Mrtg bekomme ich nicht zum laufen

Apache, Lighttpd, nginx, Cherokee
Post Reply
espirt
Posts: 10
Joined: 2005-05-17 17:25
 

Mrtg bekomme ich nicht zum laufen

Post by espirt »

Ich bekomme immer die gleich Fehlermeldung vom cfgmaker
h:/etc # SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.5 on public@hxx.serverkompetenz.net:
-bash: SNMPWALK: command not found
h:/etc # at /usr/bin/cfgmaker line 138
parse error. Last token seen: /
Garbled time
h:/etc # --base: Writing /etc/mrtg.conf
-bash: --base:: command not found
h:/etc # cfgmaker --global 'WorkDir: /srv/www/htdocs/web0/html/mrtg' --global 'Options[_]: bits,growright' --output /etc/mrtg.conf public@xx.x.176.23 --base: Get Device Info on public@xx.x.176.23 :
SNMP Error:
Received SNMP response with error code
error status: noSuchName
index 1 (OID: 1.3.6.1.2.1.1.9.1.4.9)
SNMPv1_Session (remote host: "xx.x.176.23 " [xx.x.176.23 ].161)
community: "public"
request ID: -1821330273
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/bin/../lib/mrtg2/SNMP_util.pm line 628
--base: Vendor Id:
--base: Populating confcache
--snpo: Skipping ifDescr scanning because public@xx.x.176.23 : does not seem to support it
--snpo: Skipping ifName scanning because public@xx.x.176.23 : does not seem to support it
--snpo: Skipping ipAdEntIfIndex scanning because public@xx.x.176.23 : does not seem to support it
--snpo: Skipping ifType scanning because public@xx.x.176.23 : does not seem to support it
--snpo: Skipping ifPhysAddress scanning because public@xx.x.176.23 : does not seem to support it
--base: Get Interface Info
--base: Walking ifIndex
SNMP Error:
Received SNMP response with error code
error status: noSuchName
index 1 (OID: 1.3.6.1.2.1.2.2.1.1)
SNMPv1_Session (remote host: "xx.x.176.23 " [xx.x.176.23 ].161)
community: "public"
request ID: -1821330267
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/bin/../lib/mrtg2/SNMP_util.pm line 570
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.1 on public@xx.x.176.23 :
at /usr/bin/cfgmaker line 111
--base: Walking ifType
Ich habe den snmp gestartet und habe auch das in der snmp.conf stehen was Ihr in Eurer FAQ drinne habt. Ich hoffe Ihr könnt mir helfen. Die Fehlermeldung ist nicht komplett da sie noch viel länger ist.


Gruss Espirt
jhnet
Posts: 98
Joined: 2004-07-20 11:43
 

Re: Mrtg bekomme ich nicht zum laufen

Post by jhnet »

Hallo,

ein erster Ansatz wäre zu prüfen ob Du snmpwalk installiert hast und ob es im Pafd ist.
Bei SuSE zum Beispiel ist das im Paket net-snmp enthalten und wird nach /usr/bin installiert.

Bye,
Jörg
Post Reply