Page 1 of 1
Horde Installation ... Fehler meldung
Posted: 2005-09-29 17:00
by xamibor
Hi
Hat jemand von euch ahnung was die folgende Fehlermeldung zu bedeuten hat? es ist die test.php der horde installation ...
Code: Select all
Warning: main(PEAR.php): failed to open stream: No such file or directory in /srv/www/htdocs/confixx/html/mail/lib/core.php on line 26
Warning: main(): Failed opening 'PEAR.php' for inclusion (include_path='/srv/www/htdocs/confixx/html/mail/lib:.:/srv/www/htdocs/confixx/html/include:/srv/www/htdocs/confixx/html') in /srv/www/htdocs/confixx/html/mail/lib/core.php on line 26
Warning: main(Log.php): failed to open stream: No such file or directory in /srv/www/htdocs/confixx/html/mail/lib/Horde.php on line 3
Warning: main(): Failed opening 'Log.php' for inclusion (include_path='/srv/www/htdocs/confixx/html/mail/lib:.:/srv/www/htdocs/confixx/html/include:/srv/www/htdocs/confixx/html') in /srv/www/htdocs/confixx/html/mail/lib/Horde.php on line 3
Warning: horde_test(/srv/www/htdocs/confixx/html/mail/lib/../config/registry.php): failed to open stream: No such file or directory in /srv/www/htdocs/confixx/html/mail/lib/Test.php on line 74
Warning: horde_test(): Failed opening '/srv/www/htdocs/confixx/html/mail/lib/../config/registry.php' for inclusion (include_path='/srv/www/htdocs/confixx/html/mail/lib:.:/srv/www/htdocs/confixx/html/include:/srv/www/htdocs/confixx/html') in /srv/www/htdocs/confixx/html/mail/lib/Test.php on line 74
Warning: Cannot modify header information - headers already sent by (output started at /srv/www/htdocs/confixx/html/mail/lib/core.php:26) in /srv/www/htdocs/confixx/html/mail/lib/Test.php on line 84
Warning: Cannot modify header information - headers already sent by (output started at /srv/www/htdocs/confixx/html/mail/lib/core.php:26) in /srv/www/htdocs/confixx/html/mail/lib/Test.php on line 85
Horde Version
Wäre dankbar für etwas start Hilfe.
Re: Horde Installation ... Fehler meldung
Posted: 2005-09-29 17:11
by Roger Wilco
Re: Horde Installation ... Fehler meldung
Posted: 2005-09-29 17:18
by xamibor
Hast recht sorry.
dachte das bei suse 9.1 es schin dabei ist.
ziehe alles zrück
Re: Horde Installation ... Fehler meldung
Posted: 2005-09-30 17:46
by xamibor
pear ist jetzt vorhanden ... immer noch diese fehlermeldung ...
lt INSTALL von horde solten folgende pear paket installiert werden:
Code: Select all
pear install Log Mail Mail_Mime DB Date File
pear -d preferred_state=beta install -a Services_Weather
Was könnte noch das problem sein?
Das sind alle Pakete die installiert sind:
Code: Select all
All packages:
=============
Package Latest Local
APC 3.0.8
Cache 1.5.4
Cache_Lite 1.5.2
apd 1.0.1
memcache 1.5
parsekit 1.0
perl 0.6
PHP_Compat 1.4.1
PHP_CompatInfo 1.0.0
Var_Dump 1.0.2
Xdebug 1.3.2
Archive_Tar 1.3.1 1.1
bz2 1.0
Contact_Vcard_Build 1.1.1
Contact_Vcard_Parse 1.31.0
Fileinfo 1.0
