10 11:03:12 pXXXXXX spamc[1137]: connect() to spamd at 127.0.0.1 failed, retrying (1/3): Connection refused
Sep 10 11:03:13 pXXXXXX spamc[1137]: connect() to spamd at 127.0.0.1 failed, retrying (2/3): Connection refused
Sep 10 11:03:14 pXXXXXX spamc[1137]: connect() to spamd at 127.0.0.1 failed, retrying (3/3): Connection refused
Sep 10 11:03:15 pXXXXXX spamc[1137]: connection attempt to spamd aborted after 3 retries
Sep 10 11:03:15 pXXXXXX spamc[1140]: connect() to spamd at 127.0.0.1 failed, retrying (1/3): Connection refused
Sep 10 11:03:16 pXXXXXX spamc[1140]: connect() to spamd at 127.0.0.1 failed, retrying (2/3): Connection refused
Sep 10 11:03:17 pXXXXXX spamc[1140]: connect() to spamd at 127.0.0.1 failed, retrying (3/3): Connection refused
Sep 10 11:03:18 pXXXXXX spamc[1140]: connection attempt to spamd aborted after 3 retries
Sep 10 11:15:51 pXXXXXX postfix/smtpd[1234]: warning: database /etc/aliases.db is older than source file /etc/aliases
Sep 10 11:15:57 pXXXXXX postfix/smtpd[1236]: warning: database /etc/aliases.db is older than source file /etc/aliases
Sep 10 11:15:57 pXXXXXX postfix/local[1237]: warning: database /etc/aliases.db is older than source file /etc/aliases
Sep 10 11:15:57 pXXXXXX spamc[1240]: connect() to spamd at 127.0.0.1 failed, retrying (1/3): Connection refused
Sep 10 11:15:58 pXXXXXX spamc[1240]: connect() to spamd at 127.0.0.1 failed, retrying (2/3): Connection refused
Sep 10 11:15:59 pXXXXXX spamc[1240]: connect() to spamd at 127.0.0.1 failed, retrying (3/3): Connection refused
Sep 10 11:16:00 pXXXXXX spamc[1240]: connection attempt to spamd aborted after 3 retries
Sep 10 11:18:57 pXXXXXX postfix/smtpd[1292]: warning: database /etc/aliases.db is older than source file /etc/aliases
Sep 10 11:19:01 pXXXXXX postfix/smtpd[1300]: warning: database /etc/aliases.db is older than source file /etc/aliases
Sep 10 11:19:06 pXXXXXX postfix/smtpd[1301]: warning: database /etc/aliases.db is older than source file /etc/aliases
Sep 10 11:19:06 pXXXXXX postfix/local[1302]: warning: database /etc/aliases.db is older than source file /etc/aliases
Sep 10 11:34:14 pXXXXXX postfix/smtpd[1442]: warning: database /etc/aliases.db is older than source file /etc/aliases
Sep 10 11:34:20 pXXXXXX postfix/smtpd[1451]: warning: database /etc/aliases.db is older than source file /etc/aliases
Sep 10 11:34:21 pXXXXXX postfix/local[1452]: warning: database /etc/aliases.db is older than source file /etc/aliases
die aliases.db ist in der tat älter, da ich in der aliases die mails an root umleiten wollte und dort die weiterleitung editiert habe !!


hier die messages:
Sep 10 11:03:12 pxxxxxx antivir[1133]: AntiVir ALERT: [Worm/NetSky.X worm] /var/spool/avmailgate/incoming/df-01130-48856DFA --> .xx.pif <<<Sep 10 11:17:49 pxxxxxxx root: spamd starting
Sep 10 11:18:57 pxxxxxx PAM-warn[1292]: function=[pam_sm_authenticate] service=[smtp] terminal=[<unknown>] user=[web1p2] ruser=[<unknown>]
avmailgate scheint also zu funktionieren, aber irgendwie bleiben die mails irgendwo hängen.

