RootForum Community

Code: Select all

connect: Connection refused
connect:errno=29

Code: Select all

#
# /etc/apache2/httpd.conf
#
# This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about
# the directives.

# Based upon the default apache configuration file that ships with apache,
# which is based upon the NCSA server configuration files originally by Rob
# McCool. This file was knocked together by Peter Poeml <poeml+apache@suse.de>.

# If possible, avoid changes to this file. It does mainly contain Include
# statements and global settings that can/should be overridden in the
# configuration of your virtual hosts.


# Overview of include files, chronologically:
#
# httpd.conf
#  |
#  |-- uid.conf  . . . . . . . . . . . . . .  UserID/GroupID to run under
#  |-- server-tuning.conf  . . . . . . . . .  sizing of the server (how many processes to start, ...)
#  |-- sysconfig.d/loadmodule.conf . . . . .  [*] load these modules
#  |-- listen.conf . . . . . . . . . . . . .  IP adresses / ports to listen on
#  |-- mod_log_config.conf . . . . . . . . .  define logging formats
#  |-- sysconfig.d/global.conf . . . . . . .  [*] server-wide general settings
#  |-- mod_status.conf . . . . . . . . . . .  restrict access to mod_status (server monitoring)
#  |-- mod_info.conf . . . . . . . . . . . .  restrict access to mod_info
#  |-- mod_autoindex-defaults.conf . . . . .  defaults for displaying of server-generated directory listings
#  |-- mod_mime-defaults.conf  . . . . . . .  defaults for mod_mime configuration
#  |-- errors.conf . . . . . . . . . . . . .  customize error responses
#  |-- ssl-global.conf . . . . . . . . . . .  SSL conf that applies to default server _and all_ virtual hosts
#  |
#  |-- default-server.conf . . . . . . . . .  set up the default server that replies to non-virtual-host requests
#  |    |--mod_userdir.conf  . . . . . . . .  enable UserDir (if mod_userdir is loaded)
#  |    `--conf.d/apache2-manual?conf  . . .  add the docs ('?' = if installed)
#  |
#  |-- sysconfig.d/include.conf  . . . . . .  [*] your include files
#  |                                             (for each file to be included here, put its name
#  |                                              into APACHE_INCLUDE_* in /etc/sysconfig/apache2)
#  |
#  `-- vhosts.d/ . . . . . . . . . . . . . .  for each virtual host, place one file here
#       `-- *.conf . . . . . . . . . . . . .     (*.conf is automatically included)
#
#
# Files marked [*] are created from sysconfig upon server restart: instead of
# these files, you edit /etc/sysconfig/apache2



#  Filesystem layout:
#
# /etc/apache2/
#  |-- conf.d/
#  |   |-- apache2-manual.conf . . . . . . .  conf that comes with apache2-doc
#  |   |-- mod_php4.conf . . . . . . . . . .  (example) conf that comes with apache2-mod_php4
#  |   `-- ... . . . . . . . . . . . . . . .  other configuration added by packages
#  |-- default-server.conf
#  |-- errors.conf
#  |-- httpd.conf  . . . . . . . . . . . . .  top level configuration file
#  |-- listen.conf
#  |-- magic
#  |-- mime.types -> ../mime.types
#  |-- mod_autoindex-defaults.conf
#  |-- mod_info.conf
#  |-- mod_log_config.conf
#  |-- mod_mime-defaults.conf
#  |-- mod_perl-startup.pl
#  |-- mod_status.conf
#  |-- mod_userdir.conf
#  |-- server-tuning.conf
#  |-- ssl-global.conf
#  |-- ssl.crl/  . . . . . . . . . . . . . .  PEM-encoded X.509 Certificate Revocation Lists (CRL)
#  |-- ssl.crt/  . . . . . . . . . . . . . .  PEM-encoded X.509 Certificates
#  |-- ssl.csr/  . . . . . . . . . . . . . .  PEM-encoded X.509 Certificate Signing Requests
#  |-- ssl.key/  . . . . . . . . . . . . . .  PEM-encoded RSA Private Keys
#  |-- ssl.prm/  . . . . . . . . . . . . . .  public DSA Parameter Files
#  |-- sysconfig.d/  . . . . . . . . . . . .  files that are created from /etc/sysconfig/apache2
#  |   |-- global.conf
#  |   |-- include.conf
#  |   `-- loadmodule.conf
#  |-- uid.conf
#  `-- vhosts.d/ . . . . . . . . . . . . . .  put your virtual host configuration (*.conf) here
#      |-- vhost-ssl.template
#      `-- vhost.template



### Global Environment ######################################################
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests.

