RootForum Community

Code: Select all

[Mon Dec 15 17:58:26 2003] [notice] child pid 11882 exit signal Segmentation fault (11)
[Mon Dec 15 17:58:26 2003] [notice] child pid 11868 exit signal Segmentation fault (11)
[Mon Dec 15 17:58:26 2003] [notice] child pid 11809 exit signal Segmentation fault (11)
[Mon Dec 15 21:49:49 2003] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Mon Dec 15 21:49:50 2003] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Mon Dec 15 22:19:31 2003] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Mon Dec 15 22:19:32 2003] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Mon Dec 15 22:30:49 2003] [notice] child pid 1572 exit signal Segmentation fault (11)
[Mon Dec 15 22:58:11 2003] [notice] child pid 2721 exit signal Segmentation fault (11)
[Mon Dec 15 23:22:42 2003] [notice] child pid 3450 exit signal Segmentation fault (11)
[Tue Dec 16 00:33:21 2003] [notice] caught SIGTERM, shutting down
[Tue Dec 16 14:08:18 2003] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Tue Dec 16 14:08:19 2003] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Wed Dec 17 00:03:01 2003] [notice] caught SIGTERM, shutting down
[Wed Dec 17 00:03:20 2003] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Wed Dec 17 00:03:22 2003] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Thu Dec 18 00:03:00 2003] [notice] caught SIGTERM, shutting down
[Thu Dec 18 00:03:09 2003] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Thu Dec 18 00:03:09 2003] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
convert: Corrupt JPEG data: found marker 0xd9 instead of RST6 (/srv/www/webgear/html/users/geschichte-online/Huette.jpg).
convert: Corrupt JPEG data: found marker 0xd9 instead of RST6 (/srv/www/webgear/html/users/geschichte-online/Huette.jpg).
[Thu Dec 18 22:47:29 2003] [error] server reached MaxClients setting, consider raising the MaxClients setting
[Fri Dec 19 00:03:01 2003] [warn] child process 11923 still did not exit, sending a SIGTERM
[Fri Dec 19 00:03:01 2003] [warn] child process 11923 still did not exit, sending a SIGTERM
[Fri Dec 19 00:03:02 2003] [notice] caught SIGTERM, shutting down
[Fri Dec 19 00:03:09 2003] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Fri Dec 19 00:03:11 2003] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Sat Dec 20 00:03:01 2003] [notice] caught SIGTERM, shutting down
[Sat Dec 20 00:03:06 2003] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Sat Dec 20 00:03:08 2003] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Sun Dec 21 00:03:01 2003] [notice] caught SIGTERM, shutting down
[Sun Dec 21 00:03:10 2003] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Sun Dec 21 00:03:11 2003] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Mon Dec 22 00:03:01 2003] [notice] caught SIGTERM, shutting down
[Mon Dec 22 00:03:08 2003] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Mon Dec 22 00:03:16 2003] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
convert: Corrupt JPEG data: found marker 0xd9 instead of RST3 (/srv/www/webgear/html/users/benschmarkus/Pics/Micky.jpg).
convert: Corrupt JPEG data: found marker 0xd9 instead of RST3 (/srv/www/webgear/html/users/benschmarkus/Pics/Micky.jpg).
[Tue Dec 23 00:03:01 2003] [notice] caught SIGTERM, shutting down
[Tue Dec 23 00:03:07 2003] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Tue Dec 23 00:03:11 2003] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Wed Dec 24 00:03:01 2003] [notice] caught SIGTERM, shutting down
[Wed Dec 24 00:03:12 2003] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Wed Dec 24 00:03:15 2003] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Thu Dec 25 00:03:00 2003] [notice] caught SIGTERM, shutting down
[Thu Dec 25 00:03:04 2003] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Thu Dec 25 00:03:05 2003] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
convert: Corrupt JPEG data: premature end of data segment (/srv/www/webgear/html/users/liv-tyler//Me2Hell.JPG).
convert: Corrupt JPEG data: premature end of data segment (/srv/www/webgear/html/users/liv-tyler//Me2Hell.JPG).
[Fri Dec 26 00:03:01 2003] [notice] caught SIGTERM, shutting down
[Fri Dec 26 00:03:10 2003] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Fri Dec 26 00:03:11 2003] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Sat Dec 27 00:03:01 2003] [notice] caught SIGTERM, shutting down
[Sat Dec 27 00:03:06 2003] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Sat Dec 27 00:03:09 2003] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Sun Dec 28 00:03:01 2003] [notice] caught SIGTERM, shutting down
[Sun Dec 28 00:03:07 2003] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Sun Dec 28 00:03:08 2003] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Sun Dec 28 20:20:08 2003] [error] server reached MaxClients setting, consider raising the MaxClients setting
[Mon Dec 29 00:03:01 2003] [notice] caught SIGTERM, shutting down