var/log/mail:
Sep 10 11:34:20 pXXXXXX avgated[1446]: connection from localhost.localdomain
Sep 10 11:34:20 pXXXXXX avgated[1446]: spooled to 01446-7E5E592B
Sep 10 11:34:20 pXXXXXX avgatefwd[1447]: Message 'incoming/xf-01446-7E5E592B' scheduled for scanning now.
Sep 10 11:34:20 pXXXXXX avgatefwd[1447]: Virus Scanner will process message 'incoming/qf-01446-7E5E592B'.
Sep 10 11:34:20 pXXXXXX avgatefwd[1450]: Message 'outgoing/xf-01446-7E5E592B' scheduled for delivery now.
Sep 10 11:34:20 pXXXXXX postfix/smtp[1445]: AC790204005: to=<web1p4@pXXXXXX.pureserver.info>, relay=127.0.0.1[127.0.0.1], delay=6, statusSep 10 11:34:20 pXXXXXX postfix/smtpd[1451]: warning: database /etc/aliases.db is older than source file /etc/aliases
Sep 10 11:34:20 pXXXXXX avgated[1446]: connection to localhost.localdomain closed
Sep 10 11:34:20 pXXXXXX postfix/smtpd[1451]: connect from localhost.localdomain[127.0.0.1]
Sep 10 11:34:20 pXXXXXX postfix/smtpd[1451]: ECB9A204005: client=localhost.localdomain[127.0.0.1]
Sep 10 11:34:20 pXXXXXX postfix/cleanup[1443]: ECB9A204005: message-id=<LYRIS-277773-28348-2004.09.10-04.00.01--info#xxxxxxxxxxxxx@ftfreemaSep 10 11:34:21 pXXXXXX postfix/qmgr[503]: ECB9A204005: from=<bounce-spn-html2-277773@ftfreemail.com>, size=40491, nrcpt=1 (queue active)
Sep 10 11:34:21 pXXXXXX avgatefwd[1450]: Message 'outgoing/df-01446-7E5E592B' successfully forwarded (250 Ok: queued as ECB9A204005)
Sep 10 11:34:21 pXXXXXX postfix/smtpd[1451]: disconnect from localhost.localdomain[127.0.0.1]
Sep 10 11:34:21 pXXXXXX postfix/local[1452]: warning: database /etc/aliases.db is older than source file /etc/aliases
Sep 10 11:34:21 pXXXXXX procmail[1453]: Error while writing to "/var/log/procmail"
Sep 10 11:34:21 pXXXXXX spamd[1262]: connection from localhost.localdomain [127.0.0.1] at port 32996
Sep 10 11:34:21 pXXXXXX spamd[1456]: info: setuid to web1p4 succeeded
Sep 10 11:34:21 pXXXXXX spamd[1456]: processing message <LYRIS-277773-28348-2004.09.10-04.00.01--info#xxxxxxxxxxxxx@ftfreemail.com> for webSep 10 11:34:21 pXXXXXX spamd[1456]: identified spam (10.0/7.5) for web1p4:654 in 0.9 seconds, 39951 bytes.
Sep 10 11:34:22 pXXXXXX postfix/local[1452]: ECB9A204005: to=<web1p4@pXXXXXX.pureserver.info>, relay=local, delay=2, status=sent ("|/usr/Sep 10 11:34:51 pXXXXXX postfix/smtpd[1442]: disconnect from ftfreemail.com[69.51.13.3]
spamasassin local.cf:
# This is the right place to customize your installation of SpamAssassin.
# See 'perldoc Mail::SpamAssassin::Conf' for details of what can be
# tweaked.
#
###########################################################################
#
required_hits 7.5
rewrite_subject 0
report_header 1
use_terse_report 1
defang_mime 1
skip_rbl_checks 0
check_mx_attempts 2
check_mx_delay 5
##EOF
hier die main.cf:
# [B# Global Postfix configuration file. This file lists only a subset
# of all 100+ parameters. See the sample-xxx.cf files for a full list.
#
# The general format is lines with parameter = value pairs. Lines
# that begin with whitespace continue the previous line. A value can
# contain references to other $names or ${name}s.
#
# NOTE - CHANGE NO MORE THAN 2-3 PARAMETERS AT A TIME, AND TEST IF
# POSTFIX STILL WORKS AFTER EVERY CHANGE.

# SOFT BOUNCE
#
# The soft_bounce parameter provides a limited safety net for
# testing. When soft_bounce is enabled, mail will remain queued that
# would otherwise bounce. This parameter disables locally-generated
# bounces, and prevents the SMTP server from rejecting mail permanently
# (by changing 5xx replies into 4xx replies). However, soft_bounce
# is no cure for address rewriting mistakes or mail routing mistakes.
#
#soft_bounce = no

# LOCAL PATHNAME INFORMATION
#
# The queue_directory specifies the location of the Postfix queue.
# This is also the root directory of Postfix daemons that run chrooted.
# See the files in examples/chroot-setup for setting up Postfix chroot
# environments on different UNIX systems.
#
queue_directory = /var/spool/postfix

# The command_directory parameter specifies the location of all
# postXXX commands. The default value is $program_directory.
#
command_directory = /usr/sbin

# The daemon_directory parameter specifies the location of all Postfix
# daemon programs (i.e. programs listed in the master.cf file). The
# default value is $program_directory. This directory must be owned
# by root.
#
daemon_directory = /usr/lib/postfix
# QUEUE AND PROCESS OWNERSHIP
#
# The mail_owner parameter specifies the owner of the Postfix queue
# and of most Postfix daemon processes. Specify the name of a user
# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
# USER.
#
mail_owner = postfix

# The default_privs parameter specifies the default rights used by
# the local delivery agent for delivery to external file or command.
# These rights are used in the absence of a recipient user context.
# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
#
#default_privs = nobody
default_privs = autoresp

