Speicherzugriffsfehler

[schweich1]

Hallo,

wenn ich den FTP-Server starten will, kommt folgende Fehlermeldung:

line 88: 2587 Speicherzugriffsfehler start-stop-daemon --start --quiet --pidfile "$PIDFILE" --oknodo --exec $DAEMON -- $OPTIONS


Kann mir vllt. jemand weiterhelfen, wie ich den Fehler behoben bekomme?

Gruß

schweich1

[daemotron]

Das sieht nach einem kaputten Binary aus - entweder das in $DAEMON gespeicherte Binary, oder start-stop-server (wobei letzteres auch bei anderen Daemonen zu Ärger führen müsste). Wie hast Du den ftpd denn installiert?

[schweich1]

Also Server neustarten bringt nichts, das habe ich schon versucht.

Habe proftpd normal installiert und dann nach den Angaben von SysCP konfiguriert.

[Joe User]

Habe proftpd normal installiert und dann nach den Angaben von SysCP konfiguriert.

Definiere bitte "normal" und "Angaben von SysCP".

[schweich1]

Installiert habe ich es mit:

apt-get install proftpd ucf


Angaben von SysCP:

Konfigurationsdateien: Bitte ändern Sie die entsprechenden Konfigurationsdateien
oder legen sie mit dem folgenden Inhalt neu an, falls sie nicht existieren.
Bitte beachten Sie: Das MySQL-Passwort wurde aus Sicherheitsgründen nicht ersetzt.
Bitte ersetzen Sie "MYSQL_PASSWORD" manuell durch das entsprechende Passwort.
Falls Sie es vergessen haben sollten, finden Sie es in der Datei "lib/userdata.inc.php".

/etc/proftpd/sql.conf:
<IfModule mod_sql.c>
DefaultRoot ~
RequireValidShell off
AuthOrder mod_sql.c

SQLBackend mysql
SQLEngine on
SQLAuthenticate on

SQLAuthTypes Crypt
SQLAuthenticate users* groups*
SQLConnectInfo syscp@localhost syscp MYSQL_PASSWORD
SQLUserInfo ftp_users username password uid gid homedir shell
SQLGroupInfo ftp_groups groupname gid members
SQLUserWhereClause "login_enabled = 'y'"

SQLLog PASS login
SQLNamedQuery login UPDATE "last_login=now(), login_count=login_count+1 WHERE username='%u'" ftp_users

SQLLog RETR download
SQLNamedQuery download UPDATE "down_count=down_count+1, down_bytes=down_bytes+%b WHERE username='%u'" ftp_users

SQLLog STOR upload
SQLNamedQuery upload UPDATE "up_count=up_count+1, up_bytes=up_bytes+%b WHERE username='%u'" ftp_users
</IfModule>



/etc/proftpd/modules.conf:
#
# This file is used to manage DSO modules and features.
#

# This is the directory where DSO modules reside

ModulePath /usr/lib/proftpd

# Allow only user root to load and unload modules, but allow everyone
# to see which modules have been loaded

ModuleControlsACLs insmod,rmmod allow user root
ModuleControlsACLs lsmod allow user *

LoadModule mod_ctrls_admin.c
LoadModule mod_tls.c

# Install proftpd-mod-mysql or proftpd-mod-pgsql to use this
LoadModule mod_sql.c

# Install proftpd-mod-ldap to use this
#LoadModule mod_ldap.c

#
# 'SQLBackend mysql' or 'SQLBackend postgres' directives are required
# to have SQL authorization working. You can also comment out the
# unused module here, in alternative.
#