[Mon Dec 29 00:03:23 2003] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Mon Dec 29 00:03:24 2003] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Mon Dec 29 18:10:22 2003] [error] server reached MaxClients setting, consider raising the MaxClients setting
[Tue Dec 30 00:03:01 2003] [notice] caught SIGTERM, shutting down
[Tue Dec 30 00:03:12 2003] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Tue Dec 30 00:03:14 2003] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
convert: Empty input file (/srv/www/webgear/html/users/wastl/C___Wastl__Inter2__Toene) [Is a directory].
Application transferred too few scanlines
convert: Invalid colormap index (/srv/www/webgear/html/users/devilnichttf/dntf.gif).
[Wed Dec 31 00:03:01 2003] [notice] caught SIGTERM, shutting down
[Wed Dec 31 00:03:11 2003] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Wed Dec 31 00:03:13 2003] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
convert: Invalid colormap index (/srv/www/webgear/html/users/devilnichttf/dntf.gif).
convert: Invalid colormap index (/srv/www/webgear/html/users/devilnichttf/dntf.gif).
[Thu Jan 01 00:03:01 2004] [notice] caught SIGTERM, shutting down
[Thu Jan 01 00:03:07 2004] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Thu Jan 01 00:03:09 2004] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Fri Jan 02 00:03:01 2004] [notice] caught SIGTERM, shutting down
[Fri Jan 02 00:03:10 2004] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Fri Jan 02 00:03:14 2004] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Sat Jan 03 00:03:00 2004] [notice] caught SIGTERM, shutting down
[Sat Jan 03 00:03:21 2004] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Sat Jan 03 00:03:23 2004] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
convert: Not a JPEG file: starts with 0x4a 0x47 (/srv/www/webgear/html/users/mariodali//c93a3cf4fc80e42d.jpg).
Application transferred too few scanlines
[Sun Jan 04 00:03:01 2004] [notice] caught SIGTERM, shutting down
[Sun Jan 04 00:03:08 2004] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Sun Jan 04 00:03:12 2004] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Mon Jan 05 00:03:02 2004] [notice] caught SIGTERM, shutting down
[Mon Jan 05 00:03:10 2004] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Mon Jan 05 00:03:11 2004] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
convert: Corrupt JPEG data: premature end of data segment (/srv/www/webgear/html/users/marcelkamlot/102_0232.JPG).
convert: Corrupt JPEG data: premature end of data segment (/srv/www/webgear/html/users/marcelkamlot/102_0232.JPG).
[Tue Jan 06 00:03:01 2004] [notice] caught SIGTERM, shutting down
[Tue Jan 06 00:03:09 2004] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Tue Jan 06 00:03:11 2004] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Wed Jan 07 00:03:02 2004] [notice] caught SIGTERM, shutting down
[Wed Jan 07 00:03:17 2004] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Wed Jan 07 00:03:19 2004] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Thu Jan 08 00:03:01 2004] [notice] caught SIGTERM, shutting down
[Thu Jan 08 00:03:11 2004] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Thu Jan 08 00:03:13 2004] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Fri Jan 09 00:03:01 2004] [notice] caught SIGTERM, shutting down
[Fri Jan 09 00:03:13 2004] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Fri Jan 09 00:03:14 2004] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Sat Jan 10 00:03:01 2004] [notice] caught SIGTERM, shutting down
[Sat Jan 10 00:03:08 2004] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Sat Jan 10 00:03:10 2004] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Sun Jan 11 00:03:01 2004] [notice] caught SIGTERM, shutting down
[Sun Jan 11 00:03:12 2004] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Sun Jan 11 00:03:14 2004] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Sun Jan 11 22:55:22 2004] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Sun Jan 11 22:55:23 2004] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Mon Jan 12 00:03:00 2004] [notice] caught SIGTERM, shutting down
[Mon Jan 12 00:03:17 2004] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Mon Jan 12 00:03:18 2004] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Tue Jan 13 00:03:01 2004] [notice] caught SIGTERM, shutting down
[Tue Jan 13 00:03:10 2004] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Tue Jan 13 00:03:12 2004] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
convert: Corrupt JPEG data: premature end of data segment (/srv/www/webgear/html/users/betzi006/Mama_Geburtstag_und_Tanzpalast_75_Cent_Party_050.jpg).
convert: Corrupt JPEG data: premature end of data segment (/srv/www/webgear/html/users/betzi006/Mama_Geburtstag_und_Tanzpalast_75_Cent_Party_050.jpg).
convert: Corrupt JPEG data: premature end of data segment (/srv/www/webgear/html/users/betzi006/Mama_Geburtstag_und_Tanzpalast_75_Cent_Party_050.jpg).
