Domains bei schlund registrieren (sec Namensserver)
Posted: 2005-05-30 15:58
Hallo ich habe immer wieder das Problem wenn ich meine domains bei schlund registrieren will bzw die domains auf meinen Namensserver Primair und auf den sec von schlund
Ich nutze beide schlund server ns.schlund und slv2.schlund
Meine etc/Named.conf
Meine Zone
schlund schreibt mir
The domain mavcity.de has NOT been updated. The following errors were detected: == SERVER ns.wspcon.de. == Server: wspcon.de Address: 85.214.17.166 Query about mavcity.de for record types ANY Trying mavcity.de ... Nameserver wspcon.de not responding mavcity.de ANY record not found at wspcon.de, try again ns.wspcon.de.: NOT AUTHORITATIVE for the zone mavcity.de == END == == SERVER slv2.schlund.de. == Server: slv2.schlund.de Address: 212.227.123.29 Query about mavcity.de for record types ANY Trying mavcity.de ... Query failed, 0 answers, status: server failure mavcity.de ANY record not found at slv2.schlund.de, server failure slv2.schlund.de.: NOT AUTHORITATIVE for the zone mavcity.de == END == The servers don''t have all the same primary! Server ns.wspcon.de. is not authoritative! Server slv2.schlund.de. is not authoritative!
wo habe ich da den fehler drin ?
Ich nutze beide schlund server ns.schlund und slv2.schlund
Meine etc/Named.conf
Code: Select all
# Copyright (c) 2001-2003 SuSE Linux AG, Nuernberg, Germany.
# All rights reserved.
#
# Author: Frank Bodammer, Lars Mueller <lmuelle@suse.de>
#
# /etc/named.conf
#
# This is a sample configuration file for the name server BIND 9. It works as
# a caching only name server without modification.
#
# A sample configuration for setting up your own domain can be found in
# /usr/share/doc/packages/bind9/sample-config.
#
# A description of all available options can be found in
# /usr/share/doc/packages/bind9/misc/options.
options {
# The directory statement defines the name server's working directory
directory "/var/lib/named";
# Write dump and statistics file to the log subdirectory. The
# pathenames are relative to the chroot jail.
dump-file "/var/log/named_dump.db";
statistics-file "/var/log/named.stats";
# The forwarders record contains a list of servers to which queries
# should be forwarded. Enable this line and modify the IP address to
# your provider's name server. Up to three servers may be listed.
#forwarders { 10.11.12.13; 10.11.12.14; };
# Enable the next entry to prefer usage of the name server declared in
# the forwarders section.
#forward first;
# The listen-on record contains a list of local network interfaces to
# listen on. Optionally the port can be specified. Default is to
# listen on all interfaces found on your system. The default port is
# 53.
#listen-on port 53 { 127.0.0.1; };
# The listen-on-v6 record enables or disables listening on IPv6
# interfaces. Allowed values are 'any' and 'none' or a list of
# addresses.
listen-on-v6 { any; };
# The next three statements may be needed if a firewall stands between
# the local server and the internet.
#query-source address * port 53;
#transfer-source * port 53;
#notify-source * port 53;
# The allow-query record contains a list of networks or IP addresses
# to accept and deny queries from. The default is to allow queries
# from all hosts.
#allow-query { 127.0.0.1; };
# If notify is set to yes (default), notify messages are sent to other
# name servers when the the zone data is changed. Instead of setting
# a global 'notify' statement in the 'options' section, a separate
# 'notify' can be added to each zone definition.
notify no;
allow-transfer { 195.20.224.97; 195.20.225.34; 212.227.123.29; ::ffff:195.20.224.97; ::ffff:195.20.225.34; ::ffff:212.227.123.29; };
allow-query {any; };
};
# To configure named's logging remove the leading '#' characters of the
# following examples.
#logging {
# # Log queries to a file limited to a size of 100 MB.
# channel query_logging {
# file "/var/log/named_querylog"
# versions 3 size 100M;
# print-time yes; // timestamp log entries
# };
# category queries {
# query_logging;
# };
#
# # Or log this kind alternatively to syslog.
# channel syslog_queries {
# syslog user;
# severity info;
# };
# category queries { syslog_queries; };
#
# # Log general name server errors to syslog.
# channel syslog_errors {
# syslog user;
# severity error;
# };
# category default { syslog_errors; };
#
# # Don't log lame server messages.
# category lame-servers { null; };
#};
# The following zone definitions don't need any modification. The first one
# is the definition of the root name servers. The second one defines
# localhost while the third defines the reverse lookup for localhost.
zone "localhost" in {
type master;
file "localhost.zone";
};
zone "0.0.127.in-addr.arpa" in {
type master;
file "127.0.0.zone";
};
zone "17.214.85.in-addr.arpa" in {
type master;
file "85.214.17.zone";
};
zone "." in {
type hint;
file "root.hint";
};
# Include the meta include file generated by SuSEconfig.named. This includes
# all files as configured in NAMED_CONF_INCLUDE_FILES from
# /etc/sysconfig/named
include "/etc/named.conf.include";
# You can insert further zone records for your own domains below or create
# single files in /etc/named.d/ and add the file names to
# NAMED_CONF_INCLUDE_FILES.
# See /usr/share/doc/packages/bind/README.SuSE for more details.
## CONFIXX
Include "/etc/named.confixx";
## /CONFIXXMeine Zone
Code: Select all
$TTL 1W
@ IN SOA ns.wspcon.de hostmaster@wspcon.de (
2005053002 ; serial (d. adams)
8H ; refresh
2H ; retry
1W ; expiry
12H ) ; minimum
IN NS ns.wspcon.de.
IN NS slv2.schlund.de.
IN A 85.214.17.166
* IN A 85.214.17.166
www IN A 85.214.17.166The domain mavcity.de has NOT been updated. The following errors were detected: == SERVER ns.wspcon.de. == Server: wspcon.de Address: 85.214.17.166 Query about mavcity.de for record types ANY Trying mavcity.de ... Nameserver wspcon.de not responding mavcity.de ANY record not found at wspcon.de, try again ns.wspcon.de.: NOT AUTHORITATIVE for the zone mavcity.de == END == == SERVER slv2.schlund.de. == Server: slv2.schlund.de Address: 212.227.123.29 Query about mavcity.de for record types ANY Trying mavcity.de ... Query failed, 0 answers, status: server failure mavcity.de ANY record not found at slv2.schlund.de, server failure slv2.schlund.de.: NOT AUTHORITATIVE for the zone mavcity.de == END == The servers don''t have all the same primary! Server ns.wspcon.de. is not authoritative! Server slv2.schlund.de. is not authoritative!
wo habe ich da den fehler drin ?