server nach debian installer nicht erreichbar

[grinch]

nabend zusammen!
da mir die phpbb suche keine ergebnisse liefert und htdig auch nicht so wirklich zu funzen scheint und ich sonst nix entsprechendes gefunden hab muss ich hier mein leid klagen.
Wie im Topic schon steht hab ich versucht Debian mit Hilfe des Installers von debianhowto.de zu installieren.. es lief auch alles glatt durch und meiner Meinung nach ist auch alles richtig eingestellt. Nur sobald ich im normalen Modus neustarte kommt der Server nicht mehr online.
Hier mal das syslog:

Code: Select all

Jun  3 09:01:44 p151348 syslogd 1.4.1#10: restart.
Jun  3 09:01:44 p151348 kernel: klogd 1.4.1#10, log source = /proc/kmsg started.
Jun  3 09:01:44 p151348 kernel: Inspecting /boot/System.map-2.4.18-bf2.4
Jun  3 09:01:45 p151348 kernel: Loaded 19371 symbols from /boot/System.map-2.4.18-bf2.4.
Jun  3 09:01:45 p151348 kernel: Symbols match kernel version 2.4.18.
Jun  3 09:01:45 p151348 kernel: No module symbols loaded.
Jun  3 09:01:45 p151348 kernel: Linux version 2.4.18-bf2.4 (root@zombie) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Son Apr 14 09:53:28 CEST 2002
Jun  3 09:01:45 p151348 kernel: BIOS-provided physical RAM map:
Jun  3 09:01:45 p151348 kernel:  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
Jun  3 09:01:45 p151348 kernel:  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
Jun  3 09:01:45 p151348 kernel:  BIOS-e820: 00000000000e5400 - 0000000000100000 (reserved)
Jun  3 09:01:45 p151348 kernel:  BIOS-e820: 0000000000100000 - 000000000fef0000 (usable)
Jun  3 09:01:45 p151348 kernel:  BIOS-e820: 000000000fef0000 - 000000000feff000 (ACPI data)
Jun  3 09:01:45 p151348 kernel:  BIOS-e820: 000000000feff000 - 000000000ff00000 (ACPI NVS)
Jun  3 09:01:45 p151348 kernel:  BIOS-e820: 000000000ff00000 - 0000000010000000 (reserved)
Jun  3 09:01:45 p151348 kernel:  BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
Jun  3 09:01:45 p151348 kernel:  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Jun  3 09:01:45 p151348 kernel: On node 0 totalpages: 65264
Jun  3 09:01:45 p151348 kernel: zone(0): 4096 pages.
Jun  3 09:01:45 p151348 kernel: zone(1): 61168 pages.
Jun  3 09:01:45 p151348 kernel: zone(2): 0 pages.
Jun  3 09:01:45 p151348 kernel: Local APIC disabled by BIOS -- reenabling.
Jun  3 09:01:45 p151348 kernel: Found and enabled local APIC!
Jun  3 09:01:45 p151348 kernel: Kernel command line: auto BOOT_IMAGE=debian ro root=303
Jun  3 09:01:45 p151348 kernel: Initializing CPU#0
Jun  3 09:01:45 p151348 kernel: Detected 797.436 MHz processor.
Jun  3 09:01:45 p151348 kernel: Console: colour VGA+ 80x25
Jun  3 09:01:45 p151348 kernel: Calibrating delay loop... 1592.52 BogoMIPS
Jun  3 09:01:45 p151348 kernel: Memory: 253632k/261056k available (1783k kernel code, 7036k reserved, 549k data, 280k init, 0k highmem)
Jun  3 09:01:45 p151348 kernel: Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Jun  3 09:01:45 p151348 kernel: Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Jun  3 09:01:45 p151348 kernel: Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Jun  3 09:01:45 p151348 kernel: Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Jun  3 09:01:45 p151348 kernel: Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
Jun  3 09:01:45 p151348 kernel: CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
Jun  3 09:01:45 p151348 kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Jun  3 09:01:45 p151348 kernel: CPU: L2 cache: 256K