convert: Corrupt JPEG data: premature end of data segment (/srv/www/webgear/html/users/betzi006/Mama_Geburtstag_und_Tanzpalast_75_Cent_Party_050.jpg).
convert: Corrupt JPEG data: premature end of data segment (/srv/www/webgear/html/users/betzi006/Mama_Geburtstag_und_Tanzpalast_75_Cent_Party_050.jpg).
convert: Corrupt JPEG data: premature end of data segment (/srv/www/webgear/html/users/betzi006/Mama_Geburtstag_und_Tanzpalast_75_Cent_Party_050.jpg).
[Wed Jan 14 00:03:01 2004] [notice] caught SIGTERM, shutting down
[Wed Jan 14 00:03:10 2004] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Wed Jan 14 00:03:12 2004] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
convert: FPXLibraryIsNotAvailable (/srv/www/webgear/html/users/clan-dl/JonnY.doc).
convert: FPXLibraryIsNotAvailable (/srv/www/webgear/html/users/clan-dl/JonnY.doc).
[Thu Jan 15 00:03:00 2004] [notice] caught SIGTERM, shutting down
[Thu Jan 15 00:03:07 2004] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Thu Jan 15 00:03:09 2004] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
convert: Corrupt JPEG data: found marker 0xd9 instead of RST4 (/srv/www/webgear/html/users/luli//GrueneAugen.jpg).
convert: Corrupt JPEG data: found marker 0xd9 instead of RST4 (/srv/www/webgear/html/users/luli//GrueneAugen.jpg).
[Thu Jan 15 22:01:26 2004] [error] server reached MaxClients setting, consider raising the MaxClients setting
[Fri Jan 16 00:03:01 2004] [notice] caught SIGTERM, shutting down
[Fri Jan 16 00:03:10 2004] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Fri Jan 16 00:03:11 2004] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Sat Jan 17 00:03:00 2004] [notice] caught SIGTERM, shutting down
[Sat Jan 17 00:03:12 2004] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Sat Jan 17 00:03:16 2004] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Sun Jan 18 00:03:01 2004] [notice] caught SIGTERM, shutting down
[Sun Jan 18 00:03:09 2004] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Sun Jan 18 00:03:11 2004] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Sun Jan 18 11:08:20 2004] [error] server reached MaxClients setting, consider raising the MaxClients setting
[Sun Jan 18 11:38:30 2004] [notice] caught SIGTERM, shutting down
[Sun Jan 18 11:42:41 2004] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Sun Jan 18 11:42:42 2004] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Sun Jan 18 12:06:17 2004] [error] server reached MaxClients setting, consider raising the MaxClients setting
[Sun Jan 18 12:07:24 2004] [notice] child pid 2380 exit signal Segmentation fault (11)
[Sun Jan 18 12:07:24 2004] [notice] child pid 2105 exit signal Segmentation fault (11)
[Sun Jan 18 15:48:38 2004] [notice] caught SIGTERM, shutting down
[Sun Jan 18 15:48:41 2004] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Sun Jan 18 15:48:42 2004] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Sun Jan 18 15:50:39 2004] [error] server reached MaxClients setting, consider raising the MaxClients setting
[Sun Jan 18 15:53:49 2004] [notice] caught SIGTERM, shutting down
[Sun Jan 18 15:53:53 2004] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Sun Jan 18 15:53:55 2004] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Sun Jan 18 15:55:43 2004] [error] server reached MaxClients setting, consider raising the MaxClients setting
[Sun Jan 18 16:33:25 2004] [notice] caught SIGTERM, shutting down
[Sun Jan 18 16:33:29 2004] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Sun Jan 18 16:33:43 2004] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Sun Jan 18 16:33:44 2004] [error] server reached MaxClients setting, consider raising the MaxClients setting
[Sun Jan 18 16:34:13 2004] [warn] child process 19899 still did not exit, sending a SIGTERM
[Sun Jan 18 16:34:13 2004] [warn] child process 19905 still did not exit, sending a SIGTERM
[Sun Jan 18 16:34:13 2004] [warn] child process 19909 still did not exit, sending a SIGTERM
[Sun Jan 18 16:34:13 2004] [warn] child process 19917 still did not exit, sending a SIGTERM
[Sun Jan 18 16:34:13 2004] [warn] child process 19923 still did not exit, sending a SIGTERM
[Sun Jan 18 16:34:13 2004] [notice] caught SIGTERM, shutting down
[Sun Jan 18 16:34:18 2004] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Sun Jan 18 16:34:32 2004] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Sun Jan 18 16:34:33 2004] [error] server reached MaxClients setting, consider raising the MaxClients setting
[Sun Jan 18 20:14:36 2004] [warn] child process 20045 still did not exit, sending a SIGTERM
[Sun Jan 18 20:14:37 2004] [warn] child process 20046 still did not exit, sending a SIGTERM
[Sun Jan 18 20:14:37 2004] [warn] child process 20047 still did not exit, sending a SIGTERM
[Sun Jan 18 20:14:37 2004] [warn] child process 20049 still did not exit, sending a SIGTERM
[Sun Jan 18 20:14:37 2004] [warn] child process 20050 still did not exit, sending a SIGTERM