# Install proftpd-mod-mysql to use this
LoadModule mod_sql_mysql.c

# Install proftpd-mod-pgsql to use this
#LoadModule mod_sql_postgres.c

LoadModule mod_radius.c
LoadModule mod_quotatab.c
LoadModule mod_quotatab_file.c

# Install proftpd-mod-ldap to use this
#LoadModule mod_quotatab_ldap.c

# Install proftpd-mod-pgsql or proftpd-mod-mysql to use this
#LoadModule mod_quotatab_sql.c
LoadModule mod_quotatab_radius.c
LoadModule mod_wrap.c
LoadModule mod_rewrite.c
LoadModule mod_load.c
LoadModule mod_ban.c
LoadModule mod_wrap2.c
LoadModule mod_wrap2_file.c
# Install proftpd-mod-pgsql or proftpd-mod-mysql to use this
#LoadModule mod_wrap2_sql.c
LoadModule mod_dynmasq.c


# keep this module the last one
LoadModule mod_ifsession.c



/etc/proftpd/proftpd.conf:
#
# /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file.
# To really apply changes reload proftpd after modifications.
#

# Includes DSO modules
Include /etc/proftpd/modules.conf

# Set off to disable IPv6 support which is annoying on IPv4 only boxes.
UseIPv6 on
# If set on you can experience a longer connection delay in many cases.
IdentLookups off

ServerName "werbe-adler.de FTP Server"
ServerType standalone
DeferWelcome off

MultilineRFC2228 on
DefaultServer on
ShowSymlinks on

TimeoutNoTransfer 600
TimeoutStalled 600
TimeoutIdle 1200

DisplayLogin welcome.msg
DisplayChdir .message true
ListOptions "-l"

DenyFilter *.*/

# Use this to jail all users in their homes
# DefaultRoot ~

# Users require a valid shell listed in /etc/shells to login.
# Use this directive to release that constrain.
# RequireValidShell off

# Port 21 is the standard FTP port.
Port 21

# In some cases you have to specify passive ports range to by-pass
# firewall limitations. Ephemeral ports can be used for that, but
# feel free to use a more narrow range.
# PassivePorts 49152 65534

# If your host was NATted, this option is useful in order to
# allow passive tranfers to work. You have to use your public
# address and opening the passive ports used on your firewall as well.
# MasqueradeAddress 1.2.3.4

# This is useful for masquerading address with dynamic IPs:
# refresh any configured MasqueradeAddress directives every 8 hours
<IfModule mod_dynmasq.c>
# DynMasqRefresh 28800
</IfModule>

# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 30

# Set the user and group that the server normally runs at.
User proftpd
Group nogroup

# Umask 022 is a good standard umask to prevent new files and dirs
# (second parm) from being group and world writable.
Umask 022 022
# Normally, we want files to be overwriteable.
AllowOverwrite on

# Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords:
# PersistentPasswd off

# This is required to use both PAM-based authentication and local passwords
# AuthOrder mod_auth_pam.c* mod_auth_unix.c

# Be warned: use of this directive impacts CPU average load!
# Uncomment this if you like to see progress and transfer rate with ftpwho
# in downloads. That is not needed for uploads rates.
#
# UseSendFile off

TransferLog /var/log/proftpd/xferlog
SystemLog /var/log/proftpd/proftpd.log

<IfModule mod_quotatab.c>
QuotaEngine off
</IfModule>

<IfModule mod_ratio.c>
Ratios off
</IfModule>


# Delay engine reduces impact of the so-called Timing Attack described in
# http://security.lss.hr/index.php?page=d ... 2004-10-02
# It is on by default.
<IfModule mod_delay.c>
DelayEngine off
</IfModule>

<IfModule mod_ctrls.c>
ControlsEngine off
ControlsMaxClients 2
ControlsLog /var/log/proftpd/controls.log
ControlsInterval 5
ControlsSocket /var/run/proftpd/proftpd.sock
</IfModule>

<IfModule mod_ctrls_admin.c>
AdminControlsEngine off
</IfModule>

#
# Alternative authentication frameworks
#
#Include /etc/proftpd/ldap.conf
Include /etc/proftpd/sql.conf

#
# This is used for FTPS connections
#
#Include /etc/proftpd/tls.conf


Edit: Ist n vServer mit Debian 5.0 Lenny

[Roger Wilco]

http://serversupportforum.de/forum/ftp/ ... ehler.html