bind9 probleme !

Bind, PowerDNS
darkkiller
Posts: 6
Joined: 2003-12-27 12:31

bind9 probleme !

Post by darkkiller » 2004-01-26 22:22

Hab probvlem mit meiner domain http://www.server-factory.com kann mir evnetuell jemand sagen was an meinen Konfigs falsch is !?

Code: Select all

 # Copyright (c) 2001-2003 SuSE Linux AG, Nuernberg, Germany
#
# Author: Frank Bodammer, Lars Mueller <lmuelle@suse.de>
#
# /etc/named.conf
#
# This is a sample configuration file for the name server BIND 9.
# It works as a caching only name server without modification.
#
# A sample configuration for setting up your own domain can be
# found in /usr/share/doc/packages/bind9/sample-config.
#
# A description of all available options can be found in
# /usr/share/doc/packages/bind9/misc/options.

options {

        # The directory statement defines the name server's
        # working directory

        directory "/var/lib/named";

        # The forwarders record contains a list of servers to
        # which queries should be forwarded. Enable this line and
        # modify the IP-address to your provider's name server.
        # Up to three servers may be listed.

        #forwarders { 10.11.12.13; 10.11.12.14; };

        # Enable the next entry to prefer usage of the name
        # server declared in the forwarders section.

        #forward first;

        # The listen-on record contains a list of local network
        # interfaces to listen on. Optionally the port can be
        # specified. Default is to listen on all interfaces found
        # on your system. The default port is 53.

        listen-on port 53 { 62.141.50.221; 62.141.51.221; };
       # The listen-on-v6 record enables or disables listening
        # on IPV6 interfaces. Allowed values are 'any' and 'none'
        # or a list of addresses. IPv6 can only be used with
        # kernel 2.4 in this release.

        listen-on-v6 { any; };

        # The next three statements may be needed if a firewall
        # stands between the local server and the internet.

        #query-source address * port 53;
        #transfer-source * port 53;
        #notify-source * port 53;

        # The allow-query record contains a list of networks or
        # IP-addresses to accept and deny queries from. The
        # default is to allow queries from all hosts.

        #allow-query { 127.0.0.1; };

        # If notify is set to yes (default), notify messages are
        # sent to other name servers when the the zone data is
        # changed. Instead of setting a global 'notify' statement
        # in the 'options' section, a separate 'notify' can be
        # added to each zone definition.

        notify no;
};

# Remove the leading '#' characters if you want a log of the queries send to
# your name server. The log file size is limited to 100 MB.
#logging {
#       channel query_logging {
#               file "/var/log/named_querylog"
#                       versions 3 size 100M;
#               print-time yes;                 // timestamp log entries
#       };
#       category queries {
#               query_logging;
#       };
#       category lame-servers { null; };
#};



und die zone server-factory.com

Code: Select all


$TTL 86400
@       IN SOA  server-factory.com. root.ns.km1021.keymachine.de. (
                2004012520;     serial number YYYYMMDDxx
                10800;  refresh time in seconds
                3600;   retry time in seconds
                604800; time in seconds
                86400); minimum time to live in seconds
;name servers
                IN NS   ns.km1021.keymachine.de.
                IN NS   ns2.km1021.keymachine.de.
;mx informations
                IN MX   10 mail
;host informations
                IN A    62.141.50.221
ns              IN A    62.141.50.221
ns2             IN A    62.141.51.221
www             IN A    62.141.50.221
mail            IN A    62.141.50.221

NAMESERVER sind erreichbar

ns.km1021.keymachine.de
und
ns2.km1021.keymachine.de

kase
Posts: 1031
Joined: 2002-10-14 22:56

Re: bind9 probleme !

Post by kase » 2004-01-26 22:45

Du solltest schon deine Domain auch in die Named.config mit passendem Zone File eintragen, damit Bind auch davon weiß.

