Inspecting /boot/System.map-2.6.5-7.75-default
Loaded 23738 symbols from /boot/System.map-2.6.5-7.75-default.
Symbols match kernel version 2.6.5.
No module symbols loaded - kernel modules not enabled.
klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.6.5-7.75-default (geeko@buildhost) (gcc version 3.3.3 (SuSE Linux)) #1 Mon Jun 14 10:44:37 UTC 2004
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001f7f0000 (usable)
<4> BIOS-e820: 000000001f7f0000 - 000000001f7f3000 (ACPI NVS)
<4> BIOS-e820: 000000001f7f3000 - 000000001f800000 (ACPI data)
<4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
<5>509MB vmalloc/ioremap area available.
<5>0MB HIGHMEM available.
<5>503MB LOWMEM available.
<4>On node 0 totalpages: 129008
<4> DMA zone: 4096 pages, LIFO batch:1
<4> Normal zone: 124912 pages, LIFO batch:16
<4> HighMem zone: 0 pages, LIFO batch:1
<6>DMI 2.2 present.
<6>ACPI: RSDP (v000 VIA694 ) @ 0x000f8050
<6>ACPI: RSDT (v001 VIA694 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x1f7f3000
<6>ACPI: FADT (v001 VIA694 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x1f7f3040
<6>ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
<6>ACPI: PM-Timer IO Port: 0x4008
<6>ACPI: local apic disabled
<4>VSYSCALL: consistency checks...passed...mapping...done.
<4>VSYSCALL: fixmap virt addr: 0xffffc000
<4>Built 1 zonelists
<4>Kernel command line: BOOT_IMAGE=Linux ro root=302 resume=/dev/hda1 splash=silent desktop
<6>bootsplash: silent mode.
<6>Initializing CPU#0
<4>PID hash table entries: 2048 (order 11: 16384 bytes)
<4>CKRM Initialization
<4>...... Initializing ClassType<taskclass> ........
<4>...... Initializing ClassType<socket_class> ........
<4>CKRM Initialization done
<4>Detected 1666.512 MHz processor.
<6>Using tsc for high-res timesource
<4>Console: colour dummy device 80x25
<6>Memory: 506848k/516032k available (1961k kernel code, 8428k reserved, 690k data, 216k init, 0k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<4>Calibrating delay loop... 3276.80 BogoMIPS
<6>Security Scaffold v1.0.0 initialized
<6>SELinux: Disabled at boot.
<6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<4>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
<7>CPU: After generic identify, caps: 0383f9ff c1c3f9ff 00000000 00000000
<7>CPU: After vendor identify, caps: 0383f9ff c1c3f9ff 00000000 00000000
<6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
<6>CPU: L2 Cache: 256K (64 bytes/line)
<7>CPU: After all inits, caps: 0383f9ff c1c3f9ff 00000000 00000020
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<4>CPU: AMD Athlon(tm) XP 2000+ stepping 00
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<6>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
<6>Looking for DSDT in initrd ...No customized DSDT found in initrd!
<6>Freeing initrd memory: 1151k freed
<6>NET: Registered protocol family 16
<6>PCI: PCI BIOS revision 2.10 entry at 0xfb5c0, last bus=1
<6>PCI: Using configuration type 1
<6>mtrr: v2.0 (20020519)
<6>ACPI: Subsystem revision 20040326
<4>ACPI: IRQ12 SCI: Level Trigger.
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<4>Disabling VIA memory write queue (PCI ID 3112, rev 00): [55] f9 & 1f -> 19
<7>ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
<4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
<6>PCI: Using ACPI for IRQ routing
<6>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
<6>vesafb: framebuffer at 0xd5800000, mapped to 0xe0006000, size 8128k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=4
<6>vesafb: protected mode interface info at c000:7ecc
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<6>fb0: VESA VGA frame buffer device
<6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
<5>apm: overridden by ACPI.
<4>Initial HugeTLB pages allocated: 0
<5>VFS: Disk quotas dquot_6.5.1
<6>Initializing Cryptographic API
<6>Applying VIA southbridge workaround.
<6>PCI: Disabling Via external APIC routing
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>bootsplash 3.1.6-2004/03/31: looking for picture...
<6>...no good signature found.
