RootForum Community

Code: Select all

Have a lot of fun...
static:~ # yast -i quota
static:~ # touch /aquota.user /aquota.group
static:~ # chmod 600 /aquota.*
static:~ # mount -o remount /
static:~ # quotacheck -avugm
quotacheck: Your kernel probably supports journaled quota but you are not using it. 
Consider switching to journaled quota to avoid running quotacheck after an unclean shutdown.
quotacheck: WARNING -  Quotafile //aquota.user was probably truncated. Cannot save quota settings...
quotacheck: WARNING -  Quotafile //aquota.group was probably truncated. Cannot save quota settings...
quotacheck: Scanning /dev/md2 [/] done
quotacheck: Checked 5067 directories and 45224 files
static:~ # quotaon -avug
/dev/md2 [/]: group quotas turned on
/dev/md2 [/]: user quotas turned on
static:~ # modinfo quota_v1
filename:       /lib/modules/2.6.27.21-0.1-default/kernel/fs/quota_v1.ko
license:        GPL
description:    Old quota format support
author:         Jan Kara
srcversion:     0F1EB8D37B46982FF5A2138
depends:
supported:      yes
vermagic:       2.6.27.21-0.1-default SMP mod_unload modversions
static:~ # modinfo quota_v2
filename:       /lib/modules/2.6.27.21-0.1-default/kernel/fs/quota_v2.ko
license:        GPL
description:    Quota format v2 support
author:         Jan Kara
srcversion:     4104266BD2AD209B52F7AE6
depends:        quota_tree
supported:      yes
vermagic:       2.6.27.21-0.1-default SMP mod_unload modversions
static:~ # uname -r
2.6.27.21-0.1-default
static:~ #

Code: Select all

proc /proc proc defaults 0 0
none /dev/pts devpts gid=5,mode=620 0 0
/dev/md0 none swap sw 0 0
/dev/md1 /boot ext3 defaults 0 0
/dev/md2 / ext3 defaults,usrquota,grpquota 0 0

Code: Select all

h1xxxxxx:/ # touch /aquota.user /aquota.group
h1xxxxxx:/ # chmod 600 /aquota.*
h1xxxxxx:/ # mount -o remount /
h1xxxxxx:/ # quotacheck -avugm
quotacheck: Your kernel probably supports journaled quota but you are not using it. Consider switching to journaled quota to avoid running quotacheck after an unclean shutdown.
quotacheck: Scanning /dev/md1 [/] done
quotacheck: Checked 53177 directories and 422258 files

Code: Select all

h1xxxxxxx:/ # quotaon -va
/dev/md1 [/]: group quotas turned on
/dev/md1 [/]: user quotas turned on

Code: Select all

h1xxxxxx:/ # /etc/init.d/boot.quota status
Checking for quota:                                                   running

Code: Select all

# Description: Initiert qouta für Resourcenanzeige
### END INIT INFO

case "$1" in
'start')
	touch /aquota.user /aquota.group
	chmod 600 /aquota.*
	mount -o remount /
	quotacheck -avugm
	
	sleep 5m
	
	quotaon -va
	
	/etc/init.d/psa restart
	;;
'stop')
	;;
*)
	echo "Usage: $0 { start | stop }"
	;;
esac
exit 0

Code: Select all

#! /bin/sh
#
# Copyright (c) 2001-2002 SuSE Linux AG, Nuernberg, Germany.
# All rights reserved.
#
# /etc/init.d/boot.quota
#
### BEGIN INIT INFO
# Provides:          boot.quota
# Required-Start:    boot.rootfsck
# Required-Stop:     
# Should-Start:      boot.crypto boot.swap boot.clock $local_fs
# Should-Stop:
# Default-Start:     B
# Default-Stop:
# Short-Description: check quotas and turn quota on
# Description:       check quotas and turn quota on
### END INIT INFO

# Shell functions sourced from /etc/rc.status:
#      rc_check         check and set local and overall rc status
#      rc_status        check and set local and overall rc status
#      rc_status -v     ditto but be verbose in local rc status
#      rc_status -v -r  ditto and clear the local rc status
#      rc_failed        set local and overall rc status to failed
#      rc_failed <num>  set local and overall rc status to <num>
#      rc_reset         clear local rc status (overall remains)
#      rc_exit          exit appropriate to overall rc status

