Fehler in Spamassassin

Postfix, QMail, Sendmail, Dovecot, Cyrus, Courier, Anti-Spam
derpalit
Posts: 16
Joined: 2004-05-05 19:57

Fehler in Spamassassin

Post by derpalit » 2004-07-14 01:58

Hallo,

nach mehreren erfolglosen Versuchen meinen Spamassassin-Filter in Gang zu bekommen, wende ich mich jetzt an euch.

Ich hoffe, dass Ihr mir helfen könnt!

Zum Problem:

Sobald eine Spam E-Mail ankommt, wird diese gefiltert. Spamassassin schreibt den Header um und nimmt die eigentliche E-Mail zu den Anhängen.

Das Problem ist, dass ich diese vorgehensweise nicht will und bei einigen E-Mail-Adressen über Confixx Webmail auch andere Optionen eingestellt habe.

Das Problem berücksichtigt diese Einstellungen nicht. Egal welche Optionen man ändern, dass Programm läuft nur im Standard-Modus.

Hier die local.cf

Code: Select all

################### CONFIXX SPAMASSASSIN CONFIG FILE #####################
# created at Wed Jul 14 00:49:01 2004
#
#            !!! Do not make any changes in this file !!!
# All your changes will be lost after the file is auto updated next time.
#
#       If you want to add here any custom directive, you should include it
#       to '/root/confixx/safe/spamassassin.inc' file. Its content will be automatically
#   included here during the file is autoupdated.
##########################################################################

# START CUSTOM INCLUSION (see /root/confixx/safe/spamassassin.inc)

# SpamAssassin config file for version 2.5x
# generated by http://www.yrex.com/spam/spamconfig.php (version 1.01)

# How many hits before a message is considered spam.
required_hits           5.0

# Whether to change the subject of suspected spam
rewrite_subject         1

# Text to prepend to subject if rewrite_subject is used
subject_tag             SPAM:

# Encapsulate spam in an attachment
report_safe             0

# Use terse version of the spam report
use_terse_report        1

# Enable the Bayes system
use_bayes               1

# Enable Bayes auto-learning
auto_learn              1

# Enable or disable network checks
skip_rbl_checks         0
use_razor2              1
use_dcc                 1
use_pyzor               1

# Mail using languages used in these country codes will not be marked
# as being possibly spam in a foreign language.
ok_languages            all

# Mail using locales used in these country codes will not be marked
# as being possibly spam in a foreign language.
ok_locales              all


# END OF CUSTOM INCLUSION

# START CONFIXX GENERATED SECTION


###

user_scores_dsn                 DBI:mysql:confixxdb:localhost;mysql_socket=/var/lib/mysql/mysql.sock
user_scores_sql_username        confixxuser
user_scores_sql_password        muss nicht jeder wissen *ggg*
user_scores_sql_table           spampref

# END OF CONFIXX GENERATED SECTION
In der local.cf konnte ich keine Fehler feststellen. Auch die MySQL-Datenbank existiert und die jeweiligen User-Einstellungen in der Datenbank sind vorhanden.