File_Archive 1.5.3
File_Fstab 2.0.2
File_HtAccess 1.1.0
File_Passwd 1.1.6
File_SMBPasswd 1.0.2
MP3_ID 1.1.4
zip 1.0
Auth 1.2.3
Auth_HTTP 2.1.6
Auth_PrefManager 1.1.4
Auth_RADIUS 1.0.4
Auth_SASL 1.0.1
radius 1.2.4
Benchmark 1.2.3
DTrace 1.0.3
big_int 1.0.7
Math_Basex 0.3
Math_Fibonacci 0.8
Math_Integer 0.8
Math_Matrix 0.8.0
Math_RPN 1.1.1
Math_Stats 0.8.5
Math_TrigOp 1.0
Bitset 1.0
bz2_filter 1.1.0
Stream_SHM 1.0.0
Stream_Var 1.0.0
zlib_filter 1.1
Config 1.10.4
Console_Getargs 1.3.0
Console_Getopt 1.2 1.0
Console_Table 1.0.2
newt 1.1
System_Command 1.0.2
crack 0.4
crack_dll 0.4
huffman 0.2.0
MIME_Type 1.0.0
PhpDocumentor 1.2.3
Crypt_Blowfish 1.0.1
Crypt_CBC 0.4
Crypt_CHAP 1.0.0
Crypt_HMAC 1.0.1
Crypt_RC4 1.0.2
Crypt_RSA 1.0.0
Crypt_Xtea 1.0
cybermut 1.1
mcve 1.0.0
Payment_Clieop 0.1.1
Payment_DTA 1.2.0
spplus 1.0
TCLink 3.4.0
cyrus 1.0
Net_CheckIP 1.1
Net_Curl 1.2.2
Net_Dict 1.0.3
Net_Dig 0.1
Net_DNS 0.03
Net_DNSBL 1.0.0
Net_Finger 1.0.0
Net_FTP 1.3.1
Net_Geo 1.0
Net_Gopher 1.0.0
Net_Ident 1.1.0
Net_IMAP 1.0.3
Net_IPv4 1.2
Net_IPv6 1.0.5
Net_LMTP 1.0.1
Net_NNTP 1.0.1
Net_Ping 2.4
Net_POP3 1.3.6
Net_Portscan 1.0.2
Net_Sieve 1.1.1
Net_SmartIRC 1.0.0
Net_SMTP 1.2.7 1.2.3
Net_Socket 1.0.6 1.0.1
Net_URL 1.0.14
Net_UserAgent_Detect 2.1.0
Net_Whois 1.0
tcpwrap 1.0
uuid 1.0
yaz 1.0.4
zeroconf 1.0
Date 1.4.3
DB 1.7.6 1.5.0RC1
DBA 1.1
dbx 1.1.0
DB_ado 1.3
DB_DataObject 1.7.15
DB_ldap 1.1.1
DB_NestedSet 1.2.4
DB_odbtp 1.0.3
DB_Pager 0.7
DB_QueryTool 1.0.1
DB_Table 1.2.1
ibm_db2 1.1.2
lchash 0.9.1
maxdb 7.5.00.26
MDB 1.3.0
MDB_QueryTool 1.0.1
mysql 1.0
oci8 1.0
odbtp 1.1.3
Paradox 1.3.0
SQLite 1.0.3
enchant 1.0
lzf 1.3
pdflib 2.0.4
ps 1.3.1
Text_Password 1.1.0
Text_Wiki 1.0.1
xdiff 1.3
File 1.2.2
File_Find 1.1.0
File_SearchReplace 1.0.1
xattr 1.0
fribidi 1.0
Translation 1.2.6pl1
FSM 1.2.2
Gtk_FileDrop 1.0.1
Gtk_ScrollingLabel 1.0.0
HTML_BBCodeParser 1.1
HTML_Common 1.2.2
HTML_Crypt 1.2.2
HTML_CSS 0.2.0
HTML_Form 1.2.0
HTML_Javascript 1.1.1
HTML_Menu 2.1.1
HTML_Progress 1.2.3
HTML_QuickForm 3.2.5
HTML_QuickForm_advmultiselect 1.0.0
HTML_QuickForm_Controller 1.0.4
HTML_Select_Common 1.1
HTML_Table 1.5
HTML_Table_Matrix 1.0.8
HTML_Template_Flexy 1.2.2
HTML_Template_IT 1.1.1
HTML_Template_PHPLIB 1.3.1
HTML_Template_Sigma 1.1.3
HTML_Template_Xipe 1.7.6
HTML_TreeMenu 1.2.0
Pager 2.3.4
Pager_Sliding 1.6
tidy 1.1
HTTP 1.3.6 1.2.1
HTTP_Client 1.0.0
HTTP_Download 1.0.0
HTTP_Header 1.1.2
HTTP_Request 1.2.4
HTTP_Upload 0.9.1
Image_Barcode 1.0.4
Image_Color 1.0.2
Image_GIS 1.1.1
Image_GraphViz 1.1.0
Image_IPTC 1.0.2
Log 1.8.7 1.8.7
Mail 1.1.9 1.1.1
mailparse 2.1.1
Mail_Mime 1.3.1
Mail_Queue 1.1.3
POP3 1.0.2
Numbers_Roman 0.2.0
PEAR 1.4.1 1.2.1
PEAR_Info 1.6.0
PEAR_PackageFileManager 1.5.2
PEAR_PackageFileManager_GUI_Gtk 1.0.1
PHPUnit 1.3.1
PHPUnit2 2.2.1
Science_Chemistry 1.1.0
Services_Weather 1.3.2 1.3.2
XML_RPC 1.4.3 1.0.4
Structures_Graph 1.0.1