Jun  3 09:01:45 p151348 kernel: CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
Jun  3 09:01:45 p151348 kernel: Intel machine check architecture supported.
Jun  3 09:01:45 p151348 kernel: Intel machine check reporting enabled on CPU#0.
Jun  3 09:01:45 p151348 kernel: CPU:     After generic, caps: 0383fbff 00000000 00000000 00000000
Jun  3 09:01:45 p151348 kernel: CPU:             Common caps: 0383fbff 00000000 00000000 00000000
Jun  3 09:01:45 p151348 kernel: CPU: Intel Pentium III (Coppermine) stepping 06
Jun  3 09:01:45 p151348 kernel: Enabling fast FPU save and restore... done.
Jun  3 09:01:45 p151348 kernel: Enabling unmasked SIMD FPU exception support... done.
Jun  3 09:01:45 p151348 kernel: Checking 'hlt' instruction... OK.
Jun  3 09:01:45 p151348 kernel: Checking for popad bug... OK.
Jun  3 09:01:45 p151348 kernel: POSIX conformance testing by UNIFIX
Jun  3 09:01:45 p151348 kernel: enabled ExtINT on CPU#0
Jun  3 09:01:45 p151348 kernel: ESR value before enabling vector: 00000000
Jun  3 09:01:45 p151348 kernel: ESR value after enabling vector: 00000000
Jun  3 09:01:45 p151348 kernel: Using local APIC timer interrupts.
Jun  3 09:01:45 p151348 kernel: calibrating APIC timer ...
Jun  3 09:01:45 p151348 kernel: ..... CPU clock speed is 797.4281 MHz.
Jun  3 09:01:45 p151348 kernel: ..... host bus clock speed is 132.9044 MHz.
Jun  3 09:01:45 p151348 kernel: cpu: 0, clocks: 1329044, slice: 664522
Jun  3 09:01:45 p151348 kernel: CPU0<T0:1329040,T1:66512,D:6,S:664522,C:1329044>
Jun  3 09:01:45 p151348 kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Jun  3 09:01:45 p151348 kernel: mtrr: detected mtrr type: Intel
Jun  3 09:01:45 p151348 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd99e, last bus=1
Jun  3 09:01:45 p151348 kernel: PCI: Using configuration type 1
Jun  3 09:01:45 p151348 kernel: PCI: Probing PCI hardware
Jun  3 09:01:45 p151348 kernel: Unknown bridge resource 2: assuming transparent
Jun  3 09:01:45 p151348 kernel: PCI: Using IRQ router PIIX [8086/2410] at 00:1f.0
Jun  3 09:01:45 p151348 kernel: Linux NET4.0 for Linux 2.4
Jun  3 09:01:45 p151348 kernel: Based upon Swansea University Computer Society NET3.039
Jun  3 09:01:45 p151348 kernel: Initializing RT netlink socket
Jun  3 09:01:45 p151348 kernel: Starting kswapd
Jun  3 09:01:45 p151348 kernel: VFS: Diskquotas version dquot_6.4.0 initialized
Jun  3 09:01:45 p151348 kernel: Journalled Block Device driver loaded
Jun  3 09:01:45 p151348 kernel: vga16fb: initializing
Jun  3 09:01:45 p151348 kernel: vga16fb: mapped to 0xc00a0000
Jun  3 09:01:45 p151348 kernel: Console: switching to colour frame buffer device 80x30
Jun  3 09:01:45 p151348 kernel: fb0: VGA16 VGA frame buffer device
Jun  3 09:01:45 p151348 kernel: Detected PS/2 Mouse Port.
Jun  3 09:01:45 p151348 kernel: pty: 256 Unix98 ptys configured
Jun  3 09:01:45 p151348 kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
Jun  3 09:01:45 p151348 kernel: keyboard: Timeout - AT keyboard not present?(ed)
Jun  3 09:01:45 p151348 kernel: keyboard: Timeout - AT keyboard not present?(f4)
Jun  3 09:01:45 p151348 kernel: Real Time Clock Driver v1.10e
Jun  3 09:01:45 p151348 kernel: block: 128 slots per queue, batch=32
Jun  3 09:01:45 p151348 kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Jun  3 09:01:45 p151348 kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31
Jun  3 09:01:45 p151348 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jun  3 09:01:45 p151348 kernel: PIIX4: IDE controller on PCI bus 00 dev f9