# INTERNET HOST AND DOMAIN NAMES
#
# The myhostname parameter specifies the internet hostname of this
# mail system. The default is to use the fully-qualified domain name
# from gethostname(). $myhostname is used as a default value for many
# other configuration parameters.
#
#
#mydomain = domain.tld
mydomain = ########

# SENDING MAIL
#
# The myorigin parameter specifies the domain that locally-posted
# mail appears to come from. The default is to append $myhostname,
# which is fine for small sites. If you run a domain with multiple
# machines, you should (1) change this to $mydomain and (2) set up
# a domain-wide alias database that aliases each user to
# user@that.users.mailhost.
#
#myorigin = $myhostname
#myorigin = $mydomain

# RECEIVING MAIL

# The inet_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on. By default,
# the software claims all active interfaces on the machine. The
# parameter also controls delivery of mail to user@[ip.address].
#
inet_interfaces = all
#inet_interfaces = $myhostname
#inet_interfaces = $myhostname, localhost

# The mydestination parameter specifies the list of domains that this
# machine considers itself the final destination for. That includes
# Sendmail-style virtual domains hosted on this machine.
#
# Do not include Postfix-style virtual domains - those domains are
# specified elsewhere (see sample-virtual.cf, and sample-transport.cf).
#
# The default is $myhostname + localhost.$mydomain. On a mail domain
# gateway, you should also include $mydomain. Do not specify the
# names of domains that this machine is backup MX host for. Specify
# those names via the relay_domains or permit_mx_backup settings for
# the SMTP server (see sample-smtpd.cf).
#myhostname = host.domain.tld
#myhostname = virtual.domain.tld
myhostname = pxxxxxx.pureserver.info

# The mydomain parameter specifies the local internet domain name.
# The default is to use $myhostname minus the first component.
# $mydomain is used as a default value for many other configuration
# parameters.
#
# The local machine is always the final destination for mail addressed
# to user@[the.net.work.address] of an interface that the mail system
# receives mail on (see the inet_interfaces parameter).
#
# Specify a list of host or domain names, /file/name or type:table
# patterns, separated by commas and/or whitespace. A /file/name
# pattern is replaced by its contents; a type:table is matched when
# a name matches a lookup key. Continue long lines by starting the
# next line with whitespace.
#
#mydestination = $myhostname, localhost.$mydomain
#mydestination = $myhostname, localhost.$mydomain $mydomain
#mydestination = $myhostname, localhost.$mydomain, $mydomain,
# mail.$mydomain, http://www.$mydomain, ftp.$mydomain
mydestination = $myhostname, localhost.$mydomain, $mydomain, smtp.$mydomain

# TRUST AND RELAY CONTROL

# The mynetworks parameter specifies the list of "trusted" SMTP
# clients that have more privileges than "strangers".
#
# In particular, "trusted" SMTP clients are allowed to relay mail
# through Postfix. See the smtpd_recipient_restrictions parameter
# in file sample-smtpd.cf.
#
# You can specify the list of "trusted" network addresses by hand
# or you can let Postfix do it for you (which is the default).
#
# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
# clients in the same IP subnetworks as the local machine.
# On Linux, this does works correctly only with interfaces specified
# with the "ifconfig" command.
#
# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
# clients in the same IP class A/B/C networks as the local machine.
# Don't do this with a dialup site - it would cause Postfix to "trust"
# your entire provider's network. Instead, specify an explicit
# mynetworks list by hand, as described below.
#
# Specify "mynetworks_style = host" when Postfix should "trust"
# only the local machine.
#
#mynetworks_style = class
#mynetworks_style = subnet
mynetworks_style = host

# Alternatively, you can specify the mynetworks list by hand, in
# which case Postfix ignores the mynetworks_style setting.
#
# Specify an explicit list of network/netmask patterns, where the
# mask specifies the number of bits in the network part of a host
# address.
#
# You can also specify the absolute pathname of a pattern file instead
# of listing the patterns here. Specify type:table for table-based lookups
# (the value on the table right-hand side is not used).
#
#mynetworks = 168.100.189.0/28, 127.0.0.0/8
#mynetworks = $config_directory/mynetworks
#mynetworks = hash:/etc/postfix/network_table

# The relay_domains parameter restricts what clients this mail system
# will relay mail from, or what destinations this system will relay
# mail to. See the smtpd_recipient_restrictions restriction in the
# file sample-smtpd.cf for detailed information.
#
# By default, Postfix relays mail
# - from "trusted" clients whose IP address matches $mynetworks,
# - from "trusted" clients matching $relay_domains or subdomains thereof,
# - from untrusted clients to destinations that match $relay_domains
# or subdomains thereof, except addresses with sender-specified routing.
# The default relay_domains value is $mydestination.
#
# In addition to the above, the Postfix SMTP server by default accepts mail
# that Postfix is final destination for:
# - destinations that match $inet_interfaces,
# - destinations that match $mydestination
# - destinations that match $virtual_maps.
# These destinations do not need to be listed in $relay_domains.
#
# Specify a list of hosts or domains, /file/name patterns or type:name
# lookup tables, separated by commas and/or whitespace. Continue
# long lines by starting the next line with whitespace. A file name
# is replaced by its contents; a type:name table is matched when a
# (parent) domain appears as lookup key.
#
# NOTE: Postfix will not automatically forward mail for domains that
# list this system as their primary or backup MX host. See the
# permit_mx_backup restriction in the file sample-smtpd.cf.
#
#relay_domains = $mydestination