...

GEHT SEITENLANG SO WEITER


...

[Sun Jan 18 20:14:39 2004] [warn] child process 20297 still did not exit, sending a SIGTERM
[Sun Jan 18 20:14:39 2004] [warn] child process 20298 still did not exit, sending a SIGTERM
[Sun Jan 18 20:14:39 2004] [warn] child process 20299 still did not exit, sending a SIGTERM
[Sun Jan 18 20:14:39 2004] [warn] child process 20302 still did not exit, sending a SIGTERM
[Sun Jan 18 20:14:39 2004] [warn] child process 20303 still did not exit, sending a SIGTERM
[Sun Jan 18 20:14:39 2004] [warn] child process 20304 still did not exit, sending a SIGTERM
[Sun Jan 18 20:14:39 2004] [warn] child process 20305 still did not exit, sending a SIGTERM
[Sun Jan 18 20:14:39 2004] [warn] child process 20306 still did not exit, sending a SIGTERM
[Sun Jan 18 20:14:39 2004] [warn] child process 20307 still did not exit, sending a SIGTERM
[Sun Jan 18 20:14:39 2004] [warn] child process 20308 still did not exit, sending a SIGTERM
[Sun Jan 18 20:14:39 2004] [warn] child process 20309 still did not exit, sending a SIGTERM
[Sun Jan 18 20:14:39 2004] [warn] child process 20310 still did not exit, sending a SIGTERM
[Sun Jan 18 20:14:39 2004] [warn] child process 20311 still did not exit, sending a SIGTERM
[Sun Jan 18 20:14:43 2004] [notice] caught SIGTERM, shutting down
[Sun Jan 18 20:14:48 2004] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2)
[Sun Jan 18 20:15:12 2004] [notice] Apache/2.0.46 (Linux/SuSE) configured -- resuming normal operations
[Sun Jan 18 20:15:13 2004] [error] server reached MaxClients setting, consider raising the MaxClients setting

Code: Select all

#
# Based upon the NCSA server configuration files originally by Rob McCool.
#
# This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# The configuration directives are grouped into three basic sections:
#  1. Directives that control the operation of the Apache server process as a
#     whole (the 'global environment').
#  2. Directives that define the parameters of the 'main' or 'default' server,
#     which responds to requests that aren't handled by a virtual host.
#     These directives also provide default values for the settings
#     of all virtual hosts.
#  3. Settings for virtual hosts, which allow Web requests to be sent to
#     different IP addresses or hostnames and have them handled by the
#     same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log"
# with ServerRoot set to "/srv/www" will be interpreted by the
# server as "/srv/www//var/log/apache2/foo.log".
#

### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE!  If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs-2.0/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot "/srv/www"

#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
<IfModule !mpm_winnt.c>
<IfModule !mpm_netware.c>
#LockFile /var/log/apache2/accept.lock
</IfModule>
</IfModule>

#
# ScoreBoardFile: File used to store internal server process information.
# If unspecified (the default), the scoreboard will be stored in an
# anonymous shared memory segment, and will be unavailable to third-party
# applications.
# If specified, ensure that no two invocations of Apache share the same
# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
#
<IfModule !mpm_netware.c>
<IfModule !perchild.c>
#ScoreBoardFile /var/log/apache2/apache_runtime_status
</IfModule>
</IfModule>


#
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
<IfModule !mpm_netware.c>
PidFile /var/run/httpd2.pid
</IfModule>

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15

##
## Server-Pool Size Regulation (MPM specific)
## 

# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule prefork.c>
StartServers       250
MinSpareServers    250
MaxSpareServers    250
MaxClients         250
MaxRequestsPerChild  0
</IfModule>

# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule worker.c>
StartServers         2
MaxClients         150
MinSpareThreads     25
MaxSpareThreads     75 
ThreadsPerChild     25
MaxRequestsPerChild  0
</IfModule>

# perchild MPM
# NumServers: constant number of server processes
# StartThreads: initial number of worker threads in each server process
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# MaxThreadsPerChild: maximum number of worker threads in each server process
# MaxRequestsPerChild: maximum number of connections per server process
<IfModule perchild.c>
AcceptMutex fcntl
NumServers           5
StartThreads         5
MinSpareThreads      5
MaxSpareThreads     10
MaxThreadsPerChild  20
MaxRequestsPerChild  0
</IfModule>

# WinNT MPM
# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum  number of requests a server process serves
<IfModule mpm_winnt.c>
ThreadsPerChild 250
MaxRequestsPerChild  0
</IfModule>

# BeOS MPM
# StartThreads: how many threads do we initially spawn?
# MaxClients:   max number of threads we can have (1 thread == 1 client)
# MaxRequestsPerThread: maximum number of requests each thread will process
<IfModule beos.c>
StartThreads               10
MaxClients                 50
MaxRequestsPerThread       10000
</IfModule>    