Jun  3 09:01:45 p151348 kernel: PIIX4: chipset revision 2
Jun  3 09:01:45 p151348 kernel: PIIX4: not 100%% native mode: will probe irqs later
Jun  3 09:01:45 p151348 kernel:     ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio
Jun  3 09:01:45 p151348 kernel: hda: ST330621A, ATA DISK drive
Jun  3 09:01:45 p151348 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jun  3 09:01:45 p151348 kernel: hda: 58633344 sectors (30020 MB) w/1024KiB Cache, CHS=3649/255/63
Jun  3 09:01:45 p151348 kernel: ide-floppy driver 0.97.sv
Jun  3 09:01:45 p151348 kernel: Partition check:
Jun  3 09:01:45 p151348 kernel:  hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 >
Jun  3 09:01:45 p151348 kernel: floppy0: no floppy controllers found
Jun  3 09:01:45 p151348 kernel: Loading I2O Core - (c) Copyright 1999 Red Hat Software
Jun  3 09:01:45 p151348 kernel: I2O configuration manager v 0.04.
Jun  3 09:01:45 p151348 kernel:   (C) Copyright 1999 Red Hat Software
Jun  3 09:01:45 p151348 kernel: loop: loaded (max 8 devices)
Jun  3 09:01:45 p151348 kernel: Compaq CISS Driver (v 2.4.5)
Jun  3 09:01:45 p151348 kernel: HDLC support module revision 1.02 for Linux 2.4
Jun  3 09:01:45 p151348 kernel: Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Jun  3 09:01:45 p151348 kernel: Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
Jun  3 09:01:45 p151348 kernel: ide-floppy driver 0.97.sv
Jun  3 09:01:45 p151348 kernel: Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
Jun  3 09:01:45 p151348 kernel: Highpoint HPT370 Softwareraid driver for linux version 0.01
Jun  3 09:01:45 p151348 kernel: No raid array found
Jun  3 09:01:45 p151348 kernel: SCSI subsystem driver Revision: 1.00
Jun  3 09:01:45 p151348 kernel: Red Hat/Adaptec aacraid driver, Apr 14 2002
Jun  3 09:01:45 p151348 kernel: DC390: 0 adapters found
Jun  3 09:01:45 p151348 kernel: 3ware Storage Controller device driver for Linux v1.02.00.016.
Jun  3 09:01:45 p151348 kernel: 3w-xxxx: No cards with valid units found.
Jun  3 09:01:45 p151348 kernel: request_module[scsi_hostadapter]: Root fs not mounted
Jun  3 09:01:45 p151348 kernel: request_module[scsi_hostadapter]: Root fs not mounted
Jun  3 09:01:45 p151348 kernel: i2o_scsi.c: Version 0.0.1
Jun  3 09:01:45 p151348 kernel:   chain_pool: 0 bytes @ cfeeca80
Jun  3 09:01:45 p151348 kernel:   (512 byte buffers X 4 can_queue X 0 i2o controllers)
Jun  3 09:01:45 p151348 kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Jun  3 09:01:45 p151348 kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Jun  3 09:01:45 p151348 kernel: IP: routing cache hash table of 2048 buckets, 16Kbytes
Jun  3 09:01:45 p151348 kernel: TCP: Hash tables configured (established 16384 bind 16384)
Jun  3 09:01:45 p151348 kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Jun  3 09:01:45 p151348 kernel: kjournald starting.  Commit interval 5 seconds
Jun  3 09:01:45 p151348 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun  3 09:01:45 p151348 kernel: VFS: Mounted root (ext3 filesystem) readonly.
Jun  3 09:01:45 p151348 kernel: Freeing unused kernel memory: 280k freed
Jun  3 09:01:45 p151348 kernel: Adding Swap: 257032k swap-space (priority -1)
Jun  3 09:01:45 p151348 kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,3), internal journal
Jun  3 09:01:45 p151348 kernel: via-rhine.c:v1.10-LK1.1.13  Nov-17-2001  Written by Donald Becker
Jun  3 09:01:45 p151348 kernel:   http://www.scyld.com/network/via-rhine.html
Jun  3 09:01:45 p151348 kernel: kjournald starting.  Commit interval 5 seconds