# INTERNET OR INTRANET

# The relayhost parameter specifies the default host to send mail to
# when no entry is matched in the optional transport(5) table. When
# no relayhost is given, mail is routed directly to the destination.
#
# On an intranet, specify the organizational domain name. If your
# internal DNS uses no MX records, specify the name of the intranet
# gateway host instead.
#
# In the case of SMTP, specify a domain, host, host:port, [host]:port,
# [address] or [address]:port; the form [host] turns off MX lookups.
#
# If you're connected via UUCP, see also the default_transport parameter.
#
#relayhost = $mydomain
#relayhost = gateway.my.domain
#relayhost = uucphost
#relayhost = [an.ip.add.ress]

# REJECTING UNKNOWN LOCAL USERS
#
# The local_recipient_maps parameter specifies optional lookup tables
# with all names (not addresses) of users that are local with respect
# to $mydestination and $inet_interfaces. If this parameter is
# defined, then the SMTP server will reject mail for unknown local
# users.
# If you use the default Postfix local delivery agent for local
# delivery, uncomment the definition below.
#
# Beware: if the Postfix SMTP server runs chrooted, you may have to
# copy the passwd (not shadow) database into the jail. This is
# system dependent.
#
local_recipient_maps = $alias_maps unix:passwd.byname

# INPUT RATE CONTROL
#
# The in_flow_delay configuration parameter implements mail input
# flow control. This feature is turned on by default, although it
# still needs further development (it's disabled on SCO UNIX due
# to an SCO bug).
#
# A Postfix process will pause for $in_flow_delay seconds before
# accepting a new message, when the message arrival rate exceeds the
# message delivery rate. With the default 50 SMTP server process
# limit, this limits the mail inflow to 50 messages a second more
# than the number of messages delivered per second.
#
# Specify 0 to disable the feature. Valid delays are 0..10.
#
#in_flow_delay = 1s
in_flow_delay = 0

# ADDRESS REWRITING
#
# Insert text from sample-rewrite.cf if you need to do address
# masquerading.
#
# Insert text from sample-canonical.cf if you need to do address
# rewriting, or if you need username->Firstname.Lastname mapping.

# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
#
# Insert text from sample-virtual.cf if you need virtual domain support.

# "USER HAS MOVED" BOUNCE MESSAGES
#
# Insert text from sample-relocated.cf if you need "user has moved"
# style bounce messages. Alternatively, you can bounce recipients
# with an SMTP server access table. See sample-smtpd.cf.

# TRANSPORT MAP
#
# Insert text from sample-transport.cf if you need explicit routing.

# ALIAS DATABASE
#
# The alias_maps parameter specifies the list of alias databases used
# by the local delivery agent. The default list is system dependent.
# On systems with NIS, the default is to search the local alias
# database, then the NIS alias database. See aliases(5) for syntax
# details.
#
# If you change the alias database, run "postalias /etc/aliases" (or
# wherever your system stores the mail alias file), or simply run
# "newaliases" to build the necessary DBM or DB file.
#
# It will take a minute or so before changes become visible. Use
# "postfix reload" to eliminate the delay.
#
#alias_maps = dbm:/etc/aliases
#alias_maps = hash:/etc/aliases
#alias_maps = hash:/etc/aliases, nis:mail.aliases
#alias_maps = netinfo:/aliases
alias_maps = hash:/etc/aliases

# The alias_database parameter specifies the alias database(s) that
# are built with "newaliases" or "sendmail -bi". This is a separate
# configuration parameter, because alias_maps (see above) may specify
# tables that are not necessarily all under control by Postfix.
#
#alias_database = dbm:/etc/aliases
#alias_database = dbm:/etc/mail/aliases
#alias_database = hash:/etc/aliases
#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
alias_database = hash:/etc/aliases

# ADDRESS EXTENSIONS (e.g., user+foo)
#
# The recipient_delimiter parameter specifies the separator between
# user names and address extensions (user+foo). See canonical(5),
# local(8), relocated(5) and virtual(5) for the effects this has on
# aliases, canonical, virtual, relocated and .forward file lookups.
# Basically, the software tries user+foo and .forward+foo before
# trying user and .forward.
#
#recipient_delimiter = +

# DELIVERY TO MAILBOX
#
# The home_mailbox parameter specifies the optional pathname of a
# mailbox file relative to a user's home directory. The default
# mailbox file is /var/spool/mail/user or /var/mail/user. Specify
# "Maildir/" for qmail-style delivery (the / is required).
#
#home_mailbox = Mailbox
#home_mailbox = Maildir/

