Postfix-Fehler authdaemon: s_connect() failed: Permission...

Postfix, QMail, Sendmail, Dovecot, Cyrus, Courier, Anti-Spam
web-gear
Posts: 59
Joined: 2003-03-15 00:25

Postfix-Fehler authdaemon: s_connect() failed: Permission...

Post by web-gear » 2005-05-30 14:32

Hallo zusammen,


nach umfangreichen Suchen und Versuchen hänge ich leider nach wie vor dabei fest, einen Mailserver mit virtuellen Mailboxen (Postfix inkl. SSL, Courier IMAP inkl. SSL, Maildrop, MySQL & SpamAssassin) aufzusetzen. Ich habe mich bei meinem Vorgehen an dem Howto
http://www.phparchitecture.com/howto_show.php?id=2
orientiert, ergänzt durch einen dazugehöreigen FAQ unter
http://wiki.arslinux.com/Mail_Server:My ... entication
Ich verwende SuSE Linux Professional 9.2.

Wie scheinbar auch andere die es mit diesem FAQ versucht haben kann ich an mein versuchsweise angelegtes Postfach (welches mit dem Befehl "maildirmake" erstellt wurde) keine Mails schicken. Ich erhalte immer folgende Fehlermeldung:
May 30 12:01:40 linux postfix/pipe[10652]: 2F3B9DA383: to=<test@domain.net>, relay=maildrop, delay=2, status=bounced (user unknown. Command output: ERR: authdaemon: s_connect() failed: Permission denied Invalid user specified. )
(Anmerkung: test@domain.net ist hier und in folgenden Auszügen natürlich Platzhalter für die korrekte Mailadresse, das habe ich nur für diesen Post ausgetauscht.)

Was tadellos funktioniert (nur dass ich bis jetzt natürlich keine Mails abrufen konnte), ist das Checken des Postfachs via IMAP sowie POP3. Hier klappt der Login einwandfrei, so wie es aussieht:
May 30 13:32:50 linux authdaemond: received auth request, service=pop3, authtype=login
May 30 13:32:50 linux authdaemond: authmysql: trying this module
May 30 13:32:50 linux authdaemond: SQL query: SELECT msb_username, msb_password, msb_password_clear, msb_uid, msb_gid, msb_homedir, msb_maildir, "", msb_name, "" FROM ms_mailboxes WHERE msb_username = "test@domain.net" AND (msb_active_system=1)
May 30 13:32:50 linux authdaemond: password matches successfully
May 30 13:32:50 linux authdaemond: authmysql: sysusername=<null>, sysuserid=1004, sysgroupid=1004, homedir=/srv/mail, address=test@domain.net, fullname=<null>, maildir=00001005/, quota=<null>, options=<null>
May 30 13:32:50 linux authdaemond: authmysql: clearpasswd=test, passwd=$1$339492d5$Tr2cwmLcMOnKvWcDRwdqa1
May 30 13:32:50 linux authdaemond: Authenticated: sysusername=<null>, sysuserid=1004, sysgroupid=1004, homedir=/srv/mail, address=test@domain.net, fullname=<null>, maildir=00001005/, quota=<null>, options=<null>
May 30 13:32:50 linux authdaemond: Authenticated: clearpasswd=test, passwd=$1$339492d5$Tr2cwmLcMOnKvWcDRwdqa1
(Anmerkung: ich habe DEBUG überall wo ich es aktivieren konnte aktiviert, deswegen werden auch die Passwörter im Klartext geloggt)

Nachdem die Tipps des FAQ's (http://wiki.arslinux.com/Mail_Server:My ... entication) bei mir das Problem nicht behoben habe, und ich alle Konfigurationen zigmal überprüft habe, möhcte ich fragen, ob vielleicht hier jemand weiß woran es liegen könnte.

Zunächst noch ein Auszug aus meinem MySQL-Log:
050528 19:17:09 1 Connect mailsystem@localhost on mailsystem
1 Query SELECT msd_transport FROM ms_domains WHERE msd_domain='*'
1 Query SELECT msd_transport FROM ms_domains WHERE msd_domain='*'
1 Query SELECT msd_transport FROM ms_domains WHERE msd_domain='absenderdomain.de'
2 Connect mailsystem@localhost on mailsystem
2 Query SELECT msv_goto FROM ms_virtual WHERE msv_address='absenderdomain.de'
3 Connect mailsystem@localhost on mailsystem
3 Query SELECT msb_maildir FROM ms_mailboxes WHERE msb_username='absenderdomain.de' AND msb_active_system=1 AND msb_active_user=1
1 Query SELECT msd_transport FROM ms_domains WHERE msd_domain='absenderdomain.de'
1 Query SELECT msd_transport FROM ms_domains WHERE msd_domain='de'
1 Query SELECT msd_transport FROM ms_domains WHERE msd_domain='absender@absenderdomain.de'
1 Query SELECT msd_transport FROM ms_domains WHERE msd_domain='absenderdomain.de'
1 Query SELECT msd_transport FROM ms_domains WHERE msd_domain='.de'
4 Connect mailsystem@localhost on mailsystem
4 Query SELECT msr_goto FROM ms_relocations WHERE msr_address='absender@absenderdomain.de'
1 Query SELECT msd_transport FROM ms_domains WHERE msd_domain='absenderdomain.de'
4 Query SELECT msr_goto FROM ms_relocations WHERE msr_address='@absenderdomain.de'
050528 19:17:14 1 Query SELECT msd_transport FROM ms_domains WHERE msd_domain='domain.net'
2 Query SELECT msv_goto FROM ms_virtual WHERE msv_address='domain.net'
3 Query SELECT msb_maildir FROM ms_mailboxes WHERE msb_username='domain.net' AND msb_active_system=1 AND msb_active_user=1
1 Query SELECT msd_transport FROM ms_domains WHERE msd_domain='test@domain.net'
1 Query SELECT msd_transport FROM ms_domains WHERE msd_domain='domain.net'
4 Query SELECT msr_goto FROM ms_relocations WHERE msr_address='test@domain.net'
1 Query SELECT msd_transport FROM ms_domains WHERE msd_domain='domain.net'
4 Query SELECT msr_goto FROM ms_relocations WHERE msr_address='test'
4 Query SELECT msr_goto FROM ms_relocations WHERE msr_address='@domain.net'
5 Connect mailsystem@localhost on mailsystem
5 Query SELECT msc_access FROM ms_access WHERE msc_source='localhost' AND msc_type='client'
5 Query SELECT msc_access FROM ms_access WHERE msc_source='127.0.0.1' AND msc_type='client'
5 Query SELECT msc_access FROM ms_access WHERE msc_source='127.0.0' AND msc_type='client'
5 Query SELECT msc_access FROM ms_access WHERE msc_source='127.0' AND msc_type='client'
5 Query SELECT msc_access FROM ms_access WHERE msc_source='127' AND msc_type='client'
6 Connect mailsystem@localhost on mailsystem
6 Query SELECT msc_access FROM ms_access WHERE msc_source='absender@absenderdomain.de' AND msc_type='sender'
6 Query SELECT msc_access FROM ms_access WHERE msc_source='absenderdomain.de' AND msc_type='sender'
6 Query SELECT msc_access FROM ms_access WHERE msc_source='de' AND msc_type='sender'
6 Query SELECT msc_access FROM ms_access WHERE msc_source='absender@' AND msc_type='sender'
7 Connect mailsystem@localhost on mailsystem
7 Query SELECT msd_transport FROM ms_domains WHERE msd_domain='domain.net'
7 Query SELECT msd_transport FROM ms_domains WHERE msd_domain='domain.net'
8 Connect mailsystem@localhost on mailsystem
8 Query SELECT msv_goto FROM ms_virtual WHERE msv_address='test@domain.net'
7 Query SELECT msd_transport FROM ms_domains WHERE msd_domain='domain.net'
8 Query SELECT msv_goto FROM ms_virtual WHERE msv_address='test'
8 Query SELECT msv_goto FROM ms_virtual WHERE msv_address='@domain.net'
9 Connect mailsystem@localhost on mailsystem
9 Query SELECT msa_goto FROM ms_aliases WHERE msa_address='test@domain.net'
10 Connect mailsystem@localhost on mailsystem
10 Query SELECT msb_maildir FROM ms_mailboxes WHERE msb_username='test@domain.net' AND msb_active_system=1 AND msb_active_user=1
11 Connect mailsystem@localhost on mailsystem
11 Query SELECT msv_goto FROM ms_virtual WHERE msv_address='test@domain.net'
12 Connect mailsystem@localhost on mailsystem
12 Query SELECT msd_transport FROM ms_domains WHERE msd_domain='domain.net'
11 Query SELECT msv_goto FROM ms_virtual WHERE msv_address='test'
11 Query SELECT msv_goto FROM ms_virtual WHERE msv_address='@domain.net'
050528 19:17:18 1 Query SELECT msd_transport FROM ms_domains WHERE msd_domain='domain.net'
2 Query SELECT msv_goto FROM ms_virtual WHERE msv_address='domain.net'
3 Query SELECT msb_maildir FROM ms_mailboxes WHERE msb_username='domain.net' AND msb_active_system=1 AND msb_active_user=1
1 Query SELECT msd_transport FROM ms_domains WHERE msd_domain='test@domain.net'
1 Query SELECT msd_transport FROM ms_domains WHERE msd_domain='domain.net'
4 Query SELECT msr_goto FROM ms_relocations WHERE msr_address='test@domain.net'
1 Query SELECT msd_transport FROM ms_domains WHERE msd_domain='domain.net'
4 Query SELECT msr_goto FROM ms_relocations WHERE msr_address='test'
4 Query SELECT msr_goto FROM ms_relocations WHERE msr_address='@domain.net'
11 Query SELECT msv_goto FROM ms_virtual WHERE msv_address='absender@absenderdomain.de'
12 Query SELECT msd_transport FROM ms_domains WHERE msd_domain='absenderdomain.de'
11 Query SELECT msv_goto FROM ms_virtual WHERE msv_address='@absenderdomain.de'
1 Query SELECT msd_transport FROM ms_domains WHERE msd_domain='absenderdomain.de'
2 Query SELECT msv_goto FROM ms_virtual WHERE msv_address='absenderdomain.de'
3 Query SELECT msb_maildir FROM ms_mailboxes WHERE msb_username='absenderdomain.de' AND msb_active_system=1 AND msb_active_user=1
1 Query SELECT msd_transport FROM ms_domains WHERE msd_domain='absenderdomain.de'
1 Query SELECT msd_transport FROM ms_domains WHERE msd_domain='de'
1 Query SELECT msd_transport FROM ms_domains WHERE msd_domain='absender@absenderdomain.de'
1 Query SELECT msd_transport FROM ms_domains WHERE msd_domain='absenderdomain.de'
1 Query SELECT msd_transport FROM ms_domains WHERE msd_domain='.de'
4 Query SELECT msr_goto FROM ms_relocations WHERE msr_address='absender@absenderdomain.de'
1 Query SELECT msd_transport FROM ms_domains WHERE msd_domain='absenderdomain.de'
4 Query SELECT msr_goto FROM ms_relocations WHERE msr_address='@absenderdomain.de'
(Anmerkung: absender@absenderdomain.de ist die Adresse die als Absender angegeben hatte, test@domain.net wie gehabt die Adresse des Postfachs)

Hier noch die Konfigurationsdateien:

/usr/local/courier/etc/authdaemonrc

Code: Select all

##VERSION: $Id: authdaemonrc.in,v 1.11 2005/03/20 19:58:55 mrsam Exp $
#
# Copyright 2000-2005 Double Precision, Inc.  See COPYING for
# distribution information.
#
# authdaemonrc created from authdaemonrc.dist by sysconftool
#
# Do not alter lines that begin with ##, they are used when upgrading
# this configuration.
#
# This file configures authdaemond, the resident authentication daemon.
#
# Comments in this file are ignored.  Although this file is intended to
# be sourced as a shell script, authdaemond parses it manually, so
# the acceptable syntax is a bit limited.  Multiline variable contents,
# with the  continuation character, are not allowed.  Everything must
# fit on one line.  Do not use any additional whitespace for indentation,
# or anything else.