Jun  3 09:01:45 p151348 kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal
Jun  3 09:01:45 p151348 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun  3 09:01:45 p151348 kernel: kjournald starting.  Commit interval 5 seconds
Jun  3 09:01:45 p151348 kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,5), internal journal
Jun  3 09:01:45 p151348 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun  3 09:01:45 p151348 kernel: kjournald starting.  Commit interval 5 seconds
Jun  3 09:01:45 p151348 kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal
Jun  3 09:01:45 p151348 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun  3 09:01:45 p151348 kernel: kjournald starting.  Commit interval 5 seconds
Jun  3 09:01:45 p151348 kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,7), internal journal
Jun  3 09:01:45 p151348 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun  3 09:01:45 p151348 kernel: kjournald starting.  Commit interval 5 seconds
Jun  3 09:01:45 p151348 kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,8), internal journal
Jun  3 09:01:45 p151348 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun  3 09:01:45 p151348 kernel: kjournald starting.  Commit interval 5 seconds
Jun  3 09:01:45 p151348 kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,9), internal journal
Jun  3 09:01:45 p151348 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun  3 09:01:45 p151348 named[165]: starting BIND 9.2.1
Jun  3 09:01:45 p151348 named[165]: using 1 CPU
Jun  3 09:01:45 p151348 lwresd[172]: starting BIND 9.2.1
Jun  3 09:01:45 p151348 lwresd[172]: using 1 CPU
Jun  3 09:01:45 p151348 rpc.statd[179]: Version 1.0 Starting
Jun  3 09:01:46 p151348 named[168]: loading configuration from '/etc/bind/named.conf'
Jun  3 09:01:46 p151348 lwresd[175]: loading configuration from '/etc/bind/lwresd.conf'
Jun  3 09:01:46 p151348 lwresd[175]: none:0: open: /etc/bind/lwresd.conf: file not found
Jun  3 09:01:46 p151348 lwresd[175]: loading configuration from '/etc/resolv.conf'
Jun  3 09:01:46 p151348 lpd[192]: restarted
Jun  3 09:01:46 p151348 named[168]: no IPv6 interfaces found
Jun  3 09:01:46 p151348 named[168]: listening on IPv4 interface lo, 127.0.0.1#53
Jun  3 09:01:47 p151348 lwresd[175]: no IPv6 interfaces found
Jun  3 09:01:47 p151348 named[168]: command channel listening on 127.0.0.1#953
Jun  3 09:01:47 p151348 named[168]: zone 0.in-addr.arpa/IN: loaded serial 1
Jun  3 09:01:47 p151348 lwresd[175]: couldn't add command channel 127.0.0.1#953: address in use
Jun  3 09:01:47 p151348 named[168]: zone 127.in-addr.arpa/IN: loaded serial 1
Jun  3 09:01:47 p151348 named[168]: zone 255.in-addr.arpa/IN: loaded serial 1
Jun  3 09:01:47 p151348 named[168]: zone localhost/IN: loaded serial 1
Jun  3 09:01:47 p151348 named[168]: running
Jun  3 09:01:47 p151348 lwresd[175]: lwres listening on 127.0.0.1#921
Jun  3 09:01:47 p151348 lwresd[175]: running
Jun  3 09:01:47 p151348 cardmgr[220]: starting, version is 3.1.33
Jun  3 09:01:47 p151348 cardmgr[220]: no pcmcia driver in /proc/devices
Jun  3 09:01:47 p151348 cardmgr[220]: exiting
Jun  3 09:01:48 p151348 /usr/sbin/cron[232]: (CRON) INFO (pidfile fd = 3)
Jun  3 09:01:48 p151348 /usr/sbin/cron[233]: (CRON) STARTUP (fork ok)
Jun  3 09:01:48 p151348 /usr/sbin/cron[233]: (CRON) INFO (Running @reboot jobs)
Jun  3 09:08:01 p151348 /USR/SBIN/CRON[252]: (mail) CMD (  if [ -x /usr/sbin/exim -a -f /etc/exim/exim.conf ]; then /usr/sbin/exim -q ; fi)