# The mail_spool_directory parameter specifies the directory where
# UNIX-style mailboxes are kept. The default setting depends on the
# system type.
#
#mail_spool_directory = /var/mail
#mail_spool_directory = /var/spool/mail
mail_spool_directory = /var/mail

# The mailbox_command parameter specifies the optional external
# command to use instead of mailbox delivery. The command is run as
# the recipient with proper HOME, SHELL and LOGNAME environment settings.
# Exception: delivery for root is done as $default_user.
#
# Other environment variables of interest: USER (recipient username),
# EXTENSION (address extension), DOMAIN (domain part of address),
# and LOCAL (the address localpart).
#
# Unlike other Postfix configuration parameters, the mailbox_command
# parameter is not subjected to $parameter substitutions. This is to
# make it easier to specify shell syntax (see example below).
#
# Avoid shell meta characters because they will force Postfix to run
# an expensive shell process. Procmail alone is expensive enough.
#
# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
#
mailbox_command = /usr/bin/procmail -a "$EXTENSION"
#mailbox_command = /some/where/procmail -a "$EXTENSION"

# The mailbox_transport specifies the optional transport in master.cf
# to use after processing aliases and .forward files. This parameter
# has precedence over the mailbox_command, fallback_transport and
# luser_relay parameters.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf. The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
#mailbox_transport = lmtp:unix:/file/name
#mailbox_transport = cyrus

# The fallback_transport specifies the optional transport in master.cf
# to use for recipients that are not found in the UNIX passwd database.
# This parameter has precedence over the luser_relay parameter.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf. The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
#fallback_transport = lmtp:unix:/file/name
#fallback_transport = cyrus
#fallback_transport =

# The luser_relay parameter specifies an optional destination address
# for unknown recipients. By default, mail for unknown local recipients
# is bounced.
#
# The following expansions are done on luser_relay: $user (recipient
# username), $shell (recipient shell), $home (recipient home directory),
# $recipient (full recipient address), $extension (recipient address
# extension), $domain (recipient domain), $local (entire recipient
# localpart), $recipient_delimiter. Specify ${name?value} or
# ${name:value} to expand value only when $name does (does not) exist.
#
# luser_relay works only for the default Postfix local delivery agent.
#
#luser_relay = $user@other.host
#luser_relay = $local@other.host
#luser_relay = admin+$local

# JUNK MAIL CONTROLS
#
# The controls listed here are only a very small subset. See the file
# sample-smtpd.cf for an elaborate list of anti-UCE controls.

# The header_checks parameter specifies an optional table with patterns
# that each logical message header is matched against, including
# headers that span multiple physical lines. Patterns are matched
# in the specified order, and the search stops upon the first match.
# When a pattern matches, what happens next depends on the associated
# action that is specified in the right-hand side of the table:
#
# REJECT the entire message is rejected.
# REJECT text.... The text is sent to the originator.
# IGNORE the header line is silently discarded.
# WARN the header is logged (not rejected) with a warning message.
# WARN text... as above, and the text is logged, too.
#
# These patterns do not apply to MIME headers in the message body.
#
# See also the body_checks example in the sample-filter.cf file.
#
#header_checks = regexp:/etc/postfix/header_checks

# FAST ETRN SERVICE
#
# Postfix maintains per-destination logfiles with information about
# deferred mail, so that mail can be flushed quickly with the SMTP
# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
#
# By default, Postfix maintains deferred mail logfile information
# only for destinations that Postfix is willing to relay to (as
# specified in the relay_domains parameter). For other destinations,
# Postfix attempts to deliver ALL queued mail after receiving the
# SMTP "ETRN domain.tld" command, or after execution of "sendmail
# -qRdomain.tld". This can be slow when a lot of mail is queued.
#
# The fast_flush_domains parameter controls what destinations are
# eligible for this "fast ETRN/sendmail -qR" service.
#
#fast_flush_domains = $relay_domains
#fast_flush_domains =
fast_flush_domains = $relay_domains

# SHOW SOFTWARE VERSION OR NOT
#
# The smtpd_banner parameter specifies the text that follows the 220
# code in the SMTP server's greeting banner. Some people like to see
# the mail version advertised. By default, Postfix shows no version.
#
# You MUST specify $myhostname at the start of the text. That is an
# RFC requirement. Postfix itself does not care.
#
#smtpd_banner = $myhostname ESMTP $mail_name
#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
smtpd_banner = $myhostname ESMTP $mail_name

# PARALLEL DELIVERY TO THE SAME DESTINATION
#
# How many parallel deliveries to the same user or domain? With local
# delivery, it does not make sense to do massively parallel delivery
# to the same user, because mailbox updates must happen sequentially,
# and expensive pipelines in .forward files can cause disasters when
# too many are run at the same time. With SMTP deliveries, 10
# simultaneous connections to the same domain could be sufficient to
# raise eyebrows.
#
# Each message delivery transport has its XXX_destination_concurrency_limit
# parameter. The default is $default_destination_concurrency_limit for
# most delivery transports. For the local delivery agent the default is 2.