Text_Statistics 1.0
System_Mount 1.0.0
xmlReader 1.0.1
xmlwriter 2.0.0
XML_Beautifier 1.1
XML_CSSML 1.1
XML_FastCreate 1.0.0
XML_fo2pdf 0.98
XML_HTMLSax 2.1.2
XML_image2svg 0.1
XML_NITF 1.0.1
XML_Parser 1.2.7 1.0.1
XML_RSS 0.9.2
XML_SVG 1.0.0
XML_Transformer 1.1.0
XML_Tree 1.1
XML_Util 1.1.1
XML_Wddx 1.0.1
Re: Horde Installation ... Fehler meldung
Posted: 2005-09-30 17:59
by stefanpropehan
Warning: main(PEAR.php): failed to open stream: No such file or directory in /srv/www/htdocs/confixx/html/mail/lib/core.php on line 26
Warning: main(): Failed opening 'PEAR.php' for inclusion (include_path='/srv/www/htdocs/confixx/html/mail/lib:.:/srv/www/htdocs /confixx/html/include:/srv/www/htdocs/confixx/html') in /srv/www/htdocs/confixx/html/mail/lib/core.php on line 26
Setze den "include_path" so, daß er auf das pear Verzeichnis zeigt!
--
Stefan
Re: Horde Installation ... Fehler meldung
Posted: 2005-10-01 09:00
by r00ty
hast du den safe_mode an ?
wenn ja vergiss es - du wärst der erste den ich kennenlerne der Horde mti safe_mode zum Laufen bekommt. Es soll theoretisch gehen, ja...
Re: Horde Installation ... Fehler meldung
Posted: 2005-10-01 10:57
by xamibor
r00ty wrote:hast du den safe_mode an ?
wenn ja vergiss es - du wärst der erste den ich kennenlerne der Horde mti safe_mode zum Laufen bekommt. Es soll theoretisch gehen, ja...
nein der ist off.
bzgl des pfad, ist das nicht etwas unlogisch, den pfad ausserhalb der config dati anzupassen?
ich hab keine möglichkeit gefunden den pfad zentral anzupassen.
gruß
Re: Horde Installation ... Fehler meldung
Posted: 2005-10-03 18:18
by r00ty
also mein
include_path (aus php.ini)
^^^ damit tut bei mir alles prima
Re: Horde Installation ... Fehler meldung
Posted: 2005-10-03 19:10
by xamibor
r00ty wrote:also mein
include_path (aus php.ini)
^^^ damit tut bei mir alles prima
Finde ich einen intressanten Ansatz. Ich bin leider zu unerfahren daher meine Frage, was für auswirkung kann diese einstellung haben?
Sollte das System nicht schon bei der installation des Server diese Einstellung Automatisch angepasst haben?
Wenn Pear installiert wird passt es dieses nicht an?
Ich will nur sichergehen da ich keine lust habe mein System zu zerstören....
Gruß
Re: Horde Installation ... Fehler meldung
Posted: 2005-10-04 09:39
by r00ty
also ein pear liegt in
/usr/share/php
wie sieht denn dein include path aus ?
Re: Horde Installation ... Fehler meldung
Posted: 2005-10-04 09:50
by xamibor
Wenn du diesen Abschnitt meinst:
Code: Select all
;;;;;;;;;;;;;;;;;;;;;;;;;
; Paths and Directories ;
;;;;;;;;;;;;;;;;;;;;;;;;;
; UNIX: "/path1:/path2"
;include_path = ".:/php/includes"
Diesen habe ich angepasst in:
Code: Select all
;;;;;;;;;;;;;;;;;;;;;;;;;
; Paths and Directories ;
;;;;;;;;;;;;;;;;;;;;;;;;;
; UNIX: "/path1:/path2"
include_path = ".:/php/share/php"
Es hat sich leider nichts geändert. :-(
Wo sollte ich noch nach schauen?