# NetWare MPM
# ThreadStackSize: Stack size allocated for each worker thread
# StartThreads: Number of worker threads launched at server startup
# MinSpareThreads: Minimum number of idle threads, to handle request spikes
# MaxSpareThreads: Maximum number of idle threads
# MaxThreads: Maximum number of worker threads alive at the same time
# MaxRequestsPerChild: Maximum  number of requests a thread serves. It is 
#                      recommended that the default value of 0 be set for this
#                      directive on NetWare.  This will allow the thread to 
#                      continue to service requests indefinitely.                          
<IfModule mpm_netware.c>
ThreadStackSize      65536
StartThreads           250
MinSpareThreads         25
MaxSpareThreads        250
MaxThreads            1000
MaxRequestsPerChild      0
</IfModule>

# OS/2 MPM
# StartServers: Number of server processes to maintain
# MinSpareThreads: Minimum number of idle threads per process, 
#                  to handle request spikes
# MaxSpareThreads: Maximum number of idle threads per process
# MaxRequestsPerChild: Maximum number of connections per server process
<IfModule mpmt_os2.c>
StartServers           2
MinSpareThreads        5
MaxSpareThreads       10
MaxRequestsPerChild    0
</IfModule>

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#
#Listen 12.34.56.78:80

Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#

# Module mod_deflate (compression)
LoadModule deflate_module /usr/lib/apache2/mod_deflate.so

# Module PHP 4
LoadModule php4_module /usr/lib/apache2-prefork/libphp4.so

# Note:
#
# The file that is included after this comment can contain LoadModule statements. 
# It is created by the start script (/etc/init.d/apache2).
# The list of enabled modules is set in /etc/sysconfig/apache2.
#

Include /etc/apache2/suse_loadmodule.conf

# Then we set some other options according to the settings in /etc/sysconfig/apache2.
Include /etc/apache2/suse_misc.conf


#
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#
#ExtendedStatus On

### Section 2: 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

<IfModule !mpm_winnt.c>
<IfModule !mpm_netware.c>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
#  . On SCO (ODT 3) use "User nouser" and "Group nogroup".
#  . On HPUX you may not be able to use shared memory as nobody, and the
#    suggested workaround is to create a user www and use that user.
#  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
#  when the value of (unsigned)Group is above 60000; 
#  don't use Group #-1 on these systems!
#
User wwwrun
Group www
</IfModule>
</IfModule>

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin webmaster@web-gear.com

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work.  See also the UseCanonicalName directive.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make 
# redirections work in a sensible way.
#
ServerName 213.239.194.207:80

#
# UseCanonicalName: Determines how Apache constructs self-referencing 
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client.  When set "On", Apache will use the value of the
# ServerName directive.
#
UseCanonicalName Off

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/srv/www/webgear/html"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories). 
#
# First, we configure the "default" to be a very restrictive set of 
# features.  
#
<Directory />
    Options -ExecCGI -FollowSymLinks -Includes -Indexes -Multiviews
    AllowOverride None
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/srv/www/*/html">

#
# Possible values for the Options directive are "None", "All",
# or any combination of:
#   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important.  Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#options
# for more information.
#
    Options -ExecCGI -FollowSymLinks -Includes -Indexes -Multiviews

#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
#   Options FileInfo AuthConfig Limit
#
    AllowOverride AuthConfig

#
# Controls who can get stuff from this server.
#
    Order allow,deny
    Allow from all

</Directory>

#
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received.
#

#<IfModule mod_userdir.c>
	# Note that the name of the user directory ("public_html") cannot easily be
	# changed here, since it is a compile time setting. The apache package
	# would have to be rebuilt. You could work around by deleting
	# /usr/sbin/suexec, but then all scripts from the directories would be
	# executed with the UID of the webserver.
	# 
	# To rebuild apache with another setting you need to change the 
	# %userdir define in the spec file. 
#
#	UserDir public_html
#
#	<Directory /home/*/public_html>
#
#		AllowOverride FileInfo AuthConfig Limit Indexes
#		Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
#
#		<Limit GET POST OPTIONS PROPFIND>
#			Order allow,deny
#			Allow from all
#		</Limit>
#
#		<LimitExcept GET POST OPTIONS PROPFIND>
#			Order deny,allow
#			Deny from all
#		</LimitExcept>
#
#	</Directory>
#
#</IfModule>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents.  The MultiViews Option can be used for the 
# same purpose, but it is much slower.
#
DirectoryIndex index.html index.php index.htm

#
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives.  See also the AllowOverride 
# directive.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<Files ~ "^.ht">
    Order allow,deny
    Deny from all
</Files>

#
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#
TypesConfig /etc/apache2/mime.types

#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
<IfModule mod_mime_magic.c>
    MIMEMagicFile /etc/apache2/magic
</IfModule>

