FTP in VServer Umgebung - Bind Problem
Posted: 2004-10-28 20:30
Hi,
ich habe einen Root mit 2 laufenden Vserver die logischer Weise ein eigenes virtuelles Netzwerkinterface haben. Auf beiden leuft ein FTP Server nun würde ich gerne auf dem Root an sich noch einen FTP Server installieren. Pro FPTD ist meine Wahl. Habe die Config so weit auch angepasst, und per BIND IP Adresse in der Config auf die Root IP hingewiesen, da er ja sonst probieren würde auf 0.0.0.0 zu binden und das nicht geht da auf den 2 andren Interfaces bereits ein FTP Server leuft.
Allerdings nimmt er das Bind IP Adresse nicht an, jedes mal will er auf 0.0.0.0 starten.
Benutzt wird Debian 3.0 mit util-vserver-0.30 Kernel 2.4.27-vs1.29 und ProFTPD Version 1.2.10 (stable)
Die Config sieht wie folgt aus.
Wäre über Ideen dankbar.
Bye Nils
ich habe einen Root mit 2 laufenden Vserver die logischer Weise ein eigenes virtuelles Netzwerkinterface haben. Auf beiden leuft ein FTP Server nun würde ich gerne auf dem Root an sich noch einen FTP Server installieren. Pro FPTD ist meine Wahl. Habe die Config so weit auch angepasst, und per BIND IP Adresse in der Config auf die Root IP hingewiesen, da er ja sonst probieren würde auf 0.0.0.0 zu binden und das nicht geht da auf den 2 andren Interfaces bereits ein FTP Server leuft.
Allerdings nimmt er das Bind IP Adresse nicht an, jedes mal will er auf 0.0.0.0 starten.
Code: Select all
Oct 28 19:44:35 ************ proftpd[17870]: ************.dedicated.hosteurope.de - Failed binding to 0.0.0.0, port 21: Address already in use
Oct 28 19:44:35 ************ proftpd[17870]: ************.dedicated.hosteurope.de - Check the ServerType directive to ensure you are configured correctly.Die Config sieht wie folgt aus.
Code: Select all
# This is a basic ProFTPD configuration file (rename it to
# 'proftpd.conf' for actual use. It establishes a single server
# and a single anonymous login. It assumes that you have a user/group
# "nobody" and "ftp" for normal operation and anon.
ServerName "**********"
# Port 21 is the standard FTP port.
Port 21
# Umask 022 is a good standard umask to prevent new dirs and files
# from being group and world writable.
Umask 022
# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd).
MaxInstances 30
# Set the user and group under which the server will run.
User nobody
Group nogroup
# To cause every FTP user to be "jailed" (chrooted) into their home
# directory, uncomment this line.
#DefaultRoot ~
# Normally, we want files to be overwriteable.
<Directory />
AllowOverwrite on
</Directory>
# A basic anonymous configuration, no upload directories. If you do not
# want anonymous users, simply delete this entire <Anonymous> section.
<Anonymous ~ftp>
User ftp
Group ftp
# We want clients to be able to login with "anonymous" as well as "ftp"
UserAlias anonymous ftp
# Limit the maximum number of anonymous logins
MaxClients 10
# We want 'welcome.msg' displayed at login, and '.message' displayed
# in each newly chdired directory.
DisplayFirstChdir .message
# Limit WRITE everywhere in the anonymous chroot
<Limit WRITE>
DenyAll
</Limit>
</Anonymous>
<Global>
AllowForeignAddress off
AllowRetrieveRestart on
AllowStoreRestart on
IdentLookups off
RootLogin off
RequireValidShell on
AllowOverwrite on
DefaultRoot ~
DeleteAbortedStores off
HiddenStor off
MaxClients none
MaxClientsPerHost 1
ServerIdent on
</Global>
UseReverseDNS off
IdentLookups off
TimeoutIdle 60
ServerAdmin ***@**********.de
RequireValidShell on
AllowRetrieveRestart on
AllowStoreRestart on
DeleteAbortedStores off
HiddenStor off
AllowOverwrite on
ServerType standalone
Bind ************
Bye Nils