SCSI Raid1 Performance
Re: SCSI Raid1 Performance
Hast Du vor Deinen "Benchmarks" auch brav alle Caches/Buffer (Filesystem, Kernel, HDD, Controller) geleert und deaktiviert?
Andernfalls sind die "Benchmarks" sinnfrei...
Andernfalls sind die "Benchmarks" sinnfrei...
PayPal.Me/JoeUser ● FreeBSD Remote Installation
Wings for Life ● Wings for Life World Run
„If there’s more than one possible outcome of a job or task, and one
of those outcomes will result in disaster or an undesirable consequence,
then somebody will do it that way.“ -- Edward Aloysius Murphy Jr.
Wings for Life ● Wings for Life World Run
„If there’s more than one possible outcome of a job or task, and one
of those outcomes will result in disaster or an undesirable consequence,
then somebody will do it that way.“ -- Edward Aloysius Murphy Jr.
Re: SCSI Raid1 Performance
Um nochmal aufs Thema zurück zu kommen, ein Linux Software RAID1 sollte bei der Schreibperformance genauso schnell sein wie langsamerer der beiden Platten. Beim Lesen so schnell wie das doppelte der langsameren Platte. Die Ergebnisse sind wirklich nicht überzeugend. Hast du die Möglichkeit die Platten an unterscheidliche SCSI Kanäle anzuschließen? Falls ja solltest du das tun.
Re: SCSI Raid1 Performance
Es geht um Hardware RAID1 ;)oxygen wrote:...Software RAID1...
PayPal.Me/JoeUser ● FreeBSD Remote Installation
Wings for Life ● Wings for Life World Run
„If there’s more than one possible outcome of a job or task, and one
of those outcomes will result in disaster or an undesirable consequence,
then somebody will do it that way.“ -- Edward Aloysius Murphy Jr.
Wings for Life ● Wings for Life World Run
„If there’s more than one possible outcome of a job or task, and one
of those outcomes will result in disaster or an undesirable consequence,
then somebody will do it that way.“ -- Edward Aloysius Murphy Jr.
Re: SCSI Raid1 Performance
Dabei handelt es sich um eine Ausgabe von bonnie++. Allerdings finde ich diese sehr schwer zu interpretieren. Die merkwürdige Ausgabe macht es auch nicht gerade einfacher.matzewe01 wrote: Ohnehin lassen sich die genannten Zahlen kaum verwerten, da unklar ist wie und wodurch diese entstanden sind.
Re: SCSI Raid1 Performance
Das ist für ATA133 im RAID1 ein normaler Wert - Durchsatz pro Bus sind da normalerweise ~30MB/sec., und im RAID1 wird parallel gelesen (zumindest wenn der Controller nicht total Asche ist).matzewe01 wrote:erhebliche Zweifel kommen mir auf jeden Fall bei 60 MB / s auf IDE Seite.
“Some humans would do anything to see if it was possible to do it. If you put a large switch in some cave somewhere, with a sign on it saying 'End-of-the-World Switch. PLEASE DO NOT TOUCH', the paint wouldn't even have time to dry.” — Terry Pratchett, Thief of Time