##NAME: authmodulelist:2
#
# The authentication modules that are linked into authdaemond.  The
# default list is installed.  You may selectively disable modules simply
# by removing them from the following list.  The available modules you
# can use are: authuserdb authpwd authshadow authmysql authcustom authpipe

#authmodulelist="authuserdb authpwd authshadow authmysql authcustom authpipe"
authmodulelist="authmysql authpam"

##NAME: authmodulelistorig:3
#
# This setting is used by Courier's webadmin module, and should be left
# alone

authmodulelistorig="authuserdb authpwd authshadow authmysql authcustom authpipe"

##NAME: daemons:0
#
# The number of daemon processes that are started.  authdaemon is typically
# installed where authentication modules are relatively expensive: such
# as authldap, or authmysql, so it's better to have a number of them running.
# PLEASE NOTE:  Some platforms may experience a problem if there's more than
# one daemon.  Specifically, SystemV derived platforms that use TLI with
# socket emulation.  I'm suspicious of TLI's ability to handle multiple
# processes accepting connections on the same filesystem domain socket.
#
# You may need to increase daemons if as your system load increases.  Symptoms
# include sporadic authentication failures.  If you start getting
# authentication failures, increase daemons.  However, the default of 5
# SHOULD be sufficient.  Bumping up daemon count is only a short-term
# solution.  The permanent solution is to add more resources: RAM, faster
# disks, faster CPUs...

daemons=5

##NAME: authdaemonvar:2
#
# authdaemonvar is here, but is not used directly by authdaemond.  It's
# used by various configuration and build scripts, so don't touch it!

authdaemonvar=/usr/local/var/spool/authdaemon

##NAME: DEBUG_LOGIN:0
#
# Dump additional diagnostics to syslog
#
# DEBUG_LOGIN=0   - turn off debugging
# DEBUG_LOGIN=1   - turn on debugging
# DEBUG_LOGIN=2   - turn on debugging + log passwords too
#
# ** YES ** - DEBUG_LOGIN=2 places passwords into syslog.
#
# Note that most information is sent to syslog at level 'debug', so
# you may need to modify your /etc/syslog.conf to be able to see it.

DEBUG_LOGIN=2

##NAME: DEFAULTOPTIONS:0
#
# A comma-separated list of option=value pairs. Each option is applied
# to an account if the account does not have its own specific value for
# that option. So for example, you can set
#   DEFAULTOPTIONS="disablewebmail=1,disableimap=1"
# and then enable webmail and/or imap on individual accounts by setting
# disablewebmail=0 and/or disableimap=0 on the account.

DEFAULTOPTIONS=""

/usr/local/courier/etc/authmysqlrc

Code: Select all

##VERSION: $Id: authmysqlrc,v 1.18 2004/11/14 02:58:16 mrsam Exp $
#
# Copyright 2000-2004 Double Precision, Inc.  See COPYING for
# distribution information.
#
# Do not alter lines that begin with ##, they are used when upgrading
# this configuration.
#
# authmysqlrc created from authmysqlrc.dist by sysconftool
#
# DO NOT INSTALL THIS FILE with world read permissions.  This file
# might contain the MySQL admin password!
#
# Each line in this file must follow the following format:
#
# field[spaces|tabs]value
#
# That is, the name of the field, followed by spaces or tabs, followed by
# field value.  Trailing spaces are prohibited.


##NAME: LOCATION:0
#
# The server name, userid, and password used to log in.

MYSQL_SERVER            localhost
MYSQL_USERNAME          mailsystem
MYSQL_PASSWORD          mysqlpasswort

##NAME: MYSQL_SOCKET:0
#
# MYSQL_SOCKET can be used with MySQL version 3.22 or later, it specifies the
# filesystem pipe used for the connection
#
MYSQL_SOCKET            /var/lib/mysql/mysql.sock

##NAME: MYSQL_PORT:0
#
# MYSQL_PORT can be used with MySQL version 3.22 or later to specify a port to
# connect to.

MYSQL_PORT              0

##NAME: MYSQL_OPT:0
#
# Leave MYSQL_OPT as 0, unless you know what you're doing.

MYSQL_OPT               0

##NAME: MYSQL_DATABASE:0
#
# The name of the MySQL database we will open:

MYSQL_DATABASE          mailsystem

##NAME: MYSQL_USER_TABLE:0
#
# The name of the table containing your user data.  See README.authmysqlrc
# for the required fields in this table.

MYSQL_USER_TABLE        ms_mailboxes

##NAME: MYSQL_CRYPT_PWFIELD:0
#
# Either MYSQL_CRYPT_PWFIELD or MYSQL_CLEAR_PWFIELD must be defined.  Both
# are OK too. crypted passwords go into MYSQL_CRYPT_PWFIELD, cleartext
# passwords go into MYSQL_CLEAR_PWFIELD.  Cleartext passwords allow
# CRAM-MD5 authentication to be implemented.

MYSQL_CRYPT_PWFIELD     msb_password

##NAME: MYSQL_CLEAR_PWFIELD:0
#
#
MYSQL_CLEAR_PWFIELD     msb_password_clear

##NAME: MYSQL_DEFAULT_DOMAIN:0
#
# If DEFAULT_DOMAIN is defined, and someone tries to log in as 'user',
# we will look up 'user@DEFAULT_DOMAIN' instead.
#
#
# DEFAULT_DOMAIN                example.com

##NAME: MYSQL_UID_FIELD:0
#
# Other fields in the mysql table:
#
# MYSQL_UID_FIELD - contains the numerical userid of the account
#
MYSQL_UID_FIELD         msb_uid

##NAME: MYSQL_GID_FIELD:0
#
# Numerical groupid of the account

MYSQL_GID_FIELD         msb_gid

##NAME: MYSQL_LOGIN_FIELD:0
#
# The login id, default is id.  Basically the query is:
#
#  SELECT MYSQL_UID_FIELD, MYSQL_GID_FIELD, ... WHERE id='loginid'
#

MYSQL_LOGIN_FIELD       msb_username

##NAME: MYSQL_HOME_FIELD:0
#

MYSQL_HOME_FIELD        msb_homedir

##NAME: MYSQL_NAME_FIELD:0
#
# The user's name (optional)

MYSQL_NAME_FIELD        msb_name

##NAME: MYSQL_MAILDIR_FIELD:0
#
# This is an optional field, and can be used to specify an arbitrary
# location of the maildir for the account, which normally defaults to
# $HOME/Maildir (where $HOME is read from MYSQL_HOME_FIELD).
#
# You still need to provide a MYSQL_HOME_FIELD, even if you uncomment this
# out.
#
MYSQL_MAILDIR_FIELD     msb_maildir

##NAME: MYSQL_DEFAULTDELIVERY:0
#
# Courier mail server only: optional field specifies custom mail delivery
# instructions for this account (if defined) -- essentially overrides
# DEFAULTDELIVERY from ${sysconfdir}/courierd
#
# MYSQL_DEFAULTDELIVERY defaultdelivery

##NAME: MYSQL_QUOTA_FIELD:0
#
# Define MYSQL_QUOTA_FIELD to be the name of the field that can optionally
# specify a maildir quota.  See README.maildirquota for more information
#
# MYSQL_QUOTA_FIELD     quota

##NAME: MYSQL_AUXOPTIONS:0
#
# Auxiliary options.  The MYSQL_AUXOPTIONS field should be a char field that
# contains a single string consisting of comma-separated "ATTRIBUTE=NAME"
# pairs.  These names are additional attributes that define various per-account
# "options", as given in INSTALL's description of the "Account OPTIONS"
# setting.
#
# MYSQL_AUXOPTIONS_FIELD        auxoptions
#
# You might want to try something like this, if you'd like to use a bunch
# of individual fields, instead of a single text blob:
#
# MYSQL_AUXOPTIONS_FIELD        CONCAT("disableimap=",disableimap,",disablepop3=",disablepop3,",disablewebmail=",disablewebmail,",sharedgroup=",sharedgroup)
#
# This will let you define fields called "disableimap", etc, with the end result
# being something that the OPTIONS parser understands.


##NAME: MYSQL_WHERE_CLAUSE:0
#
# This is optional, MYSQL_WHERE_CLAUSE can be basically set to an arbitrary
# fixed string that is appended to the WHERE clause of our query
#
MYSQL_WHERE_CLAUSE      msb_active_system=1

##NAME: MYSQL_SELECT_CLAUSE:0
#
# (EXPERIMENTAL)
# This is optional, MYSQL_SELECT_CLAUSE can be set when you have a database,
# which is structuraly different from proposed. The fixed string will
# be used to do a SELECT operation on database, which should return fields
# in order specified bellow:
#
# username, cryptpw, clearpw, uid, gid, home, maildir, quota, fullname, options
#
# The username field should include the domain (see example below).
#
# Enabling this option causes ignorance of any other field-related
# options, excluding default domain.
#
# There are two variables, which you can use. Substitution will be made
# for them, so you can put entered username (local part) and domain name
# in the right place of your query. These variables are:
#               $(local_part), $(domain), $(service)
#
# If a $(domain) is empty (not given by the remote user) the default domain
# name is used in its place.
#
# $(service) will expand out to the service being authenticated: imap, imaps,
# pop3 or pop3s.  Courier mail server only: service will also expand out to
# "courier", when searching for local mail account's location.  In this case,
# if the "maildir" field is not empty it will be used in place of
# DEFAULTDELIVERY.  Courier mail server will also use esmtp when doing
# authenticated ESMTP.
#
# This example is a little bit modified adaptation of vmail-sql
# database scheme:
#
# MYSQL_SELECT_CLAUSE   SELECT CONCAT(popbox.local_part, '@', popbox.domain_name),                      
#                       CONCAT('{MD5}', popbox.password_hash),          
#                       popbox.clearpw,                                 
#                       domain.uid,                                     
#                       domain.gid,                                     
#                       CONCAT(domain.path, '/', popbox.mbox_name),     
#                       '',                                             
#                       domain.quota,                                   
#                       '',                                             
#                       CONCAT("disableimap=",disableimap,",disablepop3=",    
#                              disablepop3,",disablewebmail=",disablewebmail, 
#                              ",sharedgroup=",sharedgroup)             
#                       FROM popbox, domain                             
#                       WHERE popbox.local_part = '$(local_part)'       
#                       AND popbox.domain_name = '$(domain)'            
#                       AND popbox.domain_name = domain.domain_name


##NAME: MYSQL_ENUMERATE_CLAUSE:1
#
# {EXPERIMENTAL}
# Optional custom SQL query used to enumerate accounts for authenumerate,
# in order to compile a list of accounts for shared folders.  The query
# should return the following fields: name, uid, gid, homedir, maildir, options
#
# Example:
# MYSQL_ENUMERATE_CLAUSE        SELECT CONCAT(popbox.local_part, '@', popbox.domain_name),                      
#                       domain.uid,                                     
#                       domain.gid,                                     
#                       CONCAT(domain.path, '/', popbox.mbox_name),     
#                       '',                                             
#                       CONCAT('sharedgroup=', sharedgroup)             
#                       FROM popbox, domain                             
#                       WHERE popbox.local_part = '$(local_part)'       
#                       AND popbox.domain_name = '$(domain)'            
#                       AND popbox.domain_name = domain.domain_name