Hier die confixx_main.conf

Code: Select all

#### CONFIXX MAIN CONFIGFILE ####
#### created Wed Jul 14 00:32:57 2004 ###

## general

# e.g. Linux, FreeBSD
$OSTYPE = 'Linux';

# Confixx Version
$version = '3.0.2';

# location of webusers homedirs
$user_homeDir = '/home/htdocs';

# directory where Confixx is installed
$installDir = '/root/confixx';

# users with shell access get this shell
$stdShell = '/bin/bash';

# group of Confixx webusers
$userGroup = 'ftponly';

# group of Confixx mailusers
$popGroup = 'poponly';

# uid of userGroup
$giduser = '102';

# uid of popGroup
$gidpop = '103';

# location of passwd file
$passwdDir = '/etc/passwd';

# location of shadow file
$shadowDir = '/etc/shadow';

# location of group file
$groupDir = '/etc/group';

# lowest uid for users created with Confixx
$min_uid = '772';

# highest uid for users created with Confixx
$max_uid = '65000';

# local hostname
$hostname = 'pXXX.pureserver.info';

# location of pidfiles for Confixx programs
$PIDDir = '/root/confixx/run';

# prefix for all Confixx users
$user_prefix = 'c1234';

# language for all shell based Confixx applications
$language = 'de';

# compatible languagefiles need to be greater or equals
$langfileversion = '3.0.2';

# files used for DirectoryIndex if WAP is activated (seperated by :)
$index_wap = '';

# files used for DirectoryIndex if PHP is activated (seperated by :)
$index_php = '';

# files used for DirectoryIndex if SSI is activated (seperated by :)
$index_ssi = '';

# files used for DirectoryIndex (seperated by :)
$index_html = '';

# show mail traffic in webinterface
$show_emailtransfer = '0';

# max number of possible email recipients in webinterface
$max_emailrcpts = '10';

# disable usage of md5 for passwords
$disable_md5 = '0';

# compatibility for Virtuozzo (default is 0)
$virtuozzo = '0';

# create /home/www/web1/./ passwd entries (e.g. ssh-chroot)
$dot_passwd = '0';


## process management

# pm_*_reload: full command to be used to reload daemon, if empty Confixx uses signals
# pm_*_start: full command to be used to stard daemon, if not running _after_ reload
# pm_*_user: username of process (used for finding process to send signal)
# pm_*_name: name of process (used for finding process to send signal)

$pm_apache_reload = '/etc/init.d/apache2 reload';
$pm_apache_start = '/etc/init.d/apache2 start';
$pm_apache_user = '';
$pm_apache_name = '';
$pm_mail_reload = '';
$pm_mail_start = '';
$pm_mail_user = '';
$pm_mail_name = '';
$pm_bind_reload = '/etc/init.d/named reload';
$pm_bind_start = '/etc/init.d/named start';
$pm_bind_user = '';
$pm_bind_name = '';
$pm_spamassassin_reload = '/etc/init.d/spamd restart';
$pm_spamassassin_start = '/etc/init.d/spamd start';
$pm_spamassassin_user = '';
$pm_spamassassin_name = '';
$pm_ftpd_noscript = '';
$pm_ftpd_reload = '';
$pm_ftpd_start = '';

## apache

# group used by Apache (Group in httpd.conf!)
$apacheGroup = 'www';

# rotate logfile if greater than value (kb) after analysis
$apacheBackupSize = '10240';

# day on which logfiles will be rotated, ignoring size on this day (0=Sun, set to 8 to disable)
$apacheBackupDay = '1';

# 1: rotate logfiles in user's homedir, 0: rotate to $apacheBackupDir
$apacheBackupLocal = '1';

# keep _old_ logfiles for X days
$apacheBackupExpire = '90';

# location where to keep rotated logfiles (if not user's homedir)
$apacheBackupDir = '/var/log/apache2/old';

# location of general Apache logfiles for Confixx and symlinks to user's logfiles
$apacheLogDir = '/var/log/apache2/confixx';