#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

#
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted 
# filesystems.  On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablemmap
#
#EnableMMAP off

#
# EnableSendfile: Control whether the sendfile kernel support is 
# used  to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted 
# filesystems.  Please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablesendfile
#
#EnableSendfile off

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog /var/log/apache2/error_log

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i"" combined
LogFormat "%h %l %u %t "%r" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

# You need to enable mod_logio.c to use %I and %O
#LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i" %I %O" combinedio

#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here.  Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog /var/log/apache2/access_log common

#
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#
#CustomLog /var/log/apache2/referer_log referer
#CustomLog /var/log/apache2/agent_log agent

#
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog /var/log/apache2/access_log combined

#
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of:  Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
#
#ServerTokens OS

#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory 
# listings, mod_status and mod_info output etc., but not CGI generated 
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of:  On | Off | EMail
#
#ServerSignature On

#
# Aliases: Add here as many aliases as you need (with no limit). The format is 
# Alias fakename realname
#
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL.  So "/icons" isn't aliased in this
# example, only "/icons/".  If the fakename is slash-terminated, then the 
# realname must also be slash terminated, and if the fakename omits the 
# trailing slash, the realname must also omit it.
#
# We include the /icons/ alias for FancyIndexed directory listings.  If you
# do not use FancyIndexing, you may comment this out.
#
#Alias /icons/ "/usr/share/apache2/icons/"
#
#<Directory "/usr/share/apache2/icons">
#    Options Indexes MultiViews
#    AllowOverride None
#    Order allow,deny
#    Allow from all
#</Directory>

#
# This should be changed to the ServerRoot/manual/.  The alias provides
# the manual, even if you choose to move your DocumentRoot.  You may comment
# this out if you do not care for the documentation.
#
#Alias /manual "/usr/share/apache2/manual"
#
#<Directory "/usr/share/apache2/manual">
#    Options Indexes FollowSymLinks MultiViews IncludesNoExec
#    AddOutputFilter Includes html
#    AllowOverride None
#    Order allow,deny
#    Allow from all
#</Directory>

#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
#
#ScriptAlias /cgi-bin/ "/srv/www/cgi-bin/"

<IfModule mod_cgid.c>
#
# Additional to mod_cgid.c settings, mod_cgid has Scriptsock <path>
# for setting UNIX socket for communicating with cgid.
#
#Scriptsock            /var/run/cgisock
</IfModule>

#
# "/srv/www/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
#<Directory "/srv/www/cgi-bin">
#    AllowOverride None
#    Options +ExecCGI -Includes
#    Order allow,deny
#    Allow from all
#</Directory>

#
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar

#
# Directives controlling the display of server-generated directory listings.
#

#
# IndexOptions: Controls the appearance of server-generated directory
# listings.
#
#IndexOptions FancyIndexing VersionSort

#
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions.  These are only displayed for
# FancyIndexed directories.
#
#AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
#
#AddIconByType (TXT,/icons/text.gif) text/*
#AddIconByType (IMG,/icons/image2.gif) image/*
#AddIconByType (SND,/icons/sound2.gif) audio/*
#AddIconByType (VID,/icons/movie.gif) video/*
#
#AddIcon /icons/binary.gif .bin .exe
#AddIcon /icons/binhex.gif .hqx
#AddIcon /icons/tar.gif .tar
#AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
#AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
#AddIcon /icons/a.gif .ps .ai .eps
#AddIcon /icons/layout.gif .html .shtml .htm .pdf
#AddIcon /icons/text.gif .txt
#AddIcon /icons/c.gif .c
#AddIcon /icons/p.gif .pl .py
#AddIcon /icons/f.gif .for
#AddIcon /icons/dvi.gif .dvi
#AddIcon /icons/uuencoded.gif .uu
#AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
#AddIcon /icons/tex.gif .tex
#AddIcon /icons/bomb.gif core
#
#AddIcon /icons/back.gif ..
#AddIcon /icons/hand.right.gif README
#AddIcon /icons/folder.gif ^^DIRECTORY^^
#AddIcon /icons/blank.gif ^^BLANKICON^^

#
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
#
#DefaultIcon /icons/unknown.gif

#
# AddDescription allows you to place a short description after a file in
# server-generated indexes.  These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz

#
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
#
# HeaderName is the name of a file which should be prepended to
# directory indexes. 
#ReadmeName README.html
#HeaderName HEADER.html

#
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing.  Shell-style wildcarding is permitted.
#
#IndexIgnore .??* *~ *# HEADER*   RCS CVS *,v *,t