##NAME: MYSQL_CHPASS_CLAUSE:0
#
# (EXPERIMENTAL)
# This is optional, MYSQL_CHPASS_CLAUSE can be set when you have a database,
# which is structuraly different from proposed. The fixed string will
# be used to do an UPDATE operation on database. In other words, it is
# used, when changing password.
#
# There are four variables, which you can use. Substitution will be made
# for them, so you can put entered username (local part) and domain name
# in the right place of your query. There variables are:
#       $(local_part) , $(domain) , $(newpass) , $(newpass_crypt)
#
# If a $(domain) is empty (not given by the remote user) the default domain
# name is used in its place.
# $(newpass) contains plain password
# $(newpass_crypt) contains its crypted form
#
# MYSQL_CHPASS_CLAUSE   UPDATE  popbox                                  
#                       SET     clearpw='$(newpass)',                   
#                               password_hash='$(newpass_crypt)'        
#                       WHERE   local_part='$(local_part)'              
#                       AND     domain_name='$(domain)'
#

/usr/local/courier/etc/maildropmysql.config

Code: Select all

hostname             localhost
socket               /var/lib/mysql/mysql.sock
port                 3306
database             mailsystem
dbuser               mailsystem
dbpw                 mysqlpasswort
dbtable              ms_mailboxes
default_uidnumber    1004
default_gidnumber    1004
uid_field            msb_username
uidnumber_field      msb_uid
gidnumber_field      msb_gid
maildir_field        msb_maildir
homedirectory_field  msb_homedir
quota_field          msb_quota
# unused for now, but needs to be a valid field.
mailstatus_field     msb_postfix
where_clause         AND msb_postfix='Y'
/etc/postfix/main.cf

Code: Select all

#
# -----------------------------------------------------------------------
# NOTE: Many parameters have already been added to the end of this file
#       by SuSEconfig.postfix. So take care that you don't uncomment
#       and set a parameter without checking whether it has been added
#       to the end of this file.
# -----------------------------------------------------------------------
#
# Global Postfix configuration file. This file lists only a subset
# of all 300+ parameters. See the postconf(5) manual page for a
# complete list.
#
# The general format of each line is: parameter = value. Lines
# that begin with whitespace continue the previous line. A value can
# contain references to other $names or ${name}s.
#
# NOTE - CHANGE NO MORE THAN 2-3 PARAMETERS AT A TIME, AND TEST IF
# POSTFIX STILL WORKS AFTER EVERY CHANGE.

# SOFT BOUNCE
#
# The soft_bounce parameter provides a limited safety net for
# testing.  When soft_bounce is enabled, mail will remain queued that
# would otherwise bounce. This parameter disables locally-generated
# bounces, and prevents the SMTP server from rejecting mail permanently
# (by changing 5xx replies into 4xx replies). However, soft_bounce
# is no cure for address rewriting mistakes or mail routing mistakes.
#
#soft_bounce = no

# LOCAL PATHNAME INFORMATION
#
# The queue_directory specifies the location of the Postfix queue.
# This is also the root directory of Postfix daemons that run chrooted.
# See the files in examples/chroot-setup for setting up Postfix chroot
# environments on different UNIX systems.
#
queue_directory = /var/spool/postfix

# The command_directory parameter specifies the location of all
# postXXX commands.
#
command_directory = /usr/sbin

# The daemon_directory parameter specifies the location of all Postfix
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
#
daemon_directory = /usr/lib/postfix

# QUEUE AND PROCESS OWNERSHIP
#
# The mail_owner parameter specifies the owner of the Postfix queue
# and of most Postfix daemon processes.  Specify the name of a user
# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM.  In
# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
# USER.
#
mail_owner = postfix

# The default_privs parameter specifies the default rights used by
# the local delivery agent for delivery to external file or command.
# These rights are used in the absence of a recipient user context.
# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
#
#default_privs = nobody

# INTERNET HOST AND DOMAIN NAMES
#
# The myhostname parameter specifies the internet hostname of this
# mail system. The default is to use the fully-qualified domain name
# from gethostname(). $myhostname is used as a default value for many
# other configuration parameters.
#
#myhostname = host.domain.tld
#myhostname = virtual.domain.tld
myhostname = mail.mailserverdomain.net

# The mydomain parameter specifies the local internet domain name.
# The default is to use $myhostname minus the first component.
# $mydomain is used as a default value for many other configuration
# parameters.
#
mydomain = mailserverdomain.net

# SENDING MAIL
#
# The myorigin parameter specifies the domain that locally-posted
# mail appears to come from. The default is to append $myhostname,
# which is fine for small sites.  If you run a domain with multiple
# machines, you should (1) change this to $mydomain and (2) set up
# a domain-wide alias database that aliases each user to
# user@that.users.mailhost.
#
# For the sake of consistency between sender and recipient addresses,
# myorigin also specifies the default domain name that is appended
# to recipient addresses that have no @domain part.
#
#myorigin = $myhostname
myorigin = $mydomain

# RECEIVING MAIL

# The inet_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on.  By default,
# the software claims all active interfaces on the machine. The
# parameter also controls delivery of mail to user@[ip.address].
#
# See also the proxy_interfaces parameter, for network addresses that
# are forwarded to us via a proxy or network address translator.
#
# Note: you need to stop/start Postfix when this parameter changes.
#
inet_interfaces = all
#inet_interfaces = $myhostname
#inet_interfaces = $myhostname, localhost

# The proxy_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on by way of a
# proxy or network address translation unit. This setting extends
# the address list specified with the inet_interfaces parameter.
#
# You must specify your proxy/NAT addresses when your system is a
# backup MX host for other domains, otherwise mail delivery loops
# will happen when the primary MX host is down.
#
#proxy_interfaces =
#proxy_interfaces = 1.2.3.4

# The mydestination parameter specifies the list of domains that this
# machine considers itself the final destination for.
#
# These domains are routed to the delivery agent specified with the
# local_transport parameter setting. By default, that is the UNIX
# compatible delivery agent that lookups all recipients in /etc/passwd
# and /etc/aliases or their equivalent.
#
# The default is $myhostname + localhost.$mydomain.  On a mail domain
# gateway, you should also include $mydomain.
#
# Do not specify the names of virtual domains - those domains are
# specified elsewhere (see VIRTUAL_README).
#
# Do not specify the names of domains that this machine is backup MX
# host for. Specify those names via the relay_domains settings for
# the SMTP server, or use permit_mx_backup if you are lazy (see
# STANDARD_CONFIGURATION_README).
#
# The local machine is always the final destination for mail addressed
# to user@[the.net.work.address] of an interface that the mail system
# receives mail on (see the inet_interfaces parameter).
#
# Specify a list of host or domain names, /file/name or type:table
# patterns, separated by commas and/or whitespace. A /file/name
# pattern is replaced by its contents; a type:table is matched when
# a name matches a lookup key (the right-hand side is ignored).
# Continue long lines by starting the next line with whitespace.
#
# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
#
#mydestination = $myhostname, localhost.$mydomain, localhost
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
#       mail.$mydomain, www.$mydomain, ftp.$mydomain
mydestination = mailserverdomain.net, $transport_maps

# REJECTING MAIL FOR UNKNOWN LOCAL USERS
#
# The local_recipient_maps parameter specifies optional lookup tables
# with all names or addresses of users that are local with respect
# to $mydestination, $inet_interfaces or $proxy_interfaces.
#
# If this parameter is defined, then the SMTP server will reject
# mail for unknown local users. This parameter is defined by default.
#
# To turn off local recipient checking in the SMTP server, specify
# local_recipient_maps = (i.e. empty).
#
# The default setting assumes that you use the default Postfix local
# delivery agent for local delivery. You need to update the
# local_recipient_maps setting if:
#
# - You define $mydestination domain recipients in files other than
#   /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
#   For example, you define $mydestination domain recipients in
#   the $virtual_mailbox_maps files.
#
# - You redefine the local delivery agent in master.cf.
#
# - You redefine the "local_transport" setting in main.cf.
#
# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
#   feature of the Postfix local delivery agent (see local(8)).
#
# Details are described in the LOCAL_RECIPIENT_README file.
#
# Beware: if the Postfix SMTP server runs chrooted, you probably have
# to access the passwd file via the proxymap service, in order to
# overcome chroot restrictions. The alternative, having a copy of
# the system passwd file in the chroot jail is just not practical.
#
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify a bare username, an @domain.tld
# wild-card, or specify a user@domain.tld address.
#
#local_recipient_maps = unix:passwd.byname $alias_maps
#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
#local_recipient_maps =
local_recipient_maps = $alias_maps $virtual_mailbox_maps unix:passwd.byname

# The unknown_local_recipient_reject_code specifies the SMTP server
# response code when a recipient domain matches $mydestination or
# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
# and the recipient address or address local-part is not found.
#
# The default setting is 550 (reject mail) but it is safer to start
# with 450 (try again later) until you are certain that your
# local_recipient_maps settings are OK.
#
unknown_local_recipient_reject_code = 550

# TRUST AND RELAY CONTROL

# The mynetworks parameter specifies the list of "trusted" SMTP
# clients that have more privileges than "strangers".
#
# In particular, "trusted" SMTP clients are allowed to relay mail
# through Postfix.  See the smtpd_recipient_restrictions parameter
# in postconf(5).
#
# You can specify the list of "trusted" network addresses by hand
# or you can let Postfix do it for you (which is the default).
#
# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
# clients in the same IP subnetworks as the local machine.
# On Linux, this does works correctly only with interfaces specified
# with the "ifconfig" command.
#
# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
# clients in the same IP class A/B/C networks as the local machine.
# Don't do this with a dialup site - it would cause Postfix to "trust"
# your entire provider's network.  Instead, specify an explicit
# mynetworks list by hand, as described below.
#
# Specify "mynetworks_style = host" when Postfix should "trust"
# only the local machine.
#
#mynetworks_style = class
#mynetworks_style = subnet
#mynetworks_style = host

# Alternatively, you can specify the mynetworks list by hand, in
# which case Postfix ignores the mynetworks_style setting.
#
# Specify an explicit list of network/netmask patterns, where the
# mask specifies the number of bits in the network part of a host
# address.
#
# You can also specify the absolute pathname of a pattern file instead
# of listing the patterns here. Specify type:table for table-based lookups
# (the value on the table right-hand side is not used).
#
#mynetworks = 168.100.189.0/28, 127.0.0.0/8
#mynetworks = $config_directory/mynetworks
#mynetworks = hash:/etc/postfix/network_table

# The relay_domains parameter restricts what destinations this system will
# relay mail to.  See the smtpd_recipient_restrictions description in
# postconf(5) for detailed information.
#
# By default, Postfix relays mail
# - from "trusted" clients (IP address matches $mynetworks) to any destination,
# - from "untrusted" clients to destinations that match $relay_domains or
#   subdomains thereof, except addresses with sender-specified routing.
# The default relay_domains value is $mydestination.
#
# In addition to the above, the Postfix SMTP server by default accepts mail
# that Postfix is final destination for:
# - destinations that match $inet_interfaces or $proxy_interfaces,
# - destinations that match $mydestination
# - destinations that match $virtual_alias_domains,
# - destinations that match $virtual_mailbox_domains.
# These destinations do not need to be listed in $relay_domains.
#
# Specify a list of hosts or domains, /file/name patterns or type:name
# lookup tables, separated by commas and/or whitespace.  Continue
# long lines by starting the next line with whitespace. A file name
# is replaced by its contents; a type:name table is matched when a
# (parent) domain appears as lookup key.
#
# NOTE: Postfix will not automatically forward mail for domains that
# list this system as their primary or backup MX host. See the
# permit_mx_backup restriction description in postconf(5).
#
#relay_domains = $mydestination

# INTERNET OR INTRANET

# The relayhost parameter specifies the default host to send mail to
# when no entry is matched in the optional transport(5) table. When
# no relayhost is given, mail is routed directly to the destination.
#
# On an intranet, specify the organizational domain name. If your
# internal DNS uses no MX records, specify the name of the intranet
# gateway host instead.
#
# In the case of SMTP, specify a domain, host, host:port, [host]:port,
# [address] or [address]:port; the form [host] turns off MX lookups.
#
# If you're connected via UUCP, see also the default_transport parameter.
#
#relayhost = $mydomain
#relayhost = [gateway.my.domain]
#relayhost = [mailserver.isp.tld]
#relayhost = uucphost
#relayhost = [an.ip.add.ress]

# REJECTING UNKNOWN RELAY USERS
#
# The relay_recipient_maps parameter specifies optional lookup tables
# with all addresses in the domains that match $relay_domains.
#
# If this parameter is defined, then the SMTP server will reject
# mail for unknown relay users. This feature is off by default.
#
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify an @domain.tld wild-card, or specify
# a user@domain.tld address.
#
#relay_recipient_maps = hash:/etc/postfix/relay_recipients

# INPUT RATE CONTROL
#
# The in_flow_delay configuration parameter implements mail input
# flow control. This feature is turned on by default, although it
# still needs further development (it's disabled on SCO UNIX due
# to an SCO bug).
#
# A Postfix process will pause for $in_flow_delay seconds before
# accepting a new message, when the message arrival rate exceeds the
# message delivery rate. With the default 100 SMTP server process
# limit, this limits the mail inflow to 100 messages a second more
# than the number of messages delivered per second.
#
# Specify 0 to disable the feature. Valid delays are 0..10.
#
#in_flow_delay = 1s

# ADDRESS REWRITING
#
# The ADDRESS_REWRITING_README document gives information about
# address masquerading or other forms of address rewriting including
# username->Firstname.Lastname mapping.

# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
#
# The VIRTUAL_README document gives information about the many forms
# of domain hosting that Postfix supports.

# "USER HAS MOVED" BOUNCE MESSAGES
#
# See the discussion in the ADDRESS_REWRITING_README document.

# TRANSPORT MAP
#
# See the discussion in the ADDRESS_REWRITING_README document.

# ALIAS DATABASE
#
# The alias_maps parameter specifies the list of alias databases used
# by the local delivery agent. The default list is system dependent.
#
# On systems with NIS, the default is to search the local alias
# database, then the NIS alias database. See aliases(5) for syntax
# details.
#
# If you change the alias database, run "postalias /etc/aliases" (or
# wherever your system stores the mail alias file), or simply run
# "newaliases" to build the necessary DBM or DB file.
#
# It will take a minute or so before changes become visible.  Use
# "postfix reload" to eliminate the delay.
#
#alias_maps = dbm:/etc/aliases
#alias_maps = hash:/etc/aliases
#alias_maps = hash:/etc/aliases, nis:mail.aliases
#alias_maps = netinfo:/aliases

# The alias_database parameter specifies the alias database(s) that
# are built with "newaliases" or "sendmail -bi".  This is a separate
# configuration parameter, because alias_maps (see above) may specify
# tables that are not necessarily all under control by Postfix.
#
#alias_database = dbm:/etc/aliases
#alias_database = dbm:/etc/mail/aliases
#alias_database = hash:/etc/aliases
#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases

# ADDRESS EXTENSIONS (e.g., user+foo)
#
# The recipient_delimiter parameter specifies the separator between
# user names and address extensions (user+foo). See canonical(5),
# local(8), relocated(5) and virtual(5) for the effects this has on
# aliases, canonical, virtual, relocated and .forward file lookups.
# Basically, the software tries user+foo and .forward+foo before
# trying user and .forward.
#
#recipient_delimiter = +

# DELIVERY TO MAILBOX
#
# The home_mailbox parameter specifies the optional pathname of a
# mailbox file relative to a user's home directory. The default
# mailbox file is /var/spool/mail/user or /var/mail/user.  Specify
# "Maildir/" for qmail-style delivery (the / is required).
#
#home_mailbox = Mailbox
home_mailbox = Maildir/

# The mail_spool_directory parameter specifies the directory where
# UNIX-style mailboxes are kept. The default setting depends on the
# system type.
#
#mail_spool_directory = /var/mail
#mail_spool_directory = /var/spool/mail

# The mailbox_command parameter specifies the optional external
# command to use instead of mailbox delivery. The command is run as
# the recipient with proper HOME, SHELL and LOGNAME environment settings.
# Exception:  delivery for root is done as $default_user.
#
# Other environment variables of interest: USER (recipient username),
# EXTENSION (address extension), DOMAIN (domain part of address),
# and LOCAL (the address localpart).
#
# Unlike other Postfix configuration parameters, the mailbox_command
# parameter is not subjected to $parameter substitutions. This is to
# make it easier to specify shell syntax (see example below).
#
# Avoid shell meta characters because they will force Postfix to run
# an expensive shell process. Procmail alone is expensive enough.
#
# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
#
#mailbox_command = /some/where/procmail
#mailbox_command = /some/where/procmail -a "$EXTENSION"

# The mailbox_transport specifies the optional transport in master.cf
# to use after processing aliases and .forward files. This parameter
# has precedence over the mailbox_command, fallback_transport and
# luser_relay parameters.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf.  The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#
#mailbox_transport = lmtp:unix:/file/name
#mailbox_transport = cyrus

# The fallback_transport specifies the optional transport in master.cf
# to use for recipients that are not found in the UNIX passwd database.
# This parameter has precedence over the luser_relay parameter.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf.  The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#
#fallback_transport = lmtp:unix:/file/name
#fallback_transport = cyrus
#fallback_transport =

# The luser_relay parameter specifies an optional destination address
# for unknown recipients.  By default, mail for unknown@$mydestination,
# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
# as undeliverable.
#
# The following expansions are done on luser_relay: $user (recipient
# username), $shell (recipient shell), $home (recipient home directory),
# $recipient (full recipient address), $extension (recipient address
# extension), $domain (recipient domain), $local (entire recipient
# localpart), $recipient_delimiter. Specify ${name?value} or
# ${name:value} to expand value only when $name does (does not) exist.
#
# luser_relay works only for the default Postfix local delivery agent.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must specify "local_recipient_maps =" (i.e. empty) in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#
#luser_relay = $user@other.host
#luser_relay = $local@other.host
#luser_relay = admin+$local

# JUNK MAIL CONTROLS
#
# The controls listed here are only a very small subset. The file
# SMTPD_ACCESS_README provides an overview.

# The header_checks parameter specifies an optional table with patterns
# that each logical message header is matched against, including
# headers that span multiple physical lines.
#
# By default, these patterns also apply to MIME headers and to the
# headers of attached messages. With older Postfix versions, MIME and
# attached message headers were treated as body text.
#
# For details, see "man header_checks".
#
#header_checks = regexp:/etc/postfix/header_checks

# FAST ETRN SERVICE
#
# Postfix maintains per-destination logfiles with information about
# deferred mail, so that mail can be flushed quickly with the SMTP
# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
# See the ETRN_README document for a detailed description.
#
# The fast_flush_domains parameter controls what destinations are
# eligible for this service. By default, they are all domains that
# this server is willing to relay mail to.
#
#fast_flush_domains = $relay_domains

# SHOW SOFTWARE VERSION OR NOT
#
# The smtpd_banner parameter specifies the text that follows the 220
# code in the SMTP server's greeting banner. Some people like to see
# the mail version advertised. By default, Postfix shows no version.
#
# You MUST specify $myhostname at the start of the text. That is an
# RFC requirement. Postfix itself does not care.
#
#smtpd_banner = $myhostname ESMTP $mail_name
#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)

# PARALLEL DELIVERY TO THE SAME DESTINATION
#
# How many parallel deliveries to the same user or domain? With local
# delivery, it does not make sense to do massively parallel delivery
# to the same user, because mailbox updates must happen sequentially,
# and expensive pipelines in .forward files can cause disasters when
# too many are run at the same time. With SMTP deliveries, 10
# simultaneous connections to the same domain could be sufficient to
# raise eyebrows.
#
# Each message delivery transport has its XXX_destination_concurrency_limit
# parameter.  The default is $default_destination_concurrency_limit for
# most delivery transports. For the local delivery agent the default is 2.

#local_destination_concurrency_limit = 2
#default_destination_concurrency_limit = 20

# DEBUGGING CONTROL
#
# The debug_peer_level parameter specifies the increment in verbose
# logging level when an SMTP client or server host name or address
# matches a pattern in the debug_peer_list parameter.
#
debug_peer_level = 5

# The debug_peer_list parameter specifies an optional list of domain
# or network patterns, /file/name patterns or type:name tables. When
# an SMTP client or server host name or address matches a pattern,
# increase the verbose logging level by the amount specified in the
# debug_peer_level parameter.
#
#debug_peer_list = 127.0.0.1
#debug_peer_list = some.domain

# The debugger_command specifies the external command that is executed
# when a Postfix daemon program is run with the -D option.
#
# Use "command .. & sleep 5" so that the debugger can attach before
# the process marches on. If you use an X-based debugger, be sure to
# set up your XAUTHORITY environment variable before starting Postfix.
#
debugger_command =
         PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
         xxgdb $daemon_directory/$process_name $process_id & sleep 5

# If you don't have X installed on the Postfix machine, try:
# debugger_command =
#       PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
#       echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
#       >$config_directory/$process_name.$process_id.log & sleep 5

# INSTALL-TIME CONFIGURATION INFORMATION
#
# The following parameters are used when installing a new Postfix version.
#
# sendmail_path: The full pathname of the Postfix sendmail command.
# This is the Sendmail-compatible mail posting interface.
#
sendmail_path = /usr/sbin/sendmail

# newaliases_path: The full pathname of the Postfix newaliases command.
# This is the Sendmail-compatible command to build alias databases.
#
newaliases_path = /usr/bin/newaliases

# mailq_path: The full pathname of the Postfix mailq command.  This
# is the Sendmail-compatible mail queue listing command.
#
mailq_path = /usr/bin/mailq

# setgid_group: The group for mail submission and queue management
# commands.  This must be a group name with a numerical group ID that
# is not shared with other accounts, not even with the Postfix account.
#
#setgid_group = postdrop
setgid_group = maildrop

# html_directory: The location of the Postfix HTML documentation.
#
html_directory = /usr/share/doc/packages/postfix/html

# manpage_directory: The location of the Postfix on-line manual pages.
#
manpage_directory = /usr/share/man

# sample_directory: The location of the Postfix sample configuration files.
# This parameter is obsolete as of Postfix 2.1.
#
sample_directory = /usr/share/doc/packages/postfix/samples