Auch wenn du Suse hast, solltest du mal ein Blick in dieses HowTo werfen, da dort auch vieles über die Konfiguration steht, teilweise 1und1 spezifisch, aber leicht zu übertragen, sowohl auf andere Distris (Suse) wie auch andere Anbieter.

http://www.debianhowto.de/howtos/de/bind/c_bind.html

oxygen
Posts: 2138
Joined: 2002-12-15 00:10
Location: Bergheim

Re: bind9 probleme !

Post by oxygen » 2004-01-26 23:02

darkkiller wrote:Hab probvlem mit meiner domain http://www.server-factory.com kann mir evnetuell jemand sagen was an meinen Konfigs falsch is !?
...

NAMESERVER sind erreichbar

ns.km1021.keymachine.de
und
ns2.km1021.keymachine.de
Nicht wirklich:
dig @ns.km1021.keymachine.de server-factory.com a any +aaonly

; <<>> DiG 8.3 <<>> @ns2.km1021.keymachine.de server-factory.com a any +aaonly
; Bad server: ns2.km1021.keymachine.de -- using default server and timer opts
; (3 servers found)
;; res options: init aaonly(unimpl) recurs defnam dnsrch
;; got answer:
;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 5104
;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0
;; QUERY SECTION:
;; server-factory.com, type = ANY, class = IN

dig @ns2.km1021.keymachine.de server-factory.com a any +aaonly

; <<>> DiG 8.3 <<>> @ns2.km1021.keymachine.de server-factory.com a any +aaonly
; Bad server: ns.km1021.keymachine.de -- using default server and timer opts
; (3 servers found)
;; res options: init aaonly(unimpl) recurs defnam dnsrch
;; got answer:
;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 5104
;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0
;; QUERY SECTION:
;; server-factory.com, type = ANY, class = IN

darkkiller
Posts: 6
Joined: 2003-12-27 12:31

Re: bind9 probleme !

Post by darkkiller » 2004-01-27 10:06

Code: Select all

  
zone "." in {
        type hint;
        file "root.hint";
};

zone "localhost" in {
        type master;
        file "localhost.zone";
};

zone "0.0.127.in-addr.arpa" in {
        type master;
        file "127.0.0.zone";
};

zone "km1021.keymachine.de" {
        type master;
        file "km1021.keymachine.de";
};

zone "server-factory.com" in {
        type master;
        file "server-factory.com";
};
is beim kopieren nicht ganz mitgegangen ;-)

Bind 9 war über nacht nich gestartet ist nun Online !

darkkiller
Posts: 6
Joined: 2003-12-27 12:31

Re: bind9 probleme !

Post by darkkiller » 2004-01-27 10:09

so leutz hab grad probiert !
und was is ?
domain geht !?

bitte closen !

darkkiller
Posts: 6
Joined: 2003-12-27 12:31

Re: bind9 probleme !

Post by darkkiller » 2004-01-27 10:15

weil ich keinen Neuen thread áufmachen will !

1) kann ich bei bind9 eine subdomain anlegen das z.b
hilfe.server-factory.com
in ein anderes verzeichniss zeigt ?!
wenn ja wie ?
oder muss das beim apache eingestellt werden !?

kase
Posts: 1031
Joined: 2002-10-14 22:56

Re: bind9 probleme !

Post by kase » 2004-01-30 16:17

Dazu musst du einen WildCard auf deine Domain setzen, dann zeigt jede Subdomain auf die gleiche IP. Allerdings nicht in ein spezifisches Verzeichnis, sowas kann nur der Apache. Ergänze einfach dein Zone-File um folgenden *-Eintrag:

Code: Select all

ns2             IN A    62.141.51.221 
www             IN A    62.141.50.221 
mail            IN A    62.141.50.221 
*            IN A    62.141.50.221       
Danach neustarten, und 1 bis 2 Tage warten, bis alle NameServer den Wildcard übernommen haben. Danach ist es lediglich eine Apache Config Sache, aber das is hierzu das falsche Forum, und dazu gibt es sicherlich auch schon etliche Thread... ( SuchFunktion => vHost(s) )