#local_destination_concurrency_limit = 2
#default_destination_concurrency_limit = 10

# DEBUGGING CONTROL
#
# The debug_peer_level parameter specifies the increment in verbose
# logging level when an SMTP client or server host name or address
# matches a pattern in the debug_peer_list parameter.
#
debug_peer_level = 2

# The debug_peer_list parameter specifies an optional list of domain
# or network patterns, /file/name patterns or type:name tables. When
# an SMTP client or server host name or address matches a pattern,
# increase the verbose logging level by the amount specified in the
# debug_peer_level parameter.
#
#debug_peer_list = 127.0.0.1
#debug_peer_list = some.domain

# The debugger_command specifies the external command that is executed
# when a Postfix daemon program is run with the -D option.
#
# Use "command .. & sleep 5" so that the debugger can attach before
# the process marches on. If you use an X-based debugger, be sure to
# set up your XAUTHORITY environment variable before starting Postfix.
#
debugger_command =
PATH=/usr/bin:/usr/X11R6/bin
xxgdb $daemon_directory/$process_name $process_id & sleep 5

# INSTALL-TIME CONFIGURATION INFORMATION
#
# The following parameters are used when installing a new Postfix version.
#
# sendmail_path: The full pathname of the Postfix sendmail command.
# This is the Sendmail-compatible mail posting interface.
#
sendmail_path = /usr/sbin/sendmail

# newaliases_path: The full pathname of the Postfix newaliases command.
# This is the Sendmail-compatible command to build alias databases.
#
newaliases_path = /usr/bin/newaliases

# mailq_path: The full pathname of the Postfix mailq command. This
# is the Sendmail-compatible mail queue listing command.
#
mailq_path = /usr/bin/mailq

# setgid_group: The group for mail submission and queue management
# commands. This must be a group name with a numerical group ID that
# is not shared with other accounts, not even with the Postfix account.
#
setgid_group = maildrop

# manpage_directory: The location of the Postfix on-line manual pages.
#
manpage_directory = /usr/share/man

# sample_directory: The location of the Postfix sample configuration files.
#
sample_directory = /usr/share/doc/packages/postfix/samples

# readme_directory: The location of the Postfix README files.
#
readme_directory = /usr/share/doc/packages/postfix/README_FILES

#suseconfig:
canonical_maps = hash:/etc/postfix/canonical
virtual_maps = hash:/etc/postfix/virtual, hash:/etc/postfix/confixx_virtualUsers, hash:/etc/postfix/confixx_localDomains
relocated_maps = hash:/etc/postfix/relocated
transport_maps = hash:/etc/postfix/transport
sender_canonical_maps = hash:/etc/postfix/sender_canonical
masquerade_exceptions = root
masquerade_classes = envelope_sender, header_sender, header_recipient
inet_interfaces = all
masquerade_domains = xxxxxxxx
smtpd_sender_restrictions = hash:/etc/postfix/access
smtpd_client_restrictions =
strict_rfc821_envelopes = no
#smtpd_recipient_restrictions = permit_mynetworks,check_relay_domains
maps_rbl_domains = relays.ordb.org
smtpd_recipient_restrictions = permit_sasl_authenticated, reject_unauth_destination, reject_maps_rbl
#SMTPD Auth
smtpd_sasl_auth_enable = yes
smtpd_sasl_security_options = noanonymous
broken_sasl_auth_clients = yes

#TLS Support
smtpd_use_tls = yes
#smtpd_tls_auth_only = yes
smtpd_tls_key_file = /etc/postfix/key.pem
smtpd_tls_cert_file = /etc/postfix/cert.pem
smtpd_tls_CAfile = /etc/postfix/cacert.pem
smtpd_tls_loglevel = 1
smtpd_tls_received_header = yes
smtpd_tls_session_cache_timeout = 3600s
tls_random_source = dev:/dev/urandom