# readme_directory: The location of the Postfix README files.
#
readme_directory = /usr/share/doc/packages/postfix/README_FILES
#biff = no
#mail_spool_directory = /var/mail
#canonical_maps = hash:/etc/postfix/canonical
#virtual_maps = hash:/etc/postfix/virtual
#relocated_maps = hash:/etc/postfix/relocated
#transport_maps = hash:/etc/postfix/transport
#sender_canonical_maps = hash:/etc/postfix/sender_canonical
#masquerade_exceptions = root
#masquerade_classes = envelope_sender, header_sender, header_recipient
#myhostname = linux.site
#program_directory = /usr/lib/postfix
#inet_interfaces = 127.0.0.1 ::1
#masquerade_domains =
#mydestination = $myhostname, localhost.$mydomain
#defer_transports =
#disable_dns_lookups = no
#relayhost =
#mailbox_command =
#mailbox_transport =
#smtpd_sender_restrictions = hash:/etc/postfix/access
#smtpd_client_restrictions =
#smtpd_helo_required = no
#smtpd_helo_restrictions =
#strict_rfc821_envelopes = no
#smtpd_recipient_restrictions = permit_mynetworks,reject_unauth_destination
#smtp_sasl_auth_enable = no
#smtpd_sasl_auth_enable = no
#smtpd_use_tls = no
#smtp_use_tls = no
#alias_maps = hash:/etc/aliases
#mailbox_size_limit = 0
#message_size_limit = 10240000

smtpd_sasl_auth_enable = yes
smtpd_recipient_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_unauth_destination
smtpd_sasl_security_options = noanonymous
smtpd_sasl_local_domain = $myhostname
broken_sasl_auth_clients = yes
smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, check_recipient_access mysql:/etc/postfix/mysql-recipient.cf, reject_unauth_destination, permit
smtpd_sender_restrictions = check_sender_access mysql:/etc/postfix/mysql-sender.cf
smtpd_client_restrictions = check_client_access mysql:/etc/postfix/mysql-client.cf

alias_maps = mysql:/etc/postfix/mysql-aliases.cf
relocated_maps = mysql:/etc/postfix/mysql-relocated.cf
transport_maps = mysql:/etc/postfix/mysql-transport.cf
virtual_maps = mysql:/etc/postfix/mysql-virtual.cf
virtual_mailbox_base = /srv/mail
virtual_mailbox_maps = mysql:/etc/postfix/mysql-virtual-maps.cf
virtual_uid_maps = mysql:/etc/postfix/mysql-virtual-uid.cf
virtual_gid_maps = mysql:/etc/postfix/mysql-virtual-gid.cf

maildrop_destination_recipient_limit = 1
/etc/postfix/master.cf

Code: Select all

#
# Postfix master process configuration file.  Each logical line
# describes how a Postfix daemon program should be run.
#
# A logical line starts with non-whitespace, non-comment text.
# Empty lines and whitespace-only lines are ignored, as are comment
# lines whose first non-whitespace character is a `#'.
# A line that starts with whitespace continues a logical line.
#
# The fields that make up each line are described below. A "-" field
# value requests that a default value be used for that field.
#
# Service: any name that is valid for the specified transport type
# (the next field).  With INET transports, a service is specified as
# host:port.  The host part (and colon) may be omitted. Either host
# or port may be given in symbolic form or in numeric form. Examples
# for the SMTP server:  localhost:smtp receives mail via the loopback
# interface only; 10025 receives mail on port 10025.
#
# Transport type: "inet" for Internet sockets, "unix" for UNIX-domain
# sockets, "fifo" for named pipes.
#
# Private: whether or not access is restricted to the mail system.
# Default is private service.  Internet (inet) sockets can't be private.
#
# Unprivileged: whether the service runs with root privileges or as
# the owner of the Postfix system (the owner name is controlled by the
# mail_owner configuration variable in the main.cf file). Only the
# pipe, virtual and local delivery daemons require privileges.
#
# Chroot: whether or not the service runs chrooted to the mail queue
# directory (pathname is controlled by the queue_directory configuration
# variable in the main.cf file). Presently, all Postfix daemons can run
# chrooted, except for the pipe, virtual and local delivery daemons.
# The proxymap server can run chrooted, but doing so defeats most of
# the purpose of having that service in the first place.
# The files in the examples/chroot-setup subdirectory describe how
# to set up a Postfix chroot environment for your type of machine.
#
# Wakeup time: automatically wake up the named service after the
# specified number of seconds. A ? at the end of the wakeup time
# field requests that wake up events be sent only to services that
# are actually being used.  Specify 0 for no wakeup. Presently, only
# the pickup, queue manager and flush daemons need a wakeup timer.
#
# Max procs: the maximum number of processes that may execute this
# service simultaneously. Default is to use a globally configurable
# limit (the default_process_limit configuration parameter in main.cf).
# Specify 0 for no process count limit.
#
# Command + args: the command to be executed. The command name is
# relative to the Postfix program directory (pathname is controlled by
# the daemon_directory configuration variable). Adding one or more
# -v options turns on verbose logging for that service; adding a -D
# option enables symbolic debugging (see the debugger_command variable
# in the main.cf configuration file). See individual command man pages
# for specific command-line options, if any.
#
# General main.cf options can be overridden for specific services.
# To override one or more main.cf options, specify them as arguments
# below, preceding each option by "-o".  There must be no whitespace
# in the option itself (separate multiple values for an option by
# commas).
#
# In order to use the "uucp" message tranport below, set up entries
# in the transport table.
#
# In order to use the "cyrus" message transport below, configure it
# in main.cf as the mailbox_transport.
#
# SPECIFY ONLY PROGRAMS THAT ARE WRITTEN TO RUN AS POSTFIX DAEMONS.
# ALL DAEMONS SPECIFIED HERE MUST SPEAK A POSTFIX-INTERNAL PROTOCOL.
#
# DO NOT SHARE THE POSTFIX QUEUE BETWEEN MULTIPLE POSTFIX INSTANCES.
#
# ==========================================================================
# service type  private unpriv  chroot  wakeup  maxproc command + args
#               (yes)   (yes)   (yes)   (never) (100)
# ==========================================================================
smtp      inet  n       -       n       -       -       smtpd
#smtps    inet  n       -       n       -       -       smtpd
#  -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes
#submission   inet    n       -       n       -       -       smtpd
#  -o smtpd_enforce_tls=yes -o smtpd_sasl_auth_enable=yes -o smtpd_etrn_restrictions=reject
#628      inet  n       -       n       -       -       qmqpd
pickup    fifo  n       -       n       60      1       pickup
cleanup   unix  n       -       n       -       0       cleanup
qmgr      fifo  n       -       n       300     1       qmgr
#qmgr     fifo  n       -       n       300     1       oqmgr
#tlsmgr   fifo  -       -       n       300     1       tlsmgr
rewrite   unix  -       -       n       -       -       trivial-rewrite
bounce    unix  -       -       n       -       0       bounce
defer     unix  -       -       n       -       0       bounce
trace     unix  -       -       n       -       0       bounce
verify    unix  -       -       n       -       1       verify
flush     unix  n       -       n       1000?   0       flush
proxymap  unix  -       -       n       -       -       proxymap
smtp      unix  -       -       n       -       -       smtp
relay     unix  -       -       n       -       -       smtp
#       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq     unix  n       -       n       -       -       showq
error     unix  -       -       n       -       -       error
local     unix  -       n       n       -       -       local
virtual   unix  -       n       n       -       -       virtual
lmtp      unix  -       -       n       -       -       lmtp
anvil     unix  -       -       n       -       1       anvil
#localhost:10025 inet   n       -       n       -       -       smtpd -o content_filter=
#
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# maildrop. See the Postfix MAILDROP_README file for details.
#
maildrop  unix  -       n       n       -       -       pipe
  flags=R user=vmail argv=/usr/local/courier/bin/maildrop -d ${recipient}
cyrus     unix  -       n       n       -       -       pipe
  user=cyrus argv=/usr/lib/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
uucp      unix  -       n       n       -       -       pipe
  flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
ifmail    unix  -       n       n       -       -       pipe
  flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp     unix  -       n       n       -       -       pipe
  flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient
procmail  unix  -       n       n       -       -       pipe
  flags=R user=nobody argv=/usr/bin/procmail -t -m /etc/procmailrc ${sender} ${recipient}
scache    unix  -       -       n       -       1       scache
discard   unix  -       -       n       -       -       discard
tlsmgr    unix  -       -       n       1000?   1       tlsmgr
/etc/postfix/mysql-aliases.cf

Code: Select all

user = mailsystem
password = mysqlpasswort
dbname = mailsystem
table = ms_aliases
select_field = msa_goto
where_field = msa_address
hosts = 127.0.0.1
/etc/postfix/mysql-client.cf

Code: Select all

user = mailsystem
password = mysqlpasswort
dbname = mailsystem
table = ms_access
select_field = msc_access
where_field = msc_source
additional_conditions = AND msc_type='client'
hosts = 127.0.0.1
/etc/postfix/mysql-recipient.cf

Code: Select all

user = mailsystem
password = mysqlpasswort
dbname = mailsystem
table = ms_access
select_field = msc_access
where_field = msc_source
additional_conditions = AND msc_type='recipient'
hosts = 127.0.0.1
/etc/postfix/mysql-relocated.cf

Code: Select all

user = mailsystem
password = mysqlpasswort
dbname = mailsystem
table = ms_relocations
select_field = msr_goto
where_field = msr_address
hosts = 127.0.0.1
/etc/postfix/mysql-sender.cf

Code: Select all

user = mailsystem
password = mysqlpasswort
dbname = mailsystem
table = ms_access
select_field = msc_access
where_field = msc_source
additional_conditions = AND msc_type='sender'
hosts = 127.0.0.1
/etc/postfix/mysql-transport.cf

Code: Select all

user = mailsystem
password = mysqlpasswort
dbname = mailsystem
table = ms_domains
select_field = msd_transport
where_field = msd_domain
hosts = 127.0.0.1
Last edited by web-gear on 2005-05-31 22:49, edited 1 time in total.

web-gear
Posts: 59
Joined: 2003-03-15 00:25

Re: Postfix-Fehler authdaemon: s_connect() failed: Permission...

Post by web-gear » 2005-05-30 14:34

/etc/postfix/mysql-virtual-gid.cf

Code: Select all

user = mailsystem
password = mysqlpasswort
dbname = mailsystem
table = ms_mailboxes
select_field = msb_gid
where_field = msb_username
additional_conditions = AND msb_active_system=1 AND msb_active_user=1
hosts = 127.0.0.1
/etc/postfix/mysql-virtual-maps.cf

Code: Select all

user = mailsystem
password = mysqlpasswort
dbname = mailsystem
table = ms_mailboxes
select_field = msb_maildir
where_field = msb_username
additional_conditions = AND msb_active_system=1 AND msb_active_user=1
hosts = 127.0.0.1
/etc/postfix/mysql-virtual-uid.cf

Code: Select all

user = mailsystem
password = mysqlpasswort
dbname = mailsystem
table = ms_mailboxes
select_field = msb_uid
where_field = msb_username
additional_conditions = AND msb_active_system=1 AND msb_active_user=1
hosts = 127.0.0.1
/etc/postfix/mysql-virtual.cf

Code: Select all

user = mailsystem
password = mysqlpasswort
dbname = mailsystem
table = ms_virtual
select_field = msv_goto
where_field = msv_address
hosts = 127.0.0.1
/etc/maildroprc

Code: Select all

if ( $SIZE < 26144 )
{
    exception {
       xfilter "/usr/bin/spamassassin"
    }
}

if (/^X-Spam-Flag: *YES/)
{
    exception {
        to "$HOME/$DEFAULT/.Spam/"
    }
}
else
{
    exception {
        to "$HOME/$DEFAULT"
    }
}
Mein DB-Schema:

Code: Select all

CREATE TABLE `ms_access` (
  `msc_id` int(10) unsigned NOT NULL auto_increment,
  `msc_source` varchar(128) NOT NULL default '',
  `msc_access` varchar(128) NOT NULL default '',
  `msc_type` enum('recipient','sender','client') NOT NULL default 'recipient',
  PRIMARY KEY  (`msc_id`)
) TYPE=MyISAM AUTO_INCREMENT=5 ;

-- 
-- Daten für Tabelle `ms_access`
-- 

INSERT INTO `ms_access` (`msc_id`, `msc_source`, `msc_access`, `msc_type`) VALUES (1, '*', 'OK', 'recipient');

-- --------------------------------------------------------

-- 
-- Tabellenstruktur für Tabelle `ms_aliases`
-- 

CREATE TABLE `ms_aliases` (
  `msa_address` varchar(255) NOT NULL default '',
  `msa_goto` text NOT NULL,
  `msa_user_id` int(9) unsigned NOT NULL default '0',
  `msa_domain_id` smallint(5) unsigned NOT NULL default '0',
  `msa_date_rc` int(10) unsigned NOT NULL default '0',
  `msa_date_lc` int(10) unsigned NOT NULL default '0',
  `msa_active_system` tinyint(1) unsigned NOT NULL default '1',
  `msa_active_user` tinyint(1) unsigned NOT NULL default '1',
  PRIMARY KEY  (`msa_address`)
) TYPE=MyISAM;