. /etc/rc.status
rc_reset

# Return values acc. to LSB for all commands but status:
# 0 - success
# 1 - generic or unspecified error
# 2 - invalid or excess argument(s)
# 3 - unimplemented feature (e.g. "reload")
# 4 - insufficient privilege
# 5 - program is not installed
# 6 - program is not configured
# 7 - program is not running
#
# Note that starting an already running service, stopping
# or restarting a not-running service as well as the restart
# with force-reload (in case signalling is not supported) are
# considered a success.

QUOTACHECK=/sbin/quotacheck
QUOTAON=/sbin/quotaon
QUOTAOFF=/sbin/quotaoff
RUNFILE=/var/run/quota

case "$1" in
  start)
	#
	#
	# reinit quota, if fsck has returned value != 0
	#
	
	echo "Turning quota on"
	
	if ! $QUOTAOFF -ap | grep -q "on$"; then
	    # Check quota
	    if test -x $QUOTACHECK; then
		echo "Checking quotas. This may take some time."
		if test -f /fsck_corrected_errors; then
		    $QUOTACHECK -Mavug || rc_failed
		else
		    awk < /etc/fstab '{
			match($4, "(usr)?(j)?q(u)ota(=([^,]*))?", a);
			match($4, "(g)rp(j)?quota(=([^,]*))?", b);
			if(a[3] || b[1]) {
			    if(a[3] && !a[5]) a[5] = "aquota.user";
			    if(b[1] && !b[4]) b[4] = "aquota.group";
			    print $2 " " a[3]b[1] " " a[5] " " b[4];
			}
		    }' | while read fs opt files; do
			for i in $files; do
			     test -f $fs/$i || { $QUOTACHECK -v -M -$opt $fs || rc_failed; break; }
			done
		    done
		fi
	    fi

	    if test $? -eq 0; then
		# Turn quota on
		if test -x $QUOTAON; then
		    $QUOTAON -avug || rc_failed
		fi
	    fi
	fi
	rc_status -v
	;;
    stop)
	echo "Turning off quota"
	if $QUOTAOFF -ap | grep -q "on$"; then
	    $QUOTAOFF -avug || rc_failed
	fi
	rc_status -v
	;;
    try-restart)
        ## Stop the service and if this succeeds (i.e. the
        ## service was running before), start it again.
        ## Note: try-restart is not (yet) part of LSB (as of 0.7.5)
        $0 status >/dev/null && $0 restart

        # Remember status and be quiet
        rc_status
        ;;
    restart)
        ## Stop the service and regardless of whether it was
        ## running or not, start it again.
        $0 stop
        $0 start

        # Remember status and be quiet
        rc_status
        ;;
    force-reload)
        ## Signal the daemon to reload its config. Most daemons
        ## do this on signal 1 (SIGHUP).
        ## If it does not support it, restart.

        echo -n "Restarting quota:"
        $0 stop && $0 start
        rc_status
        ;;
    reload)
        ## Like force-reload, but if daemon does not support
        ## signalling, do nothing (!)
        rc_failed 3
        rc_status -v
        ;;
    status)
        echo -n "Checking for quota:"
        ## Check status with checkproc(8), if process is running
        ## checkproc will return with exit status 0.

        # Status has a slightly different for the status command:

        # Status has a slightly different for the status command:
        # 0 - service running
        # 1 - service dead, but /var/run/  pid  file exists
        # 2 - service dead, but /var/lock/ lock file exists
        # 3 - service not running

        # NOTE: checkproc returns LSB compliant status values.
        #checkproc $FOO_BIN
	if $QUOTAOFF -ap | grep -q "on$"; then rc_failed 0; else rc_failed 3; fi
        rc_status -v
        ;;
    *)
        echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload}"
	exit 1
	;;
esac
rc_exit

Code: Select all

touch /aquota.user /aquota.group
   chmod 600 /aquota.*
   mount -o remount /
   quotacheck -avugm

Code: Select all

# /etc/init.d/boot.quota start
# /etc/init.d/boot.quota stop