<4>Console: switching to colour frame buffer device 128x48
<6>Real Time Clock Driver v1.12
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>Using anticipatory io scheduler
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>VP_IDE: IDE controller at PCI slot 0000:00:07.1
<6>VP_IDE: chipset revision 6
<6>VP_IDE: not 100%% native mode: will probe irqs later
<6>VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
<6> ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:pio
<6> ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:pio, hdd:pio
<4>hda: Maxtor 6E040L0, ATA DISK drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>hda: max request size: 128KiB
<6>hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
<4>hda: cache flushes supported
<6> hda: hda1 hda2
<4>ide-floppy driver 0.99.newide
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>input: AT Translated Set 2 keyboard on isa0060/serio0
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>NET: Registered protocol family 2
<6>IP: routing cache hash table of 4096 buckets, 32Kbytes
<6>TCP: Hash tables configured (established 32768 bind 65536)
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 8
<6>NET: Registered protocol family 20
<4>Resume Machine: resuming from /dev/hda1
<4>Resuming from device hda1
<3>Resume Machine: This is normal swap space
<6>ACPI: (supports S0 S1 S4 S5)
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<5>RAMDISK: Compressed image found at block 0
<4>VFS: Mounted root (ext2 filesystem).
<5>ReiserFS: hda2: found reiserfs format "3.6" with standard journal
<5>ReiserFS: hda2: using ordered data mode
<4>reiserfs: using flush barriers
<5>ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>ReiserFS: hda2: checking transaction log (hda2)
<5>ReiserFS: hda2: Using r5 hash to sort names
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<5>Trying to move old root to /initrd ... failed
<5>Unmounting old root
<5>Trying to free ramdisk memory ... okay
<6>Freeing unused kernel memory: 216k freed
<6>Adding 1000400k swap on /dev/hda1. Priority:42 extents:1
<4>reiserfs: enabling write barrier flush mode
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>device-mapper: 4.1.0-ioctl (2003-12-10) initialised:
dm@uk.sistina.com
<6>subfs 0.9
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Mon Jun 28 10:32:57 2004
<notice>run boot scripts (boot.proc)
<notice>exit status of (boot.proc) is (0)
<notice>run boot scripts (boot.shm)
Mounting shared memory FS on /dev/shmdone
<notice>exit status of (boot.shm) is (0)
<notice>run boot scripts (boot.rootfsck)
Activating swap-devices in /etc/fstab...
doneChecking root file system...
fsck 1.34 (25-Jul-2003)
Reiserfs super block in block 16 on 0x302 of format 3.6 with standard journal
Blocks (total/free): 9786544/9513373 by 4096 bytes
Filesystem is clean
Filesystem seems mounted read-only. Skipping journal replay.
Checking internal tree..finished
done<notice>exit status of (boot.rootfsck) is (0)
<notice>run boot scripts (boot.md boot.device-mapper)
Activating device mapper...
Creating /dev/mapper/control character device with major:10 minor:63.
done
<notice>exit status of (boot.md boot.device-mapper) is (0 0)
<notice>run boot scripts (boot.localfs)
Checking file systems...
fsck 1.34 (25-Jul-2003)
doneSetting updone
Mounting local file systems...
proc on /proc type proc (rw)
tmpfs on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hdd on /media/dvd type subfs (ro,nosuid,nodev,fs=cdfss,procuid,iocharset=utf8)
done<notice>exit status of (boot.localfs) is (0)
<notice>run boot scripts (boot.crypto)
<notice>exit status of (boot.crypto) is (0)
<notice>run boot scripts (boot.swap boot.scpm boot.restore_permissions boot.loadmodules)
Loading required kernel modules
doneRestore device permissionsdone
Activating remaining swap-devices in /etc/fstab...