-- 
-- Daten für Tabelle `ms_aliases`
-- 


-- --------------------------------------------------------

-- 
-- Tabellenstruktur für Tabelle `ms_domains`
-- 

CREATE TABLE `ms_domains` (
  `msd_id` smallint(5) unsigned NOT NULL auto_increment,
  `msd_user_id` int(9) unsigned NOT NULL default '0',
  `msd_domain` varchar(255) NOT NULL default '',
  `msd_domain_global_id` smallint(5) unsigned NOT NULL default '0',
  `msd_description` varchar(255) NOT NULL default '',
  `msd_transport` varchar(255) default NULL,
  `msd_date_rc` int(10) unsigned NOT NULL default '0',
  `msd_date_lc` int(10) unsigned NOT NULL default '0',
  `msd_active_system` tinyint(1) unsigned NOT NULL default '1',
  `msd_active_user` tinyint(1) unsigned NOT NULL default '1',
  PRIMARY KEY  (`msd_id`),
  UNIQUE KEY `msd_domain` (`msd_domain`)
) TYPE=MyISAM AUTO_INCREMENT=1001 ;

-- 
-- Daten für Tabelle `ms_domains`
-- 

INSERT INTO `ms_domains` (`msd_id`, `msd_user_id`, `msd_domain`, `msd_domain_global_id`, `msd_description`, `msd_transport`, `msd_date_rc`, `msd_date_lc`, `msd_active_system`, `msd_active_user`) VALUES (4, 0, 'domain.net', 0, 'Web-Gear', 'maildrop:', 0, 0, 1, 1);

-- --------------------------------------------------------

-- 
-- Tabellenstruktur für Tabelle `ms_mailboxes`
-- 

CREATE TABLE `ms_mailboxes` (
  `msb_id` smallint(5) unsigned NOT NULL auto_increment,
  `msb_username` varchar(255) NOT NULL default '',
  `msb_password` varchar(128) NOT NULL default '',
  `msb_password_clear` varchar(128) NOT NULL default '',
  `msb_user_id` int(9) unsigned NOT NULL default '0',
  `msb_domain_id` smallint(5) unsigned NOT NULL default '0',
  `msb_name` varchar(255) NOT NULL default '',
  `msb_uid` smallint(4) unsigned NOT NULL default '1004',
  `msb_gid` smallint(4) unsigned NOT NULL default '1004',
  `msb_homedir` varchar(255) NOT NULL default '',
  `msb_maildir` varchar(255) NOT NULL default '',
  `msb_quota` bigint(10) unsigned NOT NULL default '0',
  `msb_date_rc` int(10) unsigned NOT NULL default '0',
  `msb_date_lc` int(10) unsigned NOT NULL default '0',
  `msb_o_pop3` tinyint(1) unsigned NOT NULL default '1',
  `msb_o_imap` tinyint(1) unsigned NOT NULL default '1',
  `msb_active_system` tinyint(1) unsigned NOT NULL default '1',
  `msb_active_user` tinyint(1) unsigned NOT NULL default '1',
  `msb_local` char(1) NOT NULL default 'Y',
  `msb_policy_id` smallint(5) unsigned NOT NULL default '1',
  `msb_postfix` enum('Y','N') NOT NULL default 'Y',
  PRIMARY KEY  (`msb_id`)
) TYPE=MyISAM AUTO_INCREMENT=1006 ;

-- 
-- Daten für Tabelle `ms_mailboxes`
-- 

INSERT INTO `ms_mailboxes` (`msb_id`, `msb_username`, `msb_password`, `msb_password_clear`, `msb_user_id`, `msb_domain_id`, `msb_name`, `msb_uid`, `msb_gid`, `msb_homedir`, `msb_maildir`, `msb_quota`, `msb_date_rc`, `msb_date_lc`, `msb_o_pop3`, `msb_o_imap`, `msb_active_system`, `msb_active_user`, `msb_local`, `msb_policy_id`, `msb_postfix`) VALUES (1005, 'test@domain.net', '$1$339492d5$Tr2cwmLcMOnKvWcDRwdqa1', 'test', 0, 4, '', 1004, 1004, '/srv/mail', '00001005/', 52428800, 1117139957, 1117139957, 1, 1, 1, 1, 'Y', 1, 'Y');

-- --------------------------------------------------------

-- 
-- Tabellenstruktur für Tabelle `ms_relocations`
-- 

CREATE TABLE `ms_relocations` (
  `msr_address` varchar(128) NOT NULL default '',
  `msr_goto` varchar(128) NOT NULL default '',
  PRIMARY KEY  (`msr_address`)
) TYPE=MyISAM;

-- 
-- Daten für Tabelle `ms_relocations`
-- 


-- --------------------------------------------------------

-- 
-- Tabellenstruktur für Tabelle `ms_virtual`
-- 

CREATE TABLE `ms_virtual` (
  `msv_address` varchar(128) NOT NULL default '',
  `msv_goto` varchar(128) NOT NULL default '',
  PRIMARY KEY  (`msv_address`)
) TYPE=MyISAM;

-- 
-- Daten für Tabelle `ms_virtual`
-- 


Vielleicht kann mir ja jemand weiterhelfen...

Ich bedanke mich schon mal herzlich für alle Antworten!!

m.c.s.
Posts: 55
Joined: 2004-06-13 11:59
Location: Hamburg

Re: Postfix-Fehler authdaemon: s_connect() failed: Permission...

Post by m.c.s. » 2005-05-30 14:56

"alias_maps = mysql:/etc/postfix/mysql-aliases.cf "
Sollte normal "hash:/etc/alias" bleiben; was du vermutlich meinst ist virtual_alias_maps für die Weiterleitung virtueller Domains

"smtpd_recipient_restrictions" existiert mehrfach...


Was steht denn in der smtpd.conf vom SASL-Modul drin? (Ich weiß den Pfad für SuSE gerade nicht...)

web-gear
Posts: 59
Joined: 2003-03-15 00:25

Re: Postfix-Fehler authdaemon: s_connect() failed: Permission...

Post by web-gear » 2005-05-30 17:21

Danke für die Antwort!
M.C.S. wrote:Was steht denn in der smtpd.conf vom SASL-Modul drin? (Ich weiß den Pfad für SuSE gerade nicht...)
/usr/lib64/sasl2/smtpd.conf

Code: Select all

pwcheck_method: saslauthd
mech_list: plain login
Ich habe die von Dir genannten Parameter korrigiert, und das ganze noch in Anlehnung an einen vor einem oder zwei Jahren aufgesetzten Test-Mailserver (der einwandfrei funktioniert, aber leider sind da ein paar Funktionen nicht drin die ich heute will) etwas "vereinfacht".

Hier meine neue main.cf:

Code: Select all

#
# -----------------------------------------------------------------------
# NOTE: Many parameters have already been added to the end of this file
#       by SuSEconfig.postfix. So take care that you don't uncomment
#       and set a parameter without checking whether it has been added
#       to the end of this file.
# -----------------------------------------------------------------------
#
# Global Postfix configuration file. This file lists only a subset
# of all 300+ parameters. See the postconf(5) manual page for a
# complete list.
#
# The general format of each line is: parameter = value. Lines
# that begin with whitespace continue the previous line. A value can
# contain references to other $names or ${name}s.
#
# NOTE - CHANGE NO MORE THAN 2-3 PARAMETERS AT A TIME, AND TEST IF
# POSTFIX STILL WORKS AFTER EVERY CHANGE.

# SOFT BOUNCE
#
# The soft_bounce parameter provides a limited safety net for
# testing.  When soft_bounce is enabled, mail will remain queued that
# would otherwise bounce. This parameter disables locally-generated
# bounces, and prevents the SMTP server from rejecting mail permanently
# (by changing 5xx replies into 4xx replies). However, soft_bounce
# is no cure for address rewriting mistakes or mail routing mistakes.
#
#soft_bounce = no

# LOCAL PATHNAME INFORMATION
#
# The queue_directory specifies the location of the Postfix queue.
# This is also the root directory of Postfix daemons that run chrooted.
# See the files in examples/chroot-setup for setting up Postfix chroot
# environments on different UNIX systems.
#
queue_directory = /var/spool/postfix

# The command_directory parameter specifies the location of all
# postXXX commands.
#
command_directory = /usr/sbin

# The daemon_directory parameter specifies the location of all Postfix
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
#
daemon_directory = /usr/lib/postfix

# QUEUE AND PROCESS OWNERSHIP
#
# The mail_owner parameter specifies the owner of the Postfix queue
# and of most Postfix daemon processes.  Specify the name of a user
# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM.  In
# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
# USER.
#
mail_owner = postfix

# The default_privs parameter specifies the default rights used by
# the local delivery agent for delivery to external file or command.
# These rights are used in the absence of a recipient user context.
# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
#
#default_privs = nobody

# INTERNET HOST AND DOMAIN NAMES
#
# The myhostname parameter specifies the internet hostname of this
# mail system. The default is to use the fully-qualified domain name
# from gethostname(). $myhostname is used as a default value for many
# other configuration parameters.
#
#myhostname = host.domain.tld
#myhostname = virtual.domain.tld
myhostname = mail.mailserverdomain.net

# The mydomain parameter specifies the local internet domain name.
# The default is to use $myhostname minus the first component.
# $mydomain is used as a default value for many other configuration
# parameters.
#
mydomain = mailserverdomain.net

# SENDING MAIL
#
# The myorigin parameter specifies the domain that locally-posted
# mail appears to come from. The default is to append $myhostname,
# which is fine for small sites.  If you run a domain with multiple
# machines, you should (1) change this to $mydomain and (2) set up
# a domain-wide alias database that aliases each user to
# user@that.users.mailhost.
#
# For the sake of consistency between sender and recipient addresses,
# myorigin also specifies the default domain name that is appended
# to recipient addresses that have no @domain part.
#
#myorigin = $myhostname
myorigin = $mydomain

# RECEIVING MAIL

# The inet_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on.  By default,
# the software claims all active interfaces on the machine. The
# parameter also controls delivery of mail to user@[ip.address].
#
# See also the proxy_interfaces parameter, for network addresses that
# are forwarded to us via a proxy or network address translator.
#
# Note: you need to stop/start Postfix when this parameter changes.
#
inet_interfaces = all
#inet_interfaces = $myhostname
#inet_interfaces = $myhostname, localhost

# The proxy_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on by way of a
# proxy or network address translation unit. This setting extends
# the address list specified with the inet_interfaces parameter.
#
# You must specify your proxy/NAT addresses when your system is a
# backup MX host for other domains, otherwise mail delivery loops
# will happen when the primary MX host is down.
#
#proxy_interfaces =
#proxy_interfaces = 1.2.3.4

# The mydestination parameter specifies the list of domains that this
# machine considers itself the final destination for.
#
# These domains are routed to the delivery agent specified with the
# local_transport parameter setting. By default, that is the UNIX
# compatible delivery agent that lookups all recipients in /etc/passwd
# and /etc/aliases or their equivalent.
#
# The default is $myhostname + localhost.$mydomain.  On a mail domain
# gateway, you should also include $mydomain.
#
# Do not specify the names of virtual domains - those domains are
# specified elsewhere (see VIRTUAL_README).
#
# Do not specify the names of domains that this machine is backup MX
# host for. Specify those names via the relay_domains settings for
# the SMTP server, or use permit_mx_backup if you are lazy (see
# STANDARD_CONFIGURATION_README).
#
# The local machine is always the final destination for mail addressed
# to user@[the.net.work.address] of an interface that the mail system
# receives mail on (see the inet_interfaces parameter).
#
# Specify a list of host or domain names, /file/name or type:table
# patterns, separated by commas and/or whitespace. A /file/name
# pattern is replaced by its contents; a type:table is matched when
# a name matches a lookup key (the right-hand side is ignored).
# Continue long lines by starting the next line with whitespace.
#
# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
#
#mydestination = $myhostname, localhost.$mydomain, localhost
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
#       mail.$mydomain, www.$mydomain, ftp.$mydomain
mydestination = mailserverdomain.net, $transport_maps