# value used as <IfDefine value> for ssl entries in confixx_vhost.conf, defaults to SSL
$apacheDefSSL = 'SSL';

# Confixx web pages user's homedir
$confixx_homeDir = '/srv/www/confixx';

# location of Confixx web pages
$confixx_htmlDir = '/srv/www/confixx/html';

# location of Confixx web cgis
$confixx_cgiDir = '/srv/www/confixx/html/cgi-bin';

# location of Confixx web pages temporary dir (e.g. php upload)
$confixx_tmpDir = '/srv/www/confixx/tmp';

# location of Confixx web pages bin dir
$confixx_binDir = '/srv/www/confixx/bin';

# location of Confixx web pages sbin dir
$confixx_sbinDir = '/srv/www/confixx/sbin';

# location of Apache's httpd.conf
$httpd_conf = '/etc/apache2/httpd.conf';

# location of Confixx vhosts file for Apache (included by mhost.conf)
$vhost_conf = '/etc/apache2/confixx_vhost.conf';

# location of Confixx main Apache config file (included by httpd.conf)
$mhost_conf = '/etc/apache2/confixx_mhost.conf';

# uid of $apacheGroup
$gidapache = '8';

# uid of Confixx web pages user
$confixx_uid = '768';

# gid of Confixx web pages user
$confixx_gid = '501';

# name of Confixx web pages user
$confixx_user = 'confixx';

# group of Confixx web pages user
$confixx_group = 'confixx';

# location of ssl .key files
$sslKeyDir = '/etc/httpd/ssl.key';

# location of ssl .crt files
$sslCrtDir = '/etc/httpd/ssl.crt';

# location if fpfake.conf (FrontPage Apache config file)
$fpfake = '/etc/apache2/fpfake';

# location of FrontPage installation
$fp_homeDir = '/usr/local/frontpage';

# uid of FrontPage files
$fp_uid = '1';

# gid of FrontPage files
$fp_gid = '1';

# Apache base dir for config files (has subdirectory conf!)
$apache_root = '/etc/apache2';

# have seperate /cgi-bin/ for subdomains
$local_cgi = '';

# disable "AllowOverride All" for FrontPage webs (requires patched FrontPage)
$secure_fp = '';

# do not write NameVirtualHost for list of ips (seperated by :)
$excludeNVH = '';

# number of bytes to be added to every entry in Apache logfile analysis (default is 0!)
$httpbytes = '0';

# type of webserver ( apache1.3 | apache2.0 )
$httpd = 'apache2.0';


## email

# used mta ( sendmail | postfix | qmail )
$mta = 'postfix';

# location of mailspool directory
$mailSpool = '/var/spool/mail';

# type of maildrop ( /var/spool/mail/USER | HOMEDIR/Mailbox | HOMEDIR/Maildir/ )
$maildrop = '';

# name of Mailbox file
$mailBoxName = '';

# location of email virtusertable file
$virtUserTableDB = '/etc/postfix/confixx_virtualUsers';

# location of email local domains file
$localDomainsFile = '/etc/postfix/confixx_localDomains';

# location of makemap binary (sendmail only)
$bin_makemap = '';

# location of postmap binary (postfix only)
$bin_postmap = '/usr/sbin/postmap';

# location of postfix binary (postfix only)
$bin_postfix = '/usr/sbin/postfix';

# location of newaliases binary (sendmail & postfix)
$bin_newaliases = '/usr/bin/newaliases';

# location of mta main config file
$MailConfigFile = '/etc/postfix/main.cf';

# location of mail users homedir
$pop_homeDir = '';

# location of aliases binary (sendmail & postfix)
$aliases = '/etc/aliases';

# location of autoresponder.pl
$bin_autorespond = '/usr/bin/autoresponder.pl';

# XXX
$use_autorespond = '1';

# uid used by mta to run local scripts (e.g. autoresponder.pl)
$mta_uid = '51';

# gid used by mta to run local scripts (e.g. autoresponder.pl)
$mta_gid = '51';

# location of sendmail binary (to send mails from local)
$bin_sendmail = '/usr/sbin/sendmail';

# mail users get real homedir (ignoring $maildrop)
$mail_realHome = '';

# 1: mta is on localhost, 0: mta is on remote host
$mail_server = '1';

# XXX
$bin_confixxevent = '';

# XXX
$use_events = '1';


## scponly

# shell used for scp/sftp feature
$scponly_shell = '';

# name of directory in $user_homeDir with chroot-environment
$scponly_chroot = '';

## maillist
# directory where majordomo is installed
$majordomo_home = '/usr/lib/majordomo';

# location of majordomo wrapper binary
$majordomo_wrapper = '/usr/lib/majordomo/wrapper';

# majordomo mailinglists dir
$majordomo_ldir = '/usr/lib/majordomo/lists';

# majordomo username
$majordomo_user = 'mdom';


## IDN support

# XXX
$idn_shell =  '/usr/local/bin/idnconv';

# XXX
$idn_vendor = 'idnkit';

# XXX
$iconv_shell = '';


## spam protection

# XXX
$spamassassin_support = '1';

# path to spamassassin configuration file (local.cf)
$spamassassinConfig = '/etc/mail/spamassassin/local.cf';

# set this argument to the uid under which you spamassassin daemon is running
# (check '-u' option of 'spamd')
# if no value specified, than it is supposed then your spamd is running
# under the root user
$spamassassinUid = '';