# antivir mailgate
#contentfilter email_antivir
content_filter = smtp:127.0.0.1:10024
master.cf:
#
# Postfix master process configuration file. Each line describes how
# a mailer component program should be run. The fields that make up
# each line are described below. A "-" field value requests that a
# default value be used for that field.
#
# Service: any name that is valid for the specified transport type
# (the next field). With INET transports, a service is specified as
# host:port. The host part (and colon) may be omitted. Either host
# or port may be given in symbolic form or in numeric form. Examples
# for the SMTP server: localhost:smtp receives mail via the loopback
# interface only; 10025 receives mail on port 10025.
#
# Transport type: "inet" for Internet sockets, "unix" for UNIX-domain
# sockets, "fifo" for named pipes.
#
# Private: whether or not access is restricted to the mail system.
# Default is private service. Internet (inet) sockets can't be private.
#
# Unprivileged: whether the service runs with root privileges or as
# the owner of the Postfix system (the owner name is controlled by the
# mail_owner configuration variable in the main.cf file).
#
# Chroot: whether or not the service runs chrooted to the mail queue
# directory (pathname is controlled by the queue_directory configuration
# variable in the main.cf file). Presently, all Postfix daemons can run
# chrooted, except for the pipe, virtual and local delivery daemons.
# The files in the examples/chroot-setup subdirectory describe how
# to set up a Postfix chroot environment for your type of machine.
#
# Wakeup time: automatically wake up the named service after the
# specified number of seconds. A ? at the end of the wakeup time
# field requests that wake up events be sent only to services that
# are actually being used. Specify 0 for no wakeup. Presently, only
# the pickup, queue manager and flush daemons need a wakeup timer.
#
# Max procs: the maximum number of processes that may execute this
# service simultaneously. Default is to use a globally configurable
# limit (the default_process_limit configuration parameter in main.cf).
# Specify 0 for no process count limit.
#
# Command + args: the command to be executed. The command name is
# relative to the Postfix program directory (pathname is controlled by
# the program_directory configuration variable). Adding one or more
# -v options turns on verbose logging for that service; adding a -D
# option enables symbolic debugging (see the debugger_command variable
# in the main.cf configuration file). See individual command man pages
# for specific command-line options, if any.
#
# In order to use the "uucp" message tranport below, set up entries
# in the transport table.
#
# In order to use the "cyrus" message transport below, configure it
# in main.cf as the mailbox_transport.
#
# SPECIFY ONLY PROGRAMS THAT ARE WRITTEN TO RUN AS POSTFIX DAEMONS.
# ALL DAEMONS SPECIFIED HERE MUST SPEAK A POSTFIX-INTERNAL PROTOCOL.
#
# DO NOT CHANGE THE ZERO PROCESS LIMIT FOR CLEANUP/BOUNCE/DEFER OR
# POSTFIX WILL BECOME STUCK UP UNDER HEAVY LOAD
#
# DO NOT CHANGE THE ONE PROCESS LIMIT FOR PICKUP/QMGR OR POSTFIX WILL
# DELIVER MAIL MULTIPLE TIMES.
#
# DO NOT SHARE THE POSTFIX QUEUE BETWEEN MULTIPLE POSTFIX INSTANCES.
#
# ==========================================================================
# service type private unpriv chroot wakeup maxproc command + args
# (yes) (yes) (yes) (never) (50)
# ==========================================================================
smtp inet n - n - - smtpd
smtps inet n - n - - smtpd
-o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes
#submission inet n - n - - smtpd
# -o smtpd_enforce_tls=yes -o smtpd_sasl_auth_enable=yes
#628 inet n - n - - qmqpd
pickup fifo n - n 60 1 pickup
cleanup unix n - n - 0 cleanup
qmgr fifo n - n 300 1 qmgr
#qmgr fifo n - n 300 1 nqmgr
#tlsmgr fifo - - n 300 1 tlsmgr
rewrite unix - - n - - trivial-rewrite
bounce unix - - n - 0 bounce
defer unix - - n - 0 bounce
flush unix n - n 1000? 0 flush
smtp unix - - n - - smtp
showq unix n - n - - showq
error unix - - n - - error
local unix - n n - - local
virtual unix - n n - - virtual
lmtp unix - - n - - lmtp
#for antivir maildaemon
localhost:smtp-backdoor inet n - n - - smtpd -o content_filter=
#
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
# The Cyrus deliver program has changed incompatibly.
#
cyrus unix - n n - - pipe
flags=R user=cyrus argv=/usr/lib/cyrus/bin/deliver -e -m ${extension} ${user}
uucp unix - n n - - pipe
flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
ifmail unix - n n - - pipe
flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp unix - n n - - pipe
flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient
vscan unix - n n - 10 pipe
user=vscan argv=/usr/sbin/amavis ${sender} ${recipient}
procmail unix - n n - - pipe
flags=R user=nobody argv=/usr/bin/procmail -t -m USER =${user} EXTENSION=${extension} /etc/procmailrc


ich hoffe das ihr da was seht, bin mit meinem latein erstmal am ende... thx

captaincrunch
Userprojekt
Userprojekt
Posts: 7225
Joined: 2002-10-09 14:30
Location: Dorsten

Re: Problem spamasassin, postfix....

Post by captaincrunch » 2004-09-10 12:29

connect() to spamd at 127.0.0.1 failed, retrying (1/3): Connection refused
DebianHowTo
echo "[q]sa[ln0=aln256%Pln256/snlbx]sb729901041524823122snlbxq"|dc

ted72
Posts: 25
Joined: 2003-11-18 00:02

Re: Problem spamasassin, postfix....

Post by ted72 » 2004-09-10 12:33

okay... die fehlermeldung habe ich auch schon entdeckt, spamd läuft aber ?!

chris76
Moderator
Moderator
Posts: 2015
Joined: 2003-06-27 14:37
Location: Germering

Re: Problem spamasassin, postfix....