# REJECTING MAIL FOR UNKNOWN LOCAL USERS
#
# The local_recipient_maps parameter specifies optional lookup tables
# with all names or addresses of users that are local with respect
# to $mydestination, $inet_interfaces or $proxy_interfaces.
#
# If this parameter is defined, then the SMTP server will reject
# mail for unknown local users. This parameter is defined by default.
#
# To turn off local recipient checking in the SMTP server, specify
# local_recipient_maps = (i.e. empty).
#
# The default setting assumes that you use the default Postfix local
# delivery agent for local delivery. You need to update the
# local_recipient_maps setting if:
#
# - You define $mydestination domain recipients in files other than
#   /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
#   For example, you define $mydestination domain recipients in
#   the $virtual_mailbox_maps files.
#
# - You redefine the local delivery agent in master.cf.
#
# - You redefine the "local_transport" setting in main.cf.
#
# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
#   feature of the Postfix local delivery agent (see local(8)).
#
# Details are described in the LOCAL_RECIPIENT_README file.
#
# Beware: if the Postfix SMTP server runs chrooted, you probably have
# to access the passwd file via the proxymap service, in order to
# overcome chroot restrictions. The alternative, having a copy of
# the system passwd file in the chroot jail is just not practical.
#
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify a bare username, an @domain.tld
# wild-card, or specify a user@domain.tld address.
#
#local_recipient_maps = unix:passwd.byname $alias_maps
#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
#local_recipient_maps =
local_recipient_maps = $alias_maps $virtual_mailbox_maps unix:passwd.byname

# The unknown_local_recipient_reject_code specifies the SMTP server
# response code when a recipient domain matches $mydestination or
# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
# and the recipient address or address local-part is not found.
#
# The default setting is 550 (reject mail) but it is safer to start
# with 450 (try again later) until you are certain that your
# local_recipient_maps settings are OK.
#
unknown_local_recipient_reject_code = 550

# TRUST AND RELAY CONTROL

# The mynetworks parameter specifies the list of "trusted" SMTP
# clients that have more privileges than "strangers".
#
# In particular, "trusted" SMTP clients are allowed to relay mail
# through Postfix.  See the smtpd_recipient_restrictions parameter
# in postconf(5).
#
# You can specify the list of "trusted" network addresses by hand
# or you can let Postfix do it for you (which is the default).
#
# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
# clients in the same IP subnetworks as the local machine.
# On Linux, this does works correctly only with interfaces specified
# with the "ifconfig" command.
#
# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
# clients in the same IP class A/B/C networks as the local machine.
# Don't do this with a dialup site - it would cause Postfix to "trust"
# your entire provider's network.  Instead, specify an explicit
# mynetworks list by hand, as described below.
#
# Specify "mynetworks_style = host" when Postfix should "trust"
# only the local machine.
#
#mynetworks_style = class
#mynetworks_style = subnet
#mynetworks_style = host

# Alternatively, you can specify the mynetworks list by hand, in
# which case Postfix ignores the mynetworks_style setting.
#
# Specify an explicit list of network/netmask patterns, where the
# mask specifies the number of bits in the network part of a host
# address.
#
# You can also specify the absolute pathname of a pattern file instead
# of listing the patterns here. Specify type:table for table-based lookups
# (the value on the table right-hand side is not used).
#
#mynetworks = 168.100.189.0/28, 127.0.0.0/8
#mynetworks = $config_directory/mynetworks
#mynetworks = hash:/etc/postfix/network_table

# The relay_domains parameter restricts what destinations this system will
# relay mail to.  See the smtpd_recipient_restrictions description in
# postconf(5) for detailed information.
#
# By default, Postfix relays mail
# - from "trusted" clients (IP address matches $mynetworks) to any destination,
# - from "untrusted" clients to destinations that match $relay_domains or
#   subdomains thereof, except addresses with sender-specified routing.
# The default relay_domains value is $mydestination.
#
# In addition to the above, the Postfix SMTP server by default accepts mail
# that Postfix is final destination for:
# - destinations that match $inet_interfaces or $proxy_interfaces,
# - destinations that match $mydestination
# - destinations that match $virtual_alias_domains,
# - destinations that match $virtual_mailbox_domains.
# These destinations do not need to be listed in $relay_domains.
#
# Specify a list of hosts or domains, /file/name patterns or type:name
# lookup tables, separated by commas and/or whitespace.  Continue
# long lines by starting the next line with whitespace. A file name
# is replaced by its contents; a type:name table is matched when a
# (parent) domain appears as lookup key.
#
# NOTE: Postfix will not automatically forward mail for domains that
# list this system as their primary or backup MX host. See the
# permit_mx_backup restriction description in postconf(5).
#
#relay_domains = $mydestination

# INTERNET OR INTRANET

# The relayhost parameter specifies the default host to send mail to
# when no entry is matched in the optional transport(5) table. When
# no relayhost is given, mail is routed directly to the destination.
#
# On an intranet, specify the organizational domain name. If your
# internal DNS uses no MX records, specify the name of the intranet
# gateway host instead.
#
# In the case of SMTP, specify a domain, host, host:port, [host]:port,
# [address] or [address]:port; the form [host] turns off MX lookups.
#
# If you're connected via UUCP, see also the default_transport parameter.
#
#relayhost = $mydomain
#relayhost = [gateway.my.domain]
#relayhost = [mailserver.isp.tld]
#relayhost = uucphost
#relayhost = [an.ip.add.ress]

# REJECTING UNKNOWN RELAY USERS
#
# The relay_recipient_maps parameter specifies optional lookup tables
# with all addresses in the domains that match $relay_domains.
#
# If this parameter is defined, then the SMTP server will reject
# mail for unknown relay users. This feature is off by default.
#
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify an @domain.tld wild-card, or specify
# a user@domain.tld address.
#
#relay_recipient_maps = hash:/etc/postfix/relay_recipients

# INPUT RATE CONTROL
#
# The in_flow_delay configuration parameter implements mail input
# flow control. This feature is turned on by default, although it
# still needs further development (it's disabled on SCO UNIX due
# to an SCO bug).
#
# A Postfix process will pause for $in_flow_delay seconds before
# accepting a new message, when the message arrival rate exceeds the
# message delivery rate. With the default 100 SMTP server process
# limit, this limits the mail inflow to 100 messages a second more
# than the number of messages delivered per second.
#
# Specify 0 to disable the feature. Valid delays are 0..10.
#
#in_flow_delay = 1s

# ADDRESS REWRITING
#
# The ADDRESS_REWRITING_README document gives information about
# address masquerading or other forms of address rewriting including
# username->Firstname.Lastname mapping.

# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
#
# The VIRTUAL_README document gives information about the many forms
# of domain hosting that Postfix supports.

# "USER HAS MOVED" BOUNCE MESSAGES
#
# See the discussion in the ADDRESS_REWRITING_README document.

# TRANSPORT MAP
#
# See the discussion in the ADDRESS_REWRITING_README document.

# ALIAS DATABASE
#
# The alias_maps parameter specifies the list of alias databases used
# by the local delivery agent. The default list is system dependent.
#
# On systems with NIS, the default is to search the local alias
# database, then the NIS alias database. See aliases(5) for syntax
# details.
#
# If you change the alias database, run "postalias /etc/aliases" (or
# wherever your system stores the mail alias file), or simply run
# "newaliases" to build the necessary DBM or DB file.
#
# It will take a minute or so before changes become visible.  Use
# "postfix reload" to eliminate the delay.
#
#alias_maps = dbm:/etc/aliases
#alias_maps = hash:/etc/aliases
#alias_maps = hash:/etc/aliases, nis:mail.aliases
#alias_maps = netinfo:/aliases

# The alias_database parameter specifies the alias database(s) that
# are built with "newaliases" or "sendmail -bi".  This is a separate
# configuration parameter, because alias_maps (see above) may specify
# tables that are not necessarily all under control by Postfix.
#
#alias_database = dbm:/etc/aliases
#alias_database = dbm:/etc/mail/aliases
#alias_database = hash:/etc/aliases
#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases

# ADDRESS EXTENSIONS (e.g., user+foo)
#
# The recipient_delimiter parameter specifies the separator between
# user names and address extensions (user+foo). See canonical(5),
# local(8), relocated(5) and virtual(5) for the effects this has on
# aliases, canonical, virtual, relocated and .forward file lookups.
# Basically, the software tries user+foo and .forward+foo before
# trying user and .forward.
#
#recipient_delimiter = +

# DELIVERY TO MAILBOX
#
# The home_mailbox parameter specifies the optional pathname of a
# mailbox file relative to a user's home directory. The default
# mailbox file is /var/spool/mail/user or /var/mail/user.  Specify
# "Maildir/" for qmail-style delivery (the / is required).
#
#home_mailbox = Mailbox
home_mailbox = Maildir/

# The mail_spool_directory parameter specifies the directory where
# UNIX-style mailboxes are kept. The default setting depends on the
# system type.
#
#mail_spool_directory = /var/mail
#mail_spool_directory = /var/spool/mail

# The mailbox_command parameter specifies the optional external
# command to use instead of mailbox delivery. The command is run as
# the recipient with proper HOME, SHELL and LOGNAME environment settings.
# Exception:  delivery for root is done as $default_user.
#
# Other environment variables of interest: USER (recipient username),
# EXTENSION (address extension), DOMAIN (domain part of address),
# and LOCAL (the address localpart).
#
# Unlike other Postfix configuration parameters, the mailbox_command
# parameter is not subjected to $parameter substitutions. This is to
# make it easier to specify shell syntax (see example below).
#
# Avoid shell meta characters because they will force Postfix to run
# an expensive shell process. Procmail alone is expensive enough.
#
# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
#
#mailbox_command = /some/where/procmail
#mailbox_command = /some/where/procmail -a "$EXTENSION"

# The mailbox_transport specifies the optional transport in master.cf
# to use after processing aliases and .forward files. This parameter
# has precedence over the mailbox_command, fallback_transport and
# luser_relay parameters.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf.  The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#
#mailbox_transport = lmtp:unix:/file/name
#mailbox_transport = cyrus

# The fallback_transport specifies the optional transport in master.cf
# to use for recipients that are not found in the UNIX passwd database.
# This parameter has precedence over the luser_relay parameter.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf.  The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#
#fallback_transport = lmtp:unix:/file/name
#fallback_transport = cyrus
#fallback_transport =

# The luser_relay parameter specifies an optional destination address
# for unknown recipients.  By default, mail for unknown@$mydestination,
# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
# as undeliverable.
#
# The following expansions are done on luser_relay: $user (recipient
# username), $shell (recipient shell), $home (recipient home directory),
# $recipient (full recipient address), $extension (recipient address
# extension), $domain (recipient domain), $local (entire recipient
# localpart), $recipient_delimiter. Specify ${name?value} or
# ${name:value} to expand value only when $name does (does not) exist.
#
# luser_relay works only for the default Postfix local delivery agent.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must specify "local_recipient_maps =" (i.e. empty) in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#
#luser_relay = $user@other.host
#luser_relay = $local@other.host
#luser_relay = admin+$local

# JUNK MAIL CONTROLS
#
# The controls listed here are only a very small subset. The file
# SMTPD_ACCESS_README provides an overview.