## cold fusiomn

# XXX
$coldfusion_support = '1';


## cronjobs

# XXX
$cronjobs_support = '1';

## bins

# location of find binary
$bin_find = '/usr/bin/find';

# location of cp binary
$bin_cp = '/bin/cp';

# location of grep binary
$bin_grep = '/bin/grep';

# location of chown binary
$bin_chown = '/bin/chown';

# location of chmod binary
$bin_chmod = '/bin/chmod';

# location of rm binary
$bin_rm = '/bin/rm';

# location of du binary
$bin_du = '/usr/bin/du';

# location of ifconfig binary
$bin_ifconfig = '/sbin/ifconfig';

# location of webalizer binary
$bin_webalizer = '/usr/bin/webalizer';

# location of FrontPage binary (fpsrvadm.exe for 2000, owsadm.exe for 2002)
$bin_fpsrvadm = '/usr/local/frontpage/version5.0/bin/owsadm.exe';

# location of openssl binary
$bin_openssl = '/usr/bin/openssl';

# location for psql binary (if PostgreSQL is used)
$bin_psql = '';

# location of mysql binary
$bin_mysql = '/usr/bin/mysql';

# location of gzip binary
$bin_gzip = '/bin/gzip';

# location of tar binary
$bin_tar = '/bin/tar';

# location of unzip binary
$bin_unzip = '/usr/bin/unzip';

# XXX
$bin_iconv = '';

# XXX
$bin_idn = '';

# XXX
$bin_su = '/bin/su';

#quota
$use_quota = '1';
$mail_quota = '0';
$user_quota = '1';
$majordomo_quota = '0';
$inode_std = '0';

# ftp
$ftpDaemon = 'vsftpd';
$ftpConfFile = '/etc/vsftpd.conf';
$ftpLogFile = '/var/log/xferlog';
$ftpbytes = '0';
$chrootUsers = '/etc/chrootUsers';
$ftpEmail = '';

# dbs
$dbType = 'mysql';
$dbServer = 'localhost';
$dbUser = 'confixxuser';
$dbPw = 'streng geheim *ggg*';
$dbDB = 'confixxdb';
$mysqlUserServer = 'localhost';
$mysqlUserUser = 'root';
$mysqlUserPw = 'darf keiner wissen *ggg*';
$mysql_homeDir = '/var/lib/mysql';
$use_mysqlshell = '0';
$mysql_host = 'localhost';
$mysql_sock = '/var/lib/mysql/mysql.sock';

# cgis
$mail_pop3Server = 'localhost';

# dns
$dns_server = '1';
$dns_type = 'bind';
$dns_dir = '/var/lib/named';
$dns_extension = '.db';
$dns_configure = '/etc/named.conf';
$dns_serverid = '1';

$rpm_version_flag = '0';
$no_questions_mode = '0';

##

$no_pipelog_mode = '0';

## confixx updates
$new_version_url = 'http://updates.confixx.de/';

     ### ENDE ####

$db_address = 'DBI:mysql:confixxdb:localhost;mysql_socket=/var/lib/mysql/mysql.sock';