Re: Horde Installation ... Fehler meldung
Posted: 2005-10-04 12:59
by r00ty
also erstmal musste du rausfinden wo dein pear Verzeichnis wirklich ist
nachdem du die php.ini verändert hast musste den Apachen neustarten... (welche Distri hast du ?)
was sagt eigentlich phpinfo() zu deinem include_dir ?
Re: Horde Installation ... Fehler meldung
Posted: 2005-10-04 13:08
by xamibor
Die Abfrage hat ergeben:
Code: Select all
Configuration:
==============
PEAR executables directory bin_dir /usr/bin
PEAR documentation directory doc_dir /usr/share/php/doc
PHP extension directory ext_dir /usr/share/extensions/no-debug-non-
zts-20020429
PEAR directory php_dir /usr/share/php
PEAR Installer cache directory cache_dir /tmp/pear/cache
PEAR data directory data_dir /usr/share/php/data
PHP CLI/CGI binary php_bin /usr/bin/php
PEAR test directory test_dir /usr/share/php/test
Cache TimeToLive cache_ttl 3600
Preferred Package State preferred_state stable
Unix file mask umask 22
Debug Log Level verbose 1
HTTP Proxy Server Address http_proxy <not set>
PEAR server master_server pear.php.net
PEAR password (for password <not set>
maintainers)
Signature Handling Program sig_bin /usr/local/bin/gpg
Signature Key Directory sig_keydir /etc/pearkeys
Signature Key Id sig_keyid <not set>
Package Signature Type sig_type gpg
PEAR username (for username <not set>
maintainers)
Pear Scheint meinen kentnissen nach hier liegen:
Code: Select all
PEAR directory php_dir /usr/share/php
also ist der Eintrag richtig.
Apache hatte ich erfolgreich neu gestartet.
Ich habe eine Suse 9.0 Version zu laufen. (Apache 2, PHP Version 4.3.3, mysql-4.0.15-13)
btgl der phpinfo sende ich die eben ein PN.
Re: Horde Installation ... Fehler meldung
Posted: 2005-10-04 17:45
by r00ty
dein Problem wird aus der phpinfo ersichtlich:
Code: Select all
Directive |Local Value |Master Value
include_path |. |.:/php/share/php
irgendwo wird dein Master-Wert überschrieben. Vielleicht in der confixx_vhost ?
Re: Horde Installation ... Fehler meldung
Posted: 2005-10-05 13:03
by xamibor
das wird langsam intressant.
kann sich jemand vorstellen wie / wo confixx den Master-Wert überschreibt?
logisch wäre in de confixx_vhost ....
Re: Horde Installation ... Fehler meldung
Posted: 2005-10-05 13:40
by xamibor
Der confixx Support schreibt:
Code: Select all
in die "Httpd Spezial" von confixx den folgenden Eintrag hinzu:
php_admin_value include_path ".:/php/share/php:/user/home_dir"
Z.B:
php_admin_value include_path ".:/php/share/php:/home/www/confixx/html"
ich werde es heute abend nach der arbeit mal testen ... und ergebeniss mitteilen.
Re: Horde Installation ... Fehler meldung
Posted: 2005-11-04 20:13
by Anonymous
Bei mir läuft Horde mit confixx! Hier
http://forum.webhostlist.de/show/showthread.php?t=54278 gibt es eine interessante Anleitung, die beschreibt, wie man von IMP aus direkt auf die CONFIXX-SQL User/Emaildatenbank zugreifen kann!
Leider schon etwas älter! Und irgendwie klappert das bei mir nicht wie gewünscht!
Hat jemand Erfahrungen damit?
Danke
Re: Horde Installation ... Fehler meldung
Posted: 2005-11-08 22:17
by r00ty
ich hab dazu auch mal was geschrieben - das sollte eigentlich noch sehr analog zum aktuellen Horde/Imp laufen
http://www.rootforum.org/forum/viewtopi ... p&start=15
Re: Horde Installation ... Fehler meldung
Posted: 2006-03-06 09:30
by webside
Hallo Zusammen,
erstmal zu meinem System:
Debian
Apache 1.3.29
PHP 5.1.2
Confixx 3.1.2
Pear ist installiert
Ich habe das gleiche Problem wie go-Phoenix oben. Außerdem sagt mir Horde auf der test.php unten
Code: Select all
* PEAR Search Path (PHP's include_path): /var/www/web4/html/subdomains/webmail/lib:.
