mein Name Server antwortet nicht richtig.
Local gibt er Antworten, wenn ich Ihn aber von hier aus über T-ONLINE anfrage bekomme ich die Meldung:
C:>nslookup rentalsound.de ns01.24seven-hosting.com
DNS request timed out.
timeout was 2 seconds.
*** Der Servername für die Adresse 217.172.176.185 konnte nicht gefunden werden.
Timed out
Server: UnKnown
Address: 217.172.176.185
DNS request timed out.
timeout was 2 seconds.
*** Zeitüberschreitung bei Anforderung an UnKnown
Komischerweise, mache ich dies im Büro über Kabel Badenwürtemberg, dort geht es komischerweise.
Schlund ist nicht in der Lage den Server anzufragen, die bekommen auch ein Time Out.
Ich komme einfach nicht weiter...
Hier die named.conf:
Code: Select all
# Copyright (c) 2001-2003 SuSE Linux AG, Nuernberg, Germany.
# All rights reserved.
#
# Author: Frank Bodammer, Lars Mueller <lmuelle@suse.de>
#
# /etc/named.conf
#
# This is a sample configuration file for the name server BIND 9. It works as
# a caching only name server without modification.
#
# A sample configuration for setting up your own domain can be found in
# /usr/share/doc/packages/bind9/sample-config.
#
# A description of all available options can be found in
# /usr/share/doc/packages/bind9/misc/options.
options {
# The directory statement defines the name server's working directory
directory "/var/lib/named";
# Write dump and statistics file to the log subdirectory. The
# pathenames are relative to the chroot jail.
dump-file "/var/log/named_dump.db";
statistics-file "/var/log/named.stats";
# The forwarders record contains a list of servers to which queries
# should be forwarded. Enable this line and modify the IP address to
# your provider's name server. Up to three servers may be listed.
#forwarders { 192.0.2.1; 192.0.2.2; };
# Enable the next entry to prefer usage of the name server declared in
# the forwarders section.
allow-transfer { 195.20.224.97; 195.20.225.34; };
#forward first;
# The listen-on record contains a list of local network interfaces to
# listen on. Optionally the port can be specified. Default is to
# listen on all interfaces found on your system. The default port is
# 53.
#listen-on port 53 { 127.0.0.1; };
# The listen-on-v6 record enables or disables listening on IPv6
# interfaces. Allowed values are 'any' and 'none' or a list of
# addresses.
listen-on-v6 { any; };
# The next three statements may be needed if a firewall stands between
# the local server and the internet.
#query-source address * port 53;
#transfer-source * port 53;
#notify-source * port 53;
# The allow-query record contains a list of networks or IP addresses
# to accept and deny queries from. The default is to allow queries
# from all hosts.
#allow-query { 127.0.0.1; };
# If notify is set to yes (default), notify messages are sent to other
# name servers when the the zone data is changed. Instead of setting
# a global 'notify' statement in the 'options' section, a separate
# 'notify' can be added to each zone definition.
notify yes;
};
# To configure named's logging remove the leading '#' characters of the
# following examples.
#logging {
# # Log queries to a file limited to a size of 100 MB.
# channel query_logging {
# file "/var/log/named_querylog"
# versions 3 size 100M;
# print-time yes; // timestamp log entries
# };
# category queries {
# query_logging;
# };
#
# # Or log this kind alternatively to syslog.
# channel syslog_queries {
# syslog user;
# severity info;
# };
# category queries { syslog_queries; };
#
# # Log general name server errors to syslog.
# channel syslog_errors {
# syslog user;
# severity error;
# };
# category default { syslog_errors; };
#
# # Don't log lame server messages.
# category lame-servers { null; };
#};
# The following zone definitions don't need any modification. The first one
# is the definition of the root name servers. The second one defines
# localhost while the third defines the reverse lookup for localhost.
acl local {
127.0.0/8;
217.172.176.185;
};
acl secondary {
195.20.224.97;
195.20.225.34;
};
acl trusted {
};
zone "." in {
type hint;
file "root.hint";
};
zone "localhost" in {
type master;
file "localhost.zone";
};
zone "0.0.127.in-addr.arpa" in {
type master;
file "127.0.0.zone";
};
# Include the meta include file generated by SuSEconfig.named. This includes
# all files as configured in NAMED_CONF_INCLUDE_FILES from
# /etc/sysconfig/named
include "/etc/named.conf.include";
# include "/etc/named.d/named.conf.eazy";
# You can insert further zone records for your own domains below or create
# single files in /etc/named.d/ and add the file names to
# NAMED_CONF_INCLUDE_FILES.
# See /usr/share/doc/packages/bind/README.SuSE for more details.
Code: Select all
zone "rentalsound.de" {
type master;
file "/var/lib/named/eazydns/rentalsound.de.db";
allow-query { any; };};Code: Select all
$ORIGIN rentalsound.de.
$TTL 86400
rentalsound.de. IN SOA ns01.24seven-hosting.com. hostmaster.24seven-hosting.com. (
2004082401
10800
3600
604800
86400 )
rentalsound.de. 86400 IN A 217.172.176.184
*.rentalsound.de. 86400 IN A 217.172.176.184
rentalsound.de. 86400 IN MX 10 mail.rentalsound.de.
rentalsound.de. 86400 IN NS ns01.24seven-hosting.com.
rentalsound.de. 86400 IN NS ns.schlund.de.
Code: Select all
; <<>> DiG 9.2.2 <<>> rentalsound.de
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 56792
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 2, ADDITIONAL: 2
;; QUESTION SECTION:
;rentalsound.de. IN A
;; ANSWER SECTION:
rentalsound.de. 86400 IN A 217.172.176.184
;; AUTHORITY SECTION:
rentalsound.de. 86400 IN NS ns.schlund.de.
rentalsound.de. 86400 IN NS ns01.24seven-hosting.com.
;; ADDITIONAL SECTION:
ns.schlund.de. 86001 IN A 195.20.224.97
ns01.24seven-hosting.com. 86400 IN A 217.172.176.185
;; Query time: 0 msec
;; SERVER: 127.0.0.1#53(127.0.0.1)
;; WHEN: Mon Aug 30 09:26:42 2004
;; MSG SIZE rcvd: 143
Vielen Dank im Vorraus,
Dino