master.cf von Postfix

Code: Select all

#
# Postfix master process configuration file.  Each logical line
# describes how a Postfix daemon program should be run.
#
# A logical line starts with non-whitespace, non-comment text.
# Empty lines and whitespace-only lines are ignored, as are comment
# lines whose first non-whitespace character is a `#'.
# A line that starts with whitespace continues a logical line.
#
# The fields that make up each line are described below. A "-" field
# value requests that a default value be used for that field.
#
# Service: any name that is valid for the specified transport type
# (the next field).  With INET transports, a service is specified as
# host:port.  The host part (and colon) may be omitted. Either host
# or port may be given in symbolic form or in numeric form. Examples
# for the SMTP server:  localhost:smtp receives mail via the loopback
# interface only; 10025 receives mail on port 10025.
#
# Transport type: "inet" for Internet sockets, "unix" for UNIX-domain
# sockets, "fifo" for named pipes.
#
# Private: whether or not access is restricted to the mail system.
# Default is private service.  Internet (inet) sockets can't be private.
#
# Unprivileged: whether the service runs with root privileges or as
# the owner of the Postfix system (the owner name is controlled by the
# mail_owner configuration variable in the main.cf file). Only the
# pipe, virtual and local delivery daemons require privileges.
#
# Chroot: whether or not the service runs chrooted to the mail queue
# directory (pathname is controlled by the queue_directory configuration
# variable in the main.cf file). Presently, all Postfix daemons can run
# chrooted, except for the pipe, virtual and local delivery daemons.
# The proxymap server can run chrooted, but doing so defeats most of
# the purpose of having that service in the first place.
# The files in the examples/chroot-setup subdirectory describe how
# to set up a Postfix chroot environment for your type of machine.
#
# Wakeup time: automatically wake up the named service after the
# specified number of seconds. A ? at the end of the wakeup time
# field requests that wake up events be sent only to services that
# are actually being used.  Specify 0 for no wakeup. Presently, only
# the pickup, queue manager and flush daemons need a wakeup timer.
#
# Max procs: the maximum number of processes that may execute this
# service simultaneously. Default is to use a globally configurable
# limit (the default_process_limit configuration parameter in main.cf).
# Specify 0 for no process count limit.
#
# Command + args: the command to be executed. The command name is
# relative to the Postfix program directory (pathname is controlled by
# the daemon_directory configuration variable). Adding one or more
# -v options turns on verbose logging for that service; adding a -D
# option enables symbolic debugging (see the debugger_command variable
# in the main.cf configuration file). See individual command man pages
# for specific command-line options, if any.
#
# In order to use the "uucp" message tranport below, set up entries
# in the transport table.
#
# In order to use the "cyrus" message transport below, configure it
# in main.cf as the mailbox_transport.
#
# SPECIFY ONLY PROGRAMS THAT ARE WRITTEN TO RUN AS POSTFIX DAEMONS.
# ALL DAEMONS SPECIFIED HERE MUST SPEAK A POSTFIX-INTERNAL PROTOCOL.
#
# DO NOT SHARE THE POSTFIX QUEUE BETWEEN MULTIPLE POSTFIX INSTANCES.
#
# ==========================================================================
# service type  private unpriv  chroot  wakeup  maxproc command + args
#               (yes)   (yes)   (yes)   (never) (100)
# ==========================================================================
smtp      inet  n       -       n       -       -       smtpd
smtps     inet  n       -       n       -       -       smtpd
  -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes
#submission     inet    n       -       n       -       -       smtpd
#  -o smtpd_enforce_tls=yes -o smtpd_sasl_auth_enable=yes
#628      inet  n       -       n       -       -       qmqpd
pickup    fifo  n       -       n       60      1       pickup
cleanup   unix  n       -       n       -       0       cleanup
qmgr      fifo  n       -       n       300     1       qmgr
#qmgr     fifo  n       -       n       300     1       nqmgr
#tlsmgr   fifo  -       -       n       300     1       tlsmgr
rewrite   unix  -       -       n       -       -       trivial-rewrite
bounce    unix  -       -       n       -       0       bounce
defer     unix  -       -       n       -       0       bounce
flush     unix  n       -       n       1000?   0       flush
proxymap  unix  -       -       n       -       -       proxymap
smtp      unix  -       -       n       -       -       smtp
#relay    unix  -       -       n       -       -       smtp
#       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq     unix  n       -       n       -       -       showq
error     unix  -       -       n       -       -       error
local     unix  -       n       n       -       -       local
virtual   unix  -       n       n       -       -       virtual
lmtp      unix  -       -       n       -       -       lmtp
#localhost:10025 inet   n       -       n       -       -       smtpd -o content_filter=
#
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# maildrop. See the Postfix MAILDROP_README file for details.
#
#maildrop  unix  -       n       n       -       -       pipe
#  flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient}
cyrus     unix  -       n       n       -       -       pipe
  user=cyrus argv=/usr/lib/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
uucp      unix  -       n       n       -       -       pipe
  flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
ifmail    unix  -       n       n       -       -       pipe
  flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp     unix  -       n       n       -       -       pipe
  flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient
vscan     unix  -       n       n       -       10       pipe
  user=vscan argv=/usr/sbin/amavis ${sender} ${recipient}
procmail  unix  -       n       n       -       -       pipe
  flags=R user=nobody argv=/usr/bin/procmail -t -m /etc/procmailrc ${sender} ${recipient}
Hier die Logs:

warn.log

Code: Select all

Jul 13 03:00:02 pXXX spamc[3052]: connect() to spamd at 127.0.0.1 failed, retrying (1/3): Connection refused
Jul 13 03:00:03 pXXX spamc[3052]: connect() to spamd at 127.0.0.1 failed, retrying (2/3): Connection refused
Jul 13 03:00:04 pXXX spamc[3052]: connect() to spamd at 127.0.0.1 failed, retrying (3/3): Connection refused
Jul 13 03:00:05 pXXX spamc[3052]: connection attempt to spamd aborted after 3 retries
Jul 13 07:30:54 pXXX spamc[5002]: connect() to spamd at 127.0.0.1 failed, retrying (1/3): Connection refused
Jul 13 07:30:55 pXXX spamc[5002]: connect() to spamd at 127.0.0.1 failed, retrying (2/3): Connection refused
Jul 13 07:30:56 pXXX spamc[5002]: connect() to spamd at 127.0.0.1 failed, retrying (3/3): Connection refused
Jul 13 07:30:57 pXXX spamc[5002]: connection attempt to spamd aborted after 3 retries
Jul 13 10:03:06 pXXX spamc[6022]: connect() to spamd at 127.0.0.1 failed, retrying (1/3): Connection refused
Jul 13 10:03:07 pXXX spamc[6022]: connect() to spamd at 127.0.0.1 failed, retrying (2/3): Connection refused
Jul 13 10:03:08 pXXX spamc[6022]: connect() to spamd at 127.0.0.1 failed, retrying (3/3): Connection refused
Jul 13 10:03:09 pXXX spamc[6022]: connection attempt to spamd aborted after 3 retries
Jul 13 11:39:50 pXXX spamc[6661]: connect() to spamd at 127.0.0.1 failed, retrying (1/3): Connection refused
Jul 13 11:39:51 pXXX spamc[6661]: connect() to spamd at 127.0.0.1 failed, retrying (2/3): Connection refused
Jul 13 11:39:52 pXXX spamc[6661]: connect() to spamd at 127.0.0.1 failed, retrying (3/3): Connection refused
Jul 13 11:39:53 pXXX spamc[6661]: connection attempt to spamd aborted after 3 retries
Jul 13 15:25:04 pXXX spamc[8162]: connect() to spamd at 127.0.0.1 failed, retrying (1/3): Connection refused
Jul 13 15:25:05 pXXX spamc[8162]: connect() to spamd at 127.0.0.1 failed, retrying (2/3): Connection refused
Jul 13 15:25:06 pXXX spamc[8162]: connect() to spamd at 127.0.0.1 failed, retrying (3/3): Connection refused
Jul 13 15:25:07 pXXX spamc[8162]: connection attempt to spamd aborted after 3 retries
Jul 13 17:02:24 pXXX spamc[8849]: connect() to spamd at 127.0.0.1 failed, retrying (1/3): Connection refused
Jul 13 17:02:25 pXXX spamc[8849]: connect() to spamd at 127.0.0.1 failed, retrying (2/3): Connection refused
Jul 13 17:02:26 pXXX spamc[8849]: connect() to spamd at 127.0.0.1 failed, retrying (3/3): Connection refused
Jul 13 17:02:27 pXXX spamc[8849]: connection attempt to spamd aborted after 3 retries
Jul 13 17:22:10 pXXX spamc[8992]: connect() to spamd at 127.0.0.1 failed, retrying (1/3): Connection refused
Jul 13 17:22:11 pXXX spamc[8992]: connect() to spamd at 127.0.0.1 failed, retrying (2/3): Connection refused
Jul 13 17:22:12 pXXX spamc[8992]: connect() to spamd at 127.0.0.1 failed, retrying (3/3): Connection refused
Jul 13 17:22:13 pXXX spamc[8992]: connection attempt to spamd aborted after 3 retries
Jul 13 19:17:21 pXXX sshd[9873]: error: PAM: Authentication failure
Jul 14 00:32:46 pXXX postfix/smtpd[12143]: warning: 216.130.190.145: hostname mx145.tabadodo.com verification failed: Host not found, try again
Jul 14 00:54:55 pXXX postfix/smtpd[12728]: warning: 61.129.188.105: hostname ppp105-188-129-61.online.sh.cn verification failed: Host not found
Erklärung: Das connection refused kommt deshalb zustande, weil spamd nicht gestartet war. Diese Problem habe ich aber bereits gelöst. Ansonsten ist in der Log nichts auffälliges.