done<notice>exit status of (boot.swap boot.scpm boot.restore_permissions boot.loadmodules) is (0 0 0 0)
<notice>run boot scripts (boot.idedma boot.clock)
Setting up the CMOS clockdone
<notice>exit status of (boot.idedma boot.clock) is (0 0)
<notice>run boot scripts (boot.ldconfig)
Setting up linker cache (/etc/ld.so.cache) using ldconfigdone
Setting up timezone datadone
<notice>exit status of (boot.ldconfig) is (0)
<notice>run boot scripts (boot.sched boot.localnet boot.isapnp)
Setting scheduling timeslices unused
Setting up hostname 'linux'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
done
<notice>exit status of (boot.sched boot.localnet boot.isapnp) is (6 0 0)
<notice>run boot scripts (boot.klog boot.ipconfig)
Enabling syn flood protectiondone
Disabling IP forwardingdone
Creating /var/log/boot.msg
done<notice>killproc: kill(340,29)
<notice>System Boot Control: The system has been set up
Skipped features: boot.sched
System Boot Control: Running /etc/init.d/boot.local
exit status of (boot.klog boot.ipconfig) is (0 0)
done<notice>killproc: kill(340,3)
INIT: Entering runlevel: 3
Boot logging started on /dev/tty1(/dev/console) at Mon Jun 28 10:33:11 2004
Master Resource Control: previous runlevel: N, switching to runlevel: 3
<notice>
start services (random hotplug)Hotplug is already active (disable with NOHOTPLUG=1 at the boot prompt)done
Initializing random number generatordone
<notice>exit status of (random hotplug) is (0 0)
<notice>start services (coldplug)
coldplug scanning input: **done
scanning pci: ***.**Wdone
scanning usb: done
. . . . . . . . . . . . . . . . . . . . . . . .done
<notice>exit status of (coldplug) is (0)
<notice>start services (network)
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
done eth0 device: Linksys Network Everywhere Fast Ethernet 10/100 model NC100 (rev 11)
eth0 configuration: eth-id-00:10:dc:7c:e9:0a
eth0 IP address: XXX.XXX.XXX.XX/27
doneSetting up service network . . . . . . . . . . . . . . . .done
<notice>exit status of (network) is (0)
<notice>start services (syslog)
Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=24 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 SHLVL=2 BOOT_IMAGE=Linux splash=silent sscripts=39 _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=24 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 SHLVL=2 BOOT_IMAGE=Linux splash=silent sscripts=39 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
<notice>exit status of (syslog) is (0)
<notice>start services (webmin resmgr portmap)
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=25 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 SHLVL=2 BOOT_IMAGE=Linux splash=silent sscripts=39 _=/sbin/startproc DAEMON=/sbin/portmap ]
Starting RPC portmap daemondone
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=25 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 SHLVL=2 BOOT_IMAGE=Linux splash=silent sscripts=39 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
Starting resource managerdone
<notice>exit status of (webmin resmgr portmap) is (0 0 0)
<notice>start services (postfix)
Starting mail service (Postfix)done
<notice>exit status of (postfix) is (0)
<notice>start services (nfsboot)
Starting nfsboot (sm-notify) done
<notice>exit status of (nfsboot) is (0)
<notice>start services (sshd running-kernel powersaved mysql fbset cron alsasound)
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=30 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 SHLVL=2 BOOT_IMAGE=Linux splash=silent sscripts=39 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=30 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 SHLVL=2 BOOT_IMAGE=Linux splash=silent sscripts=39 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
Starting CRON daemondone
Starting SSH daemondone
Starting sound driverdone
Starting service MySQL
done
loading ACPI modules (ac battery button fan processor thermal ) Starting powersaved <notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -e /etc/powersave.conf -a resmgr -v 3 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=30 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 SHLVL=2 BOOT_IMAGE=Linux splash=silent sscripts=39 _=/sbin/startproc DAEMON=/usr/sbin/powersaved ]
done
<notice>exit status of (sshd running-kernel powersaved mysql fbset cron alsasound) is (0 0 0 0 0 0 0)
<notice>start services (apache2)
Starting httpd2 (prefork) <notice>startproc: execve (/usr/sbin/httpd2-prefork) [ /usr/sbin/httpd2-prefork -f /etc/apache2/httpd.conf ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh get_module_list_done=true progress=37 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=128 get_includes_done=true PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=48 SHLVL=2 BOOT_IMAGE=Linux splash=silent sscripts=39 _=/sbin/startproc DAEMON=/usr/sbin/httpd2-prefork ]
done
<notice>exit status of (apache2) is (0)
<notice>start services (kbd)
Loading keymap qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table winkeys shiftctrl latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu -m trivial (K
done<notice>exit status of (kbd) is (0)
<notice>start services (hwscan)
Starting hardware scan on boot<notice>exit status of (hwscan) is (0)
Master Resource Control: runlevel 3 has been reached
<notice>killproc: kill(621,3)