# run under this user/group id
Include /etc/apache2/uid.conf

# - how many server processes to start (server pool regulation)
# - usage of KeepAlive
Include /etc/apache2/server-tuning.conf

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog /var/log/apache2/error_log

# generated from APACHE_MODULES in /etc/sysconfig/apache2
Include /etc/apache2/sysconfig.d/loadmodule.conf

# IP addresses / ports to listen on
Include /etc/apache2/listen.conf

# predefined logging formats
Include /etc/apache2/mod_log_config.conf

# generated from global settings in /etc/sysconfig/apache2
Include /etc/apache2/sysconfig.d/global.conf

# optional mod_status, mod_info
Include /etc/apache2/mod_status.conf
Include /etc/apache2/mod_info.conf

# configuration of server-generated directory listings
Include /etc/apache2/mod_autoindex-defaults.conf

# associate MIME types with filename extensions
TypesConfig /etc/apache2/mime.types
DefaultType text/plain
Include /etc/apache2/mod_mime-defaults.conf

# set up (customizable) error responses
Include /etc/apache2/errors.conf

# global (server-wide) SSL configuration, that is not specific to
# any virtual host
Include /etc/apache2/ssl-global.conf

# forbid access to the entire filesystem by default
<Directory />
    Options None
    AllowOverride None
    Order deny,allow
    Deny from all
</Directory>

# use .htaccess files for overriding,
AccessFileName .htaccess
# and never show them
<Files ~ "^.ht">
    Order allow,deny
    Deny from all
</Files>

# List of resources to look for when the client requests a directory
DirectoryIndex index.html index.html.var

### 'Main' server configuration #############################################
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
Include /etc/apache2/default-server.conf

# Another way to include your own files
#
# The file below is generated from /etc/sysconfig/apache2,
# include arbitrary files as named in APACHE_CONF_INCLUDE_FILES and
# APACHE_CONF_INCLUDE_DIRS
Include /etc/apache2/sysconfig.d/include.conf


### Virtual server configuration ############################################
#
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs-2.0/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.
#
Include /etc/apache2/vhosts.d/*.conf


# Note: instead of adding your own configuration here, consider
#       adding it in your own file (/etc/apache2/httpd.conf.local)
#       putting its name into APACHE_CONF_INCLUDE_FILES in
#       /etc/sysconfig/apache2 -- this will make system updates
#       easier :)

## CONFIXX

Include /etc/apache2/confixx_mhost.conf

# Dieser Eintrag sollte unbedingt am Ende der Datei bleiben

## /CONFIXX

Code: Select all

##
##  SSL Global Context
##
##  All SSL configuration in this context applies both to
##  the main server and all SSL-enabled virtual hosts.
##

# These are the configuration directives to instruct the server how to
# serve pages over an https connection. For detailing information about these
# directives see <URL:http://httpd.apache.org/docs-2.0/mod/mod_ssl.html>
#
#   For the moment, see <URL:http://www.modssl.org/docs/> for this info.
#   The documents are still being prepared from material donated by the
#   modssl project.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.

# This global SSL configuration is ignored if
# "SSL" is not defined, or if "NOSSL" is defined.
<IfDefine SSL>
<IfDefine !NOSSL>
<IfModule mod_ssl.c>

        #
        #   Some MIME-types for downloading Certificates and CRLs
        #
        AddType application/x-x509-ca-cert .crt
        AddType application/x-pkcs7-crl    .crl

        #   Pass Phrase Dialog:
        #   Configure the pass phrase gathering process.
        #   The filtering dialog program (`builtin' is a internal
        #   terminal dialog) has to provide the pass phrase on stdout.
        SSLPassPhraseDialog  builtin

        #   Inter-Process Session Cache:
        #   Configure the SSL Session Cache: First the mechanism
        #   to use and second the expiring timeout (in seconds).
        #   shm means the same as shmht.
        #   Note that on most platforms shared memory segments are not allowed to be on
        #   network-mounted drives, so in that case you need to use the dbm method.
        #SSLSessionCache        none
        #SSLSessionCache         dbm:/var/lib/apache2/ssl_scache
        #SSLSessionCache        shmht:/var/lib/apache2/ssl_scache(512000)
        SSLSessionCache         shmcb:/var/lib/apache2/ssl_scache
        SSLSessionCacheTimeout  600

        #   Semaphore:
        #   Configure the path to the mutual exclusion semaphore the
        #   SSL engine uses internally for inter-process synchronization.
        #SSLMutex  file:/var/lib/apache2/ssl_mutex
        SSLMutex  sem

        #   Pseudo Random Number Generator (PRNG):
        #   Configure one or more sources to seed the PRNG of the
        #   SSL library. The seed data should be of good random quality.
        #   WARNING! On some platforms /dev/random blocks if not enough entropy
        #   is available. This means you then cannot use the /dev/random device
        #   because it would lead to very long connection times (as long as
        #   it requires to make more entropy available). But usually those
        #   platforms additionally provide a /dev/urandom device which doesn't
        #   block. So, if available, use this one instead. Read the mod_ssl User
        #   Manual for more details.
        SSLRandomSeed startup builtin
        SSLRandomSeed connect builtin
        #SSLRandomSeed startup file:/dev/random  512
        #SSLRandomSeed connect file:/dev/random  512
        #SSLRandomSeed startup file:/dev/urandom 512
        #SSLRandomSeed connect file:/dev/urandom 512

</IfModule>
</IfDefine>
</IfDefine>

Code: Select all

p15104961:/etc/apache2 # httpd2 -DSSL
[Mon May 10 22:48:54 2004] [warn] NameVirtualHost 217.160.131.68:80 has no VirtualHosts
(98)Address already in use: make_sock: could not bind to address [::]:443
no listening sockets available, shutting down
Unable to open logs