Problem with FTP VHCS

[thegamerbg]

Hello,

I just installed Debian Sarge 3.1 x86_64 on my server. Then I installed VHCS 2.4.7.2 without any Problems. Control Panel is working. I can add my domains, users, mail adresses (also use those adresses with pop -> everything tested and working)

I can also add an FTP user without any error messages.

The Problem occurs while connecting to this FTP via SmartFTP Client. Heres what it says:

[23:06:21] Resolving host name "xxxxxxxxx.de"
[23:06:21] Connecting to xxx.xxx.xxx.xxx Port: 21
[23:06:21] Connected to xxxxxxxxx.de.
[23:06:31] 220 ProFTPD 1.2.10 Server (s15211437) [xxx.xxx.xxx.xxx]
[23:06:31] USER ralph
[23:06:31] 331 Password required for ralph.
[23:06:31] PASS (hidden)
[23:06:31] 530 Login incorrect.
[23:06:31] Active Help: http://www.smartftp.com/support/kb/index.php/51
[23:06:31] Cannot login waiting to retry (30s)...

I've doublechecked if the password is the right one, and yes the passowrd ist the right one. Then I've used another passowrd and another user but no success it won't connect.

Whats wrong here?

TheGamerBG

[Roger Wilco]

Whats wrong here?

1) This is a German speaking discussion board, so please write in German (I know you can. ;))
2) Schau in deine Logs, zeig deine proftpd.conf

[thegamerbg]

Sorry hab das auch an einem anderen Ort gefragt und war zu faul um zu uebersetzen :)

hier /etc/proftpd.conf (Wohlgemerkt die nach VHCS unveraenderte conf)

#
# VHCS proftpd config file
#
#

ServerName "namewegindiziert"
ServerType standalone
DeferWelcome off

ShowSymlinks on
MultilineRFC2228 on
DefaultServer on
ShowSymlinks on
AllowOverwrite on

LogFormat traff "%b %u"

TimeoutNoTransfer 600
TimeoutStalled 600
TimeoutIdle 1200

DisplayLogin welcome.msg
DisplayFirstChdir .message

#LsDefaultOptions "-l"

DenyFilter *.*/

DefaultRoot ~

# Uncomment this if you are using NIS or LDAP to retrieve passwords:
#PersistentPasswd off

# Port 21 is the standard FTP port.

Port 21

# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)

MaxInstances 30

# Set the user and group that the server normally runs at.

User nobody
Group nogroup

# Normally, we want files to be overwriteable.

<Directory /*>
# Umask 022 is a good standard umask to prevent new files and dirs
# (second parm) from being group and world writable.
Umask 022 022

AllowOverwrite on
HideNoAccess on
</Directory>

<Limit ALL>
IgnoreHidden on
</Limit>

<Global>
TransferLog /var/log/xferlog
ExtendedLog /var/log/ftp_traff.log read,write traff
PathDenyFilter ".quota$"
</Global>

<IfModule mod_delay.c>
DelayEngine off
</IfModule>

#
# VHCS2 Managment;
#

SQLAuthTypes Crypt
SQLAuthenticate on
SQLConnectInfo vhcs2@localhost vftp passwortwegindiziert
SQLUserInfo ftp_users userid passwd uid gid homedir shell
SQLGroupInfo ftp_group groupname gid members
SQLMinID 2000

#
# VHCS2 Quota management;
#

QuotaEngine on
QuotaShowQuotas on
QuotaDisplayUnits Mb

SQLNamedQuery get-quota-limit SELECT "name, quota_type, per_session, limit_type, bytes_in_avail, bytes_out_avail, bytes_xfer_avail, files_in_avail, files_out_avail, files_xfer_avail FROM quotalimits WHERE name = '%{0}' AND quota_type = '%{1}'"
SQLNamedQuery get-quota-tally SELECT "name, quota_type, bytes_in_used, bytes_out_used, bytes_xfer_used, files_in_used, files_out_used, files_xfer_used FROM quotatallies WHERE name = '%{0}' AND quota_type = '%{1}'"
SQLNamedQuery update-quota-tally UPDATE "bytes_in_used = bytes_in_used + %{0}, bytes_out_used = bytes_out_used + %{1}, bytes_xfer_used = bytes_xfer_used + %{2}, files_in_used = files_in_used + %{3}, files_out_used = files_out_used + %{4}, files_xfer_used = files_xfer_used + %{5} WHERE name = '%{6}' AND quota_type = '%{7}'" quotatallies
SQLNamedQuery insert-quota-tally INSERT "%{0}, %{1}, %{2}, %{3}, %{4}, %{5}, %{6}, %{7}" quotatallies

QuotaLock /var/run/proftpd/tally.lock
QuotaLimitTable sql:/get-quota-limit
QuotaTallyTable sql:/get-quota-tally/update-quota-tally/insert-quota-tally


UseReverseDNS off
IdentLookups off

[Roger Wilco]

Überprüfe, ob die Zugangsdaten in der Tabelle `ftp_users` korrekt sind. Aktiviere im Zweifel das MySQL Querylog, so dass du die Abfragen nachvollziehen kannst.