Post by chris76 » 2004-09-10 12:34

Falls du dann das Problem, worauf dich CaptainCrunch schon aufmerkasm gemacht hast, beseitigt ist, stelle noch folgendes sicher.

der avgated läuft, da deine Mails gescannt werden. Allerdings muß auch der avgatefwd laufen um die mails aus der avqeue wieder rauszubringen. Das erledigt normalerweise das Startscript von avgate, aber damit hatte ich auch mal meine Problemchen.
Gruß Christian

BofH excuses: YOU HAVE AN I/O ERROR -> Incompetent Operator error

captaincrunch
Userprojekt
Userprojekt
Posts: 7225
Joined: 2002-10-09 14:30
Location: Dorsten

Re: Problem spamasassin, postfix....

Post by captaincrunch » 2004-09-10 12:57

spamd läuft aber
Dass er läuft heißt noch lange nicht, dass er auch Connections entgegennimmt.
DebianHowTo
echo "[q]sa[ln0=aln256%Pln256/snlbx]sb729901041524823122snlbxq"|dc

ted72
Posts: 25
Joined: 2003-11-18 00:02

Re: Problem spamasassin, postfix....

Post by ted72 » 2004-09-10 13:00

okay, wie checke ich beides ? das mit der aliases.db nervt auch...

Roger Wilco
Administrator
Administrator
Posts: 6001
Joined: 2004-05-23 12:53

Re: Problem spamasassin, postfix....

Post by Roger Wilco » 2004-09-10 13:36

ted72 wrote:okay, wie checke ich beides ?
Probier mal eine Verbindung zu spamd mit einem Client wie telnet oder netcat aufzubauen. Ausserdem sollte 'netstat -tulpen' den spamd aufführen.
das mit der aliases.db nervt auch...
man postmap

ryukia
Posts: 58
Joined: 2004-07-16 14:40
Location: Karlsruhe

Re: Problem spamasassin, postfix....

Post by ryukia » 2004-09-10 13:46

Roger Wilco wrote:
das mit der aliases.db nervt auch...
man postmap
Postmap hat mit Alias-Files nix am Hut und würde nur meckern. Dafür gibt es postalias...

Das steht übrigens alles auch schon oben im Configfile:
# If you change the alias database, run "postalias /etc/aliases" (or
# wherever your system stores the mail alias file), or simply run
# "newaliases" to build the necessary DBM or DB file.
Ciao
Ryukia

ted72
Posts: 25
Joined: 2003-11-18 00:02

Re: Problem spamasassin, postfix....

Post by ted72 » 2004-09-10 14:18

okay, das mit den aliases scheint zu funktioneren, thx ryukia


netstat bringt folgendes:
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name
tcp 0 0 127.0.0.1:10024 0.0.0.0:* LISTEN 0 438 219/avgated
tcp 0 0 127.0.0.1:10025 0.0.0.0:* LISTEN 0 2239 485/master
tcp 0 0 0.0.0.0:110 0.0.0.0:* LISTEN 0 3487 536/xinetd
tcp 0 0 127.0.0.1:783 0.0.0.0:* LISTEN 0 47977 3038/perl
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 1827 430/portmap
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 0 7378 835/httpd
tcp 0 0 0.0.0.0:465 0.0.0.0:* LISTEN 0 2180 485/master
tcp 0 0 0.0.0.0:21 0.0.0.0:* LISTEN 0 3486 536/xinetd
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 1932 441/sshd
tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN 0 2177 485/master
tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 0 7377 835/httpd
udp 65512 0 0.0.0.0:68 0.0.0.0:* 0 676 343/dhcpcd
udp 0 0 0.0.0.0:111 0.0.0.0:* 0 1725 430/portmap
udp 0 0 xxx.xxx.xxx.xxx:123 0.0.0.0:* 0 3041 518/ntpd
udp 0 0 127.0.0.1:123 0.0.0.0:* 0 3040 518/ntpd
udp 0 0 0.0.0.0:123 0.0.0.0:* 0 3039 518/ntpd
führt also nichts auf... verstehe ich nicht wirklich... rcspamd -status bringt mir aber running... habe auch schon nen restart gemacht
:?

Roger Wilco
Administrator
Administrator
Posts: 6001
Joined: 2004-05-23 12:53

Re: Problem spamasassin, postfix....

Post by Roger Wilco » 2004-09-10 18:13

Ryukia wrote:
Roger Wilco wrote:
das mit der aliases.db nervt auch...
man postmap
Postmap hat mit Alias-Files nix am Hut und würde nur meckern. Dafür gibt es postalias...
Pfff, mein ich doch. Ihr sollt das machen, was ich denke, nicht das was ich schreibe ;)

Aber danke fürs richtigstellen.

ted72
Posts: 25
Joined: 2003-11-18 00:02

Re: Problem spamasassin, postfix....

Post by ted72 » 2004-09-13 13:06

so wie es ausschaut läuft es jetzt...

thx für eure hilfe