# The header_checks parameter specifies an optional table with patterns
# that each logical message header is matched against, including
# headers that span multiple physical lines.
#
# By default, these patterns also apply to MIME headers and to the
# headers of attached messages. With older Postfix versions, MIME and
# attached message headers were treated as body text.
#
# For details, see "man header_checks".
#
#header_checks = regexp:/etc/postfix/header_checks

# FAST ETRN SERVICE
#
# Postfix maintains per-destination logfiles with information about
# deferred mail, so that mail can be flushed quickly with the SMTP
# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
# See the ETRN_README document for a detailed description.
#
# The fast_flush_domains parameter controls what destinations are
# eligible for this service. By default, they are all domains that
# this server is willing to relay mail to.
#
#fast_flush_domains = $relay_domains

# SHOW SOFTWARE VERSION OR NOT
#
# The smtpd_banner parameter specifies the text that follows the 220
# code in the SMTP server's greeting banner. Some people like to see
# the mail version advertised. By default, Postfix shows no version.
#
# You MUST specify $myhostname at the start of the text. That is an
# RFC requirement. Postfix itself does not care.
#
#smtpd_banner = $myhostname ESMTP $mail_name
#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)

# PARALLEL DELIVERY TO THE SAME DESTINATION
#
# How many parallel deliveries to the same user or domain? With local
# delivery, it does not make sense to do massively parallel delivery
# to the same user, because mailbox updates must happen sequentially,
# and expensive pipelines in .forward files can cause disasters when
# too many are run at the same time. With SMTP deliveries, 10
# simultaneous connections to the same domain could be sufficient to
# raise eyebrows.
#
# Each message delivery transport has its XXX_destination_concurrency_limit
# parameter.  The default is $default_destination_concurrency_limit for
# most delivery transports. For the local delivery agent the default is 2.

#local_destination_concurrency_limit = 2
#default_destination_concurrency_limit = 20

# DEBUGGING CONTROL
#
# The debug_peer_level parameter specifies the increment in verbose
# logging level when an SMTP client or server host name or address
# matches a pattern in the debug_peer_list parameter.
#
debug_peer_level = 5

# The debug_peer_list parameter specifies an optional list of domain
# or network patterns, /file/name patterns or type:name tables. When
# an SMTP client or server host name or address matches a pattern,
# increase the verbose logging level by the amount specified in the
# debug_peer_level parameter.
#
#debug_peer_list = 127.0.0.1
#debug_peer_list = some.domain

# The debugger_command specifies the external command that is executed
# when a Postfix daemon program is run with the -D option.
#
# Use "command .. & sleep 5" so that the debugger can attach before
# the process marches on. If you use an X-based debugger, be sure to
# set up your XAUTHORITY environment variable before starting Postfix.
#
debugger_command =
         PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
         xxgdb $daemon_directory/$process_name $process_id & sleep 5

# If you don't have X installed on the Postfix machine, try:
# debugger_command =
#       PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
#       echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
#       >$config_directory/$process_name.$process_id.log & sleep 5

# INSTALL-TIME CONFIGURATION INFORMATION
#
# The following parameters are used when installing a new Postfix version.
#
# sendmail_path: The full pathname of the Postfix sendmail command.
# This is the Sendmail-compatible mail posting interface.
#
sendmail_path = /usr/sbin/sendmail

# newaliases_path: The full pathname of the Postfix newaliases command.
# This is the Sendmail-compatible command to build alias databases.
#
newaliases_path = /usr/bin/newaliases

# mailq_path: The full pathname of the Postfix mailq command.  This
# is the Sendmail-compatible mail queue listing command.
#
mailq_path = /usr/bin/mailq

# setgid_group: The group for mail submission and queue management
# commands.  This must be a group name with a numerical group ID that
# is not shared with other accounts, not even with the Postfix account.
#
#setgid_group = postdrop
setgid_group = maildrop

# html_directory: The location of the Postfix HTML documentation.
#
html_directory = /usr/share/doc/packages/postfix/html

# manpage_directory: The location of the Postfix on-line manual pages.
#
manpage_directory = /usr/share/man

# sample_directory: The location of the Postfix sample configuration files.
# This parameter is obsolete as of Postfix 2.1.
#
sample_directory = /usr/share/doc/packages/postfix/samples

# readme_directory: The location of the Postfix README files.
#
readme_directory = /usr/share/doc/packages/postfix/README_FILES
#biff = no
#mail_spool_directory = /var/mail
#canonical_maps = hash:/etc/postfix/canonical
#virtual_maps = hash:/etc/postfix/virtual
#relocated_maps = hash:/etc/postfix/relocated
#transport_maps = hash:/etc/postfix/transport
#sender_canonical_maps = hash:/etc/postfix/sender_canonical
#masquerade_exceptions = root
#masquerade_classes = envelope_sender, header_sender, header_recipient
#myhostname = linux.site
#program_directory = /usr/lib/postfix
#inet_interfaces = 127.0.0.1 ::1
#masquerade_domains =
#mydestination = $myhostname, localhost.$mydomain
#defer_transports =
#disable_dns_lookups = no
#relayhost =
#mailbox_command =
#mailbox_transport =
#smtpd_sender_restrictions = hash:/etc/postfix/access
#smtpd_client_restrictions =
#smtpd_helo_required = no
#smtpd_helo_restrictions =
#strict_rfc821_envelopes = no
#smtpd_recipient_restrictions = permit_mynetworks,reject_unauth_destination
#smtp_sasl_auth_enable = no
#smtpd_sasl_auth_enable = no
#smtpd_use_tls = no
#smtp_use_tls = no
#alias_maps = hash:/etc/aliases
#mailbox_size_limit = 0
#message_size_limit = 10240000


smtpd_restriction_classes =
  test_recipient_exists

test_recipient_exists =
  reject_unverified_sender,
  permit

#smtpd_etrn_restrictions =
#  permit_mynetworks,
#  check_client_access $relay_domains,
#  reject

smtpd_recipient_restrictions =
  reject_non_fqdn_sender,
  reject_non_fqdn_recipient,
  reject_unknown_sender_domain,
  reject_unknown_recipient_domain,
  permit_mynetworks,
  reject_unauth_pipelining,
  permit_sasl_authenticated,
  reject_unauth_destination,
  reject_non_fqdn_hostname,
  reject_invalid_hostname,
  permit

smtpd_sasl_auth_enable = yes
#smtpd_recipient_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_unauth_destination
smtpd_sasl_security_options = noanonymous
smtpd_sasl_local_domain = $myhostname
broken_sasl_auth_clients = yes
#smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, check_recipient_access mysql:/etc/postfix/mysql-recipient.cf, reject_unauth_destination, permit
#smtpd_sender_restrictions = check_sender_access mysql:/etc/postfix/mysql-sender.cf
#smtpd_client_restrictions = check_client_access mysql:/etc/postfix/mysql-client.cf

#alias_maps = mysql:/etc/postfix/mysql-aliases.cf
#relocated_maps = mysql:/etc/postfix/mysql-relocated.cf
transport_maps = mysql:/etc/postfix/mysql-transport.cf
virtual_alias_maps = mysql:/etc/postfix/mysql-aliases.cf
#virtual_maps = mysql:/etc/postfix/mysql-virtual.cf
virtual_mailbox_base = /srv/mail
virtual_mailbox_maps = mysql:/etc/postfix/mysql-virtual-maps.cf
#virtual_uid_maps = mysql:/etc/postfix/mysql-virtual-uid.cf
#virtual_gid_maps = mysql:/etc/postfix/mysql-virtual-gid.cf
virtual_uid_maps = static:1004
virtual_gid_maps = static:1004

maildrop_destination_recipient_limit = 1
Last edited by web-gear on 2005-05-31 22:50, edited 1 time in total.

captaincrunch
Userprojekt
Userprojekt
Posts: 7225
Joined: 2002-10-09 14:30
Location: Dorsten

Re: Postfix-Fehler authdaemon: s_connect() failed: Permission...

Post by captaincrunch » 2005-05-31 08:32

Selbst wenn ich dir vielleicht nicht direkt helfen kann: Konfigurationsdateien, die kurz und bündig sind, und nicht jede noch so kleine "standardmäßige) Kommentarzeile enthalten werden eher gelesen als ein solcher Wust...
DebianHowTo
echo "[q]sa[ln0=aln256%Pln256/snlbx]sb729901041524823122snlbxq"|dc

m.c.s.
Posts: 55
Joined: 2004-06-13 11:59
Location: Hamburg

Re: Postfix-Fehler authdaemon: s_connect() failed: Permission...

Post by m.c.s. » 2005-05-31 09:01

Und genau aus diesem Grund ist ein einfaches "postconf -n" wesentlich hilfreicher als die komplette main.cf, weil die Kommentare bei der Problemfindung arg störend sind :wink:

web-gear
Posts: 59
Joined: 2003-03-15 00:25

Re: Postfix-Fehler authdaemon: s_connect() failed: Permission...

Post by web-gear » 2005-05-31 19:45

CaptainCrunch wrote:Selbst wenn ich dir vielleicht nicht direkt helfen kann: Konfigurationsdateien, die kurz und bündig sind, und nicht jede noch so kleine "standardmäßige) Kommentarzeile enthalten werden eher gelesen als ein solcher Wust...
Um ehrlich zu sein, hatte ich selbst schon überlegt ob ich die ganzen Kommentare da nicht rauslösche. Auf jeden Fall wird das nicht wieder vorkommen!

@M.C.S.:
Vielen Dank für den mir zugesandten Tipp, das wars! Da ich annehme, dass Du mir das per PM geschickt hast weil der Link nicht publik werden soll (warum auch immer??), erlaube ich mir, hier die Lösung mal zu posten, falls jemand anders das Problem noch haben sollte:
Javier Omella wrote:Yes, it's a maildrop issue, read this, you have 3 options to solve it:

####################################
When using the standalone maildrop build with courier-authlib, one of
the following configurations must be used:

* Your mail server must invoke maildrop as the root user (the -d flag
reads the mail account's uid and gid, then drops root) .
* Manually change the permissions on the maildrop binary to be setuid root.
* Manually change the permissions on the courier-authlib's socket
directory (/usr/local/var/spool/authdaemon by default) to be globally
readable or executable.

The default permissions on courier-authlib's socket directory blocks
world-access to the filesystem socket connected to courier-authlib's
authentication daemon process. In order for maildrop to connect to the
authentication library, maildrop must either have root privileges
(which will be temporary, as soon as maildrop determines the account's
userid and groupid, it will drop root, before reading the maildroprc
file), or courier-authlib's socket directory must have world read and
execute permission.

Note that if the permissions on the socket directory are changed,
anyone on the system can connect and obtain any account's password!

It is the system administrator's responsibility to choose the
appropriate security policy when using the Courier Authentication
Library.
##############################
Leider hat bei mir die zweite Variante nicht funktioniert, und bei der ersten weiß ich nicht wie ich das maildrop beibringen soll. Habe in der master.cf schon etwas rumprobiert, aber da meckert es immer (fatal error wegen root Rechten - ist ja auch richtig so!). Mit der dritten Lösung bin ich natürlich alles andere als glücklich. Weiß jemand wie ich maildrop so konfigurieren kann, dass es arbeitet wie unter punkt 1 beschrieben?

Auf jeden Fall klappt es jetzt erstmal ndich kann zumindest weitermachen! Vielen, vielen Dank an Euch alle, Ihr habt mir sehr geholfen!!

MfG
Web-gear

m.c.s.
Posts: 55
Joined: 2004-06-13 11:59
Location: Hamburg

Re: Postfix-Fehler authdaemon: s_connect() failed: Permission...

Post by m.c.s. » 2005-05-31 22:19

Ich trau mich immer nicht so recht, Fremdforen hier zu verlinken bzw. fremde Inhalte zu kopieren, daher die PN. Außerdem wusste ich nicht, ob das wirklich klappt :)