mail.log

Code: Select all

Jul 14 01:26:15 pXXX spamd[13341]: identified spam (12.3/5.0) for c12340p4:104 in 4.3 seconds, 17718 bytes.
Jul 14 01:26:15 pXXX postfix/local[13337]: 8F991C0017E: to=<c12340p4@pXXX.pureserver.info>, orig_to=<XXX@XXX.de>, relay=local, delay=4, status=sent ("|/usr/bin/procmail")
Jul 14 01:26:17 pXXX popper[13345]: Stats: c12340p4 1 21321 0 0 pD9E02DC4.dip.t-dialin.net 217.224.45.196 [pop_updt.c:296]
Jul 14 01:26:18 pXXX popper[13346]: Stats: c12340p5 0 0 0 0 pD9E02DC4.dip.t-dialin.net 217.224.45.196 [pop_updt.c:296]
Jul 14 01:26:18 pXXX popper[13347]: Stats: c12340p6 0 0 0 0 pD9E02DC4.dip.t-dialin.net 217.224.45.196 [pop_updt.c:296]
Jul 14 01:26:18 pXXX popper[13348]: Stats: c12340p7 0 0 0 0 pD9E02DC4.dip.t-dialin.net 217.224.45.196 [pop_updt.c:296]
Jul 14 01:26:19 pXXX popper[13349]: Stats: c12340p8 0 0 0 0 pD9E02DC4.dip.t-dialin.net 217.224.45.196 [pop_updt.c:296]
Jul 14 01:26:19 pXXX popper[13350]: Stats: c12340p9 0 0 0 0 pD9E02DC4.dip.t-dialin.net 217.224.45.196 [pop_updt.c:296]
Jul 14 01:27:53 pXXX postfix/smtpd[13380]: connect from unknown[195.243.186.250]
Jul 14 01:27:55 p15104961 postfix/smtpd[13380]: 53A79C0017E: client=unknown[195.243.186.250]
Jul 14 01:27:55 p15104961 postfix/smtpd[13380]: 53A79C0017E: reject: RCPT from unknown[195.243.186.250]: 554 <Pstrunk@XXX.de>: Relay access denied; from=<newsletter@maily.de> to=<Pstrunk@XXX.de> proto=ESMTP helo=<mail.maily.de>
Jul 14 01:28:00 p15104961 postfix/smtpd[13380]: disconnect from unknown[195.243.186.250]

Der Grund, warum ich den Servernamen und die E-Mail-Adressen in XXX umgewandelt habe ist, dass ich schon einmal Opfer eines Hacker-Angriffs geworden bin und deshalb bin ich jetzt etwas vorsichtiger. SORRY


Falls Ihr sonst noch Logs oder Config-Files benötigt, werde ich diese hier posten.

Ich hoffe, dass Ihr mir bei diesem Problem helfen könnt und wäre für jede Antwort dankbar. :)


Bis dann

DerPalit :lol:

the.dancer
Posts: 56
Joined: 2004-01-25 19:53

zu spät?

Post by the.dancer » 2004-08-20 06:39

lösung gefunden? wenn nicht, schreib einen cron, in welchem minütlich die datei local.cf dem user spamd zugeordnet wird. ist ein confixx-bug. gruss the.dancer