wenn ich
dig @217.160.xxx.xxx brockes48.de any
eingebe
kommt folgende meldung:
; <<>> DiG 9.2.0rc8 <<>> @217.160.xxx.xxx brockes48.de any
;; global options: printcmd
;; connection timed out; no servers could be reached
da stimmt doch wohl was nicht
hier mal die abgeänderten codes:
named.conf
Code: Select all
# Copyright (c) 2001 SuSE GmbH Nuernberg, Germany
#
# Author: Frank Bodammer <feedback@suse.de>
#
# /etc/named.conf
#
# This is a sample configuration file for the name server BIND9.
# It works as a caching only name server without modification.
#
# A sample configuration for setting up your own domain can be
# found in /usr/share/doc/packages/bind9/sample-config.
#
# A description of all available options can be found in
# /usr/share/doc/packages/bind9/misc/options.
options {
# The directory statement defines the name server´s
# working directory
directory "/var/named";
# The forwarders record contains a list of servers to
# which queries should be forwarded. Enable this line and
# modify the IP-address to your provider's name server.
# Up to three servers may be listed.
#forwarders { 10.11.12.13; 10.11.12.14; };
# Enable the next entry to prefer usage of the name
# server declared in the forwarders section.
#forward first;
# The listen-on record contains a list of local network
# interfaces to listen on. Optionally the port can be
# specified. Default is to listen on all interfaces found
# on your system. The default port is 53.
#listen-on port 53 { 127.0.0.1; };
# The listen-on-v6 record enables or disables listening
# on IPV6 interfaces. Allowed values are 'any' and 'none'
# or a list of addresses. IPv6 can only be used with
# kernel 2.4 in this release.
#listen-on-v6 { any; };
# The next three statements may be needed if a firewall
# stands between the local server and the internet.
#query-source address * port 53;
#transfer-source * port 53;
#notify-source * port 53;
# The allow-query record contains a list of networks or
# IP-addresses to accept and deny queries from. The
# default is to allow queries from all hosts.
#allow-query { 127.0.0.1; };
# If notify is set to yes (default), notify messages are
# sent to other name servers when the the zone data is
# changed. Instead of setting a global 'notify' statement
# in the 'options' section, a separate 'notify' can be
# added to each zone definition.
notify no;
auth-nxdomain no;
#erlaubt das zone-update zu ns.schlund.de und ns2.schlund.de
allow-transfer { 195.20.224.97; 195.20.225.34; };
};
# The following three zone definitions don't need any modification.
# The first one defines localhost while the second defines the
# reverse lookup for localhost. The last zone "." is the
# definition of the root name servers.
zone "localhost" in {
type master;
file "localhost.zone";
};
zone "0.0.127.in-addr.arpa" in {
type master;
file "127.0.0.zone";
};
zone "214.160.xxx.in-addr.arpa" in {
type master;
file "217.160.xxx.zone;
};
zone "." in {
type hint;
file "root.hint";
};
# You can insert further zone records for your own domains below.
zone "brockes48.de" {
type master;
file "default.hosts";
};
Code: Select all
$TIL 1W
@ IN SOA ns hostmaster (
2003063000
8H
2H
1W
12H )
@ IN NS ns
@ IN NS ns.schlund.de.
@ IN A 217.160.xxx.xxx
* IN A 217.160.xxx.xxx
@ IN MX 80 mx
* IN MX 80 mx
Code: Select all
$TIL 1W
@ IN SOA ns hostmaster (
2003063000
$TIL 1W
@ IN SOA ns.8unxxx.de. root.8unxxx.de. (
20020225019 ; serial
8H ; refresh
2H ; retry
1W ; expiry
12H) ; minimum
IN NS ns
IN NS ns.schlund.de.
xxx IN PTR 8unxxxx.de.
pxxxxxxxxxx:/var/named # ps ax | grep named
12609 pts/0 S 0:00 grep named
pxxxxxxxxxx:/var/named # rcnamed status
Checking for nameserver bind9 unused
pxxxxxxxxxx:/var/named # rcnamed start
Starting name server bind9 done
hier noch die letzten einträge der var/log warn
Jan 19 21:22:47 pxxxxxxxxxx named[12639]: /etc/named.conf:94: missing ';' before '.'
Jan 19 21:22:47 pxxxxxxxxxx named[12639]: /etc/named.conf:94: unknown option '.'
Jan 19 21:22:47 pxxxxxxxxxx named[12639]: /etc/named.conf:104: unexpected end of input near '"; };'
Jan 19 21:22:47 pxxxxxxxxxx named[12639]: loading configuration: unexpected end of input
Jan 19 21:22:47 pxxxxxxxxxx named[12639]: exiting (due to fatal error)
wäre nett wenn mir wer helfen könnte!!!
sorry bin anfänger werde mich aber bemühen meinen teil hier beizutragen