dann /etc/network/interfaces:

Code: Select all

auto lo
iface lo inet loopback

auto eth0
iface eth0 inet static
        address   217.160.191.xx
        netmask   255.255.255.0
        network   217.160.191.0
        broadcast 217.160.191.255
        gateway   217.160.191.1
        up      /sbin/route delete -net 217.160.191.0/24

wenn ihr noch mehr braucht, dann sagts ;)
also anhand des Logs schliesse ich, dass er irgendwie die Netzwerk Config nich gebacken kriegt, weil ich dazu nichts finden kann.. stellt sich bloss die Frage warum.. Bin für jede Hilfe dankbar

ach ja, es handelt sich um einen Rootserver PS (andere Hardware!?)

mfg
Grinch


edit: ich glaub fast das hat wirklich was mit der netzwerkkarte zu tun:

Code: Select all

01:08.0 Ethernet controller: Intel Corp. 82557 [Ethernet Pro 100] (rev 09)

weil mein "normaler" Rootie hat ja ne ganz andere

[captaincrunch]

Andere Hardware kannst du eigentlich ausschließen, denn

a) ist eine via-rhin drin, die vom Installer automatisch eingetragen wird
b) wenn der Kernel mit dem Chipsatz des Mutterbretts nicht zurecht kommen würde, käme die Kiste gar nicht so weit.

Ich vermute einen Fehler in der Netzwerkkonfiguration, da der Rechner ja anscheinend wunderbar hochfährt. Passt denn die IP ?

[grinch]

ja die ip stimmt..

[captaincrunch]

Ups, du hast Recht, auch dodolin hatte eben etwas dazu geschrieben. Ich ändere das ganz fix im Installer, damit nicht noch mehr darauf reinfallen.

Als Workaround kann ich dir nur raten, eepro100 in die /etc/modules (im "normalen" Filesystem, also auf den gemounteten Platten) eintztragen, dann wird's auch gehen.

[Edit : der Installer ist geändert und trägt jetzt auch das Intel-Modul direkt mit ein.]

[grinch]

habs auch grad gelesen.. und auch grad gemacht.. so nu hoffen dass es geht :)

[grinch]

perfekt.. funzt.. danke dir und natürlich auch dodolin :D

[dodolin]

Also der Debian-Way wäre AFAIK, dass man in /etc/modutils/aliases ganz am Ende

Code: Select all

# My additions below
alias eth0              eepro100

reinschreibt, danach

Code: Select all

update-modules

aufruft und und es zusätzlich noch in /etc/modules reinschreibt, z.B. so:

Code: Select all

trinity:~# cat /etc/modules
# /etc/modules: kernel modules to load at boot time.
#
# This file should contain the names of kernel modules that are
# to be loaded at boot time, one per line.  Comments begin with
# a "#", and everything on the line after them are ignored.

unix
af_packet
eepro100

Aber egal, Hauptsache, es geht. Ã?h... ich dachte jetzt allerdings, dass du eine via-rhine hast, denn

Code: Select all

Jun  3 09:01:45 p151348 kernel: via-rhine.c:v1.10-LK1.1.13  Nov-17-2001  Written by Donald Becker
Jun  3 09:01:45 p151348 kernel:   http://www.scyld.com/network/via-rhine.html 

sah für mich so aus, als würde das korrekt geladen. Hm... scheinbar doch nicht.

[grinch]

das war wohl nur das modul das durch den installer automatisch eingetragen wurde :)

naja.. egal.. auf jedenfall funzt es jetzt wunderbar :)

[captaincrunch]

Also der Debian-Way wäre AFAIK, dass man in /etc/modutils/aliases ganz am Ende

Jein, schau mal hier :
http://marc.theaimsgroup.com/?l=debian- ... 415785&w=2

Besonders der Absatz :

/etc/modules contains the names of modules that should be loaded when
the system boots. You add modules there as and when you need
them. They are loaded at boot time by the /etc/init.d/modutils script
using the modprobe command.

Die von dir vorgeschlagene Vorgehensweise wäre zwar korrekter, funktionieren tuen beide, und für den Installer ist die /etc/modules halt einfacher ... ;)