#
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz

#
# DefaultLanguage and AddLanguage allows you to specify the language of 
# a document. You can then use content negotiation to give a browser a 
# file in a language the user can understand.
#
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will 
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
#
# * It is generally better to not mark a page as 
# * being a certain language than marking it with the wrong
# * language!
#
# DefaultLanguage nl
#
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
#
# Note 2: The example entries below illustrate that in some cases 
# the two character 'Language' abbreviation is not identical to 
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
#
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
#
# Danish (da) - Dutch (nl) - English (en) - Estonian (et)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Norwegian (no) - Norwegian Nynorsk (nn) - Korean (ko) 
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru) - Croatian (hr)
#
#AddLanguage da .dk
#AddLanguage nl .nl
#AddLanguage en .en
#AddLanguage et .et
#AddLanguage fr .fr
#AddLanguage de .de
#AddLanguage he .he
#AddLanguage el .el
#AddLanguage it .it
#AddLanguage ja .ja
#AddLanguage pl .po
#AddLanguage ko .ko
#AddLanguage pt .pt
#AddLanguage nn .nn
#AddLanguage no .no
#AddLanguage pt-br .pt-br
#AddLanguage ltz .ltz
#AddLanguage ca .ca
#AddLanguage es .es
#AddLanguage sv .se
#AddLanguage cz .cz
#AddLanguage ru .ru
#AddLanguage tw .tw
#AddLanguage zh-tw .tw
#AddLanguage hr .hr

#
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
#
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
#
#LanguagePriority en da nl et fr de el it ja ko no pl pt pt-br ltz ca es sv tw

#
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
#
#ForceLanguagePriority Prefer Fallback

#
# Specify a default charset for all pages sent out. This is
# always a good idea and opens the door for future internationalisation
# of your web site, should you ever want it. Specifying it as
# a default does little harm; as the standard dictates that a page
# is in iso-8859-1 (latin1) unless specified otherwise i.e. you
# are merely stating the obvious. There are also some security
# reasons in browsers, related to javascript and URL parsing
# which encourage you to always set a default char set.
#
AddDefaultCharset ISO-8859-1

#
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See ftp://ftp.isi.edu/in-notes/iana/assignments/character-sets for
# the official list of charset names and their respective RFCs
#
#AddCharset ISO-8859-1  .iso8859-1  .latin1
#AddCharset ISO-8859-2  .iso8859-2  .latin2 .cen
#AddCharset ISO-8859-3  .iso8859-3  .latin3
#AddCharset ISO-8859-4  .iso8859-4  .latin4
#AddCharset ISO-8859-5  .iso8859-5  .latin5 .cyr .iso-ru
#AddCharset ISO-8859-6  .iso8859-6  .latin6 .arb
#AddCharset ISO-8859-7  .iso8859-7  .latin7 .grk
#AddCharset ISO-8859-8  .iso8859-8  .latin8 .heb
#AddCharset ISO-8859-9  .iso8859-9  .latin9 .trk
#AddCharset ISO-2022-JP .iso2022-jp .jis
#AddCharset ISO-2022-KR .iso2022-kr .kis
#AddCharset ISO-2022-CN .iso2022-cn .cis
#AddCharset Big5        .Big5       .big5
# For russian, more than one charset is used (depends on client, mostly):
#AddCharset WINDOWS-1251 .cp-1251   .win-1251
#AddCharset CP866       .cp866
#AddCharset KOI8-r      .koi8-r .koi8-ru
#AddCharset KOI8-ru     .koi8-uk .ua
#AddCharset ISO-10646-UCS-2 .ucs2
#AddCharset ISO-10646-UCS-4 .ucs4
#AddCharset UTF-8       .utf8

# The set below does not map to a specific (iso) standard
# but works on a fairly wide range of browsers. Note that
# capitalization actually matters (it should not, but it
# does for some browsers).
#
# See ftp://ftp.isi.edu/in-notes/iana/assignments/character-sets
# for a list of sorts. But browsers support few.
#
#AddCharset GB2312      .gb2312 .gb 
#AddCharset utf-7       .utf7
#AddCharset utf-8       .utf8
#AddCharset big5        .big5 .b5
#AddCharset EUC-TW      .euc-tw
#AddCharset EUC-JP      .euc-jp
#AddCharset EUC-KR      .euc-kr
#AddCharset shift_jis   .sjis

#
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
#
AddType application/x-tar .tgz
AddType image/x-icon .ico

#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi

#
# For files that include their own HTTP headers:
#
#AddHandler send-as-is asis

#
# For server-parsed imagemap files:
#
#AddHandler imap-file map

#
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
#  to be distributed in multiple languages.)
#
#AddHandler type-map var

#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml

#
# PHP 4.x:
#
<IfModule mod_php4.c>
AddType application/x-httpd-php .php
# AddType application/x-httpd-php .php4
AddType application/x-httpd-php-source .phps
</IfModule>