* PEAR: No
Check your PHP include_path setting to make sure it has the PEAR library directory.
Ich habe jetzt schon in der php.ini den Pear include_path gesetzt (/usr/lib/php-5.1.2/lib/php). Funktioniert auch nicht. Dann habe ich auch das open_base_dir in der vhost gesetzt. Geht auch nicht.
Weiß leider nicht, wie ich den Fehler beheben kann. Zumal der Eintrag der beim Pear Search Path steht nirgendwo so auftaucht.
Hat jemand eine Idee, woran es noch liegen könnte?
Danke im voraus
Re: Horde Installation ... Fehler meldung
Posted: 2006-03-06 09:47
by oxygen
Am Ende (wichtig) der httpd.conf folgender Eintrag (oÄ):
php_admin_value include_path .:/usr/share/php:/usr/lib/php/Smarty:/usr/lib/php/adodb
php_admin_value open_basedir /var/www:/usr/share/php:/usr/lib/php
Re: Horde Installation ... Fehler meldung
Posted: 2006-03-06 10:51
by webside
@øxygen
Wenn ich das von dir eintrage kommen, zusätzlich das pear noch nicht gefunden wird, folgende Fehlermeldungen:
Code: Select all
Warning: include_once() [function.include-once]: open_basedir restriction in effect. File(/usr/lib/php-5.1.2/lib/php/PEAR.php) is not within the allowed path(s): (/var/www/web4/html/:/var/www/web4/phptmp/:/var/www/web4/files/:/var/www/web4/atd/) in /var/www/web4/html/subdomains/webmail/lib/core.php on line 45
Warning: include_once(/usr/lib/php-5.1.2/lib/php/PEAR.php) [function.include-once]: failed to open stream: Operation not permitted in /var/www/web4/html/subdomains/webmail/lib/core.php on line 45
Warning: include_once() [function.include]: Failed opening '/usr/lib/php-5.1.2/lib/php/PEAR.php' for inclusion (include_path='/var/www/web4/html/subdomains/webmail/lib:.:/usr/lib/php-5.1.2/lib/php') in /var/www/web4/html/subdomains/webmail/lib/core.php on line 45
Warning: include_once() [function.include-once]: open_basedir restriction in effect. File(/usr/lib/php-5.1.2/lib/php/Log.php) is not within the allowed path(s): (/var/www/web4/html/:/var/www/web4/phptmp/:/var/www/web4/files/:/var/www/web4/atd/) in /var/www/web4/html/subdomains/webmail/lib/Horde.php on line 3
Warning: include_once(/usr/lib/php-5.1.2/lib/php/Log.php) [function.include-once]: failed to open stream: Operation not permitted in /var/www/web4/html/subdomains/webmail/lib/Horde.php on line 3
Warning: include_once() [function.include]: Failed opening '/usr/lib/php-5.1.2/lib/php/Log.php' for inclusion (include_path='/var/www/web4/html/subdomains/webmail/lib:.:/usr/lib/php-5.1.2/lib/php') in /var/www/web4/html/subdomains/webmail/lib/Horde.php on line 3
Warning: Cannot modify header information - headers already sent by (output started at /var/www/web4/html/subdomains/webmail/lib/core.php:45) in /var/www/web4/html/subdomains/webmail/lib/Test.php on line 84
Warning: Cannot modify header information - headers already sent by (output started at /var/www/web4/html/subdomains/webmail/lib/core.php:45) in /var/www/web4/html/subdomains/webmail/lib/Test.php on line 85
Hast du sonst noch eine Idee?
Gruß
Re: Horde Installation ... Fehler meldung
Posted: 2006-03-06 22:48
by oxygen
Warning: include_once() [function.include-once]: open_basedir restriction in effect. File(/usr/lib/php-5.1.2/lib/php/PEAR.php) is not within the allowed path(s): (/var/www/web4/html/:/var/www/web4/phptmp/:/var/www/web4/files/:/var/www/web4/atd/) in /var/www/web4/html/subdomains/webmail/lib/core.php on line 45
Das ist Confixx open_basedir Pfad und nicht der von:
php_admin_value open_basedir /var/www:/usr/share/php:/usr/lib/php
Also entweder hast du die Zeile nicht eingefügt oder nicht am Ende.
Hier müsste sie auch etwas anders lauten, nämlich:
php_admin_value open_basedir /var/www:/usr/lib/php-5.1.2