#
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# Putting this all together, we can internationalize error responses.
#
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections.  We use 
# includes to substitute the appropriate text.
#
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line:
#
#   Alias /error/include/ "/your/include/path/"
#
# which allows you to create your own set of files by starting with the
# /usr/share/apache2/error/include/ files and copying them to /your/include/path/, 
# even on a per-VirtualHost basis.  The default include files will display
# your Apache version number and your ServerAdmin email address regardless
# of the setting of ServerSignature.
#
# The internationalized error documents require mod_alias, mod_include
# and mod_negotiation.  To activate them, uncomment the following 30 lines.
#
#Alias /error/ "/usr/share/apache2/error/"
#
#<IfModule mod_negotiation.c>
#<IfModule mod_include.c>
#    <Directory "/usr/share/apache2/error">
#        AllowOverride None
#        Options IncludesNoExec
#        AddOutputFilter Includes html
#        AddHandler type-map var
#        Order allow,deny
#        Allow from all
#        LanguagePriority en de es fr it nl sv
#        ForceLanguagePriority Prefer Fallback
#    </Directory>
#    
#    ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
#    ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
#    ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
#    ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
#    ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
#    ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
#    ErrorDocument 410 /error/HTTP_GONE.html.var
#    ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
#    ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
#    ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
#    ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
#    ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var
#    ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
#    ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
#    ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
#    ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
#    ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
#</IfModule>
#</IfModule>


#
# The following directives modify normal HTTP response behavior to
# handle known problems with browser implementations.
#
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4.0" force-response-1.0
BrowserMatch "Java/1.0" force-response-1.0
BrowserMatch "JDK/1.0" force-response-1.0

#
# The following directive disables redirects on non-GET requests for
# a directory that does not include the trailing slash.  This fixes a 
# problem with Microsoft WebFolders which does not appropriately handle 
# redirects for folders with DAV methods.
# Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
#
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
BrowserMatch "^gnome-vfs" redirect-carefully

#
# Allow server status reports generated by mod_status,
# with the URL of http://servername/server-status
#
#<IfDefine STATUS>
#    <IfModule mod_status.c>
#	<Location /server-status>
#	SetHandler server-status
#	Order deny,allow
#	Deny from all
#	Allow from localhost
#	</Location>
#    </IfModule>
#</IfDefine>


#
# Allow remote server configuration reports, with the URL of
#  http://servername/server-info (requires that mod_info.c be loaded).
#
#<IfDefine INFO>
#    <IfModule mod_info.c>
#	<Location /server-info>
#	    SetHandler server-info
#	    Order deny,allow
#	    Deny from all
#	    Allow from localhost
#	</Location>
#    </IfModule>
#</IfDefine>


#
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#
#<IfModule mod_proxy.c>
#ProxyRequests On
#
#<Proxy *>
#    Order deny,allow
#    Deny from all
#    Allow from .example.com
#</Proxy>

#
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
#
#ProxyVia On

#
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
#
#CacheRoot "/var/cache/apache2"
#CacheSize 5
#CacheGcInterval 4
#CacheMaxExpire 24
#CacheLastModifiedFactor 0.1
#CacheDefaultExpire 1
#NoCache a-domain.com another-domain.edu joes.garage-sale.com

#</IfModule>
# End of proxy directives.

#
# Bring in additional module-specific configurations
#
<IfModule mod_ssl.c>
    Include /etc/apache2/ssl.conf
</IfModule>


### Section 3: Virtual Hosts
#
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at 
# <URL:http://httpd.apache.org/docs-2.0/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
#NameVirtualHost *

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#
#<VirtualHost *>
#    ServerAdmin webmaster@dummy-host.example.com
#    DocumentRoot /www/docs/dummy-host.example.com
#    ServerName dummy-host.example.com
#    ErrorLog /var/log/apache2/dummy-host.example.com-error_log
#    CustomLog /var/log/apache2/dummy-host.example.com-access_log common
#</VirtualHost>

#
# Include all *.conf files from /etc/apache2/conf.d/.
#
# This is mostly meant as a place for other RPM package to drop in their
# configuration snippet.
#
Include /etc/apache2/conf.d/*.conf


# Note:
#
# The file that is included below is generated by SuSEconfig.
#
# In this file, SuSEconfig puts Include statements it finds
# in /etc/apache2/modules/* (lines with "File:..." or "Include:...").
# If such a module file also contains a "Variable:..." statement, the settings
# in /etc/sysconfig/apache2 will be honored.
#
# In addition, any files listed in the APACHE_CONF_INCLUDE_FILES variable
# in /etc/sysconfig/apache2 will be included here by SuSEconfig.
# This allows you to add e.g. VirtualHost statements without touching
# /etc/apache2/httpd.conf itself, which usually makes upgrading a lot easier.

Include /etc/apache2/suse_include.conf


#
# WEB-GEAR ADDITIONAL CONFIGURATION
#

# Output compression before sent

AddOutputFilterByType DEFLATE text/html text/plain text/xml

# Include Web-Gear Virtual Hosts

Include /etc/webgear/vhosts.conf

# Include Web-Gear Users Virtual Hosts

Include /etc/webgear/vhosts_users.conf