RootForum Community

Resources for System-Administrators
https://www.rootforum.org/forum/

1und1 Root Server startet nicht mehr die xte...

https://www.rootforum.org/forum/viewtopic.php?t=18376

Page 1 of 1

1und1 Root Server startet nicht mehr die xte...

Posted: 2003-10-23 11:14
by bfeser
Hallo,
ich habe seit Juli einen Root-Sever Start bei 1und1. Nachdem ich es eine Zeitlang liegen lassen habe, habe ich mich nun daran gemacht, Typo3 zu installieren, hat alles wunderbar funktioniert. Die erste Website ist fast fertig. Gestern nun habe ich in der httpd.conf einen Zusatz eingebaut. Dann habe ich, weil noch nie gemacht, das System über das 1und1-Config-Menu neu gestartet und komme seither nicht mehr rein. Ich habe nun die Ã?nderung nach einem rescue boot in der httpd.conf rückgängig gemacht, aber das scheint der Fehler nicht gewesen zu sein, denn der Server meldet sich nach Normal-Boot immer noch nicht. Ich habe die Log-Files überprüft und finde keinen Fehler. Die Hotline hilft mir auch nicht weiter. Ich habe das Forum hier durchforstet und diverse Tips versucht.
Ein httpd restart bracht eine Fehlemeldung "failed to resolve....". Den Tip habe ich auch befolgt und die IP eingetragen danach gab es mit httpd restart keine Fehlermeldung mehr. Ach ja, ich habe den KK noch nicht durchgeführt, da ich erst die Site komplett lauffähig haben muss.

Ich bin schier am verzweifeln, und weiss mir nicht weiter zu hefen. Soooo tief gehen meine Linux-Kenntnisse (noch) nicht. Es hat eine Menge Nerven gekostet, Typo3 mit allen notwendigen Optionen perfekt zum Laufen zu bringen und auch die Typo3sache war nicht ohne. Würde ungern den Server in den Ausgagszustand zurückversetzen lassen, da ich noch keine Datensicherung gemacht habe. Und die Zeit drängt...

Ist es unverschämt anzufragen, ab einer von Euch Linux-Cracks mit meinen Zugangsdaten mal versucht das Ding wieder zum Laufen zu bringen? Ich glaube nicht, das es eine grössere Sache ist. Würde mich auf irgend eine Art gerne erkenntlich zeigen.

Bitte bitte helft mir (heul....)

Gruß Bernd

Re: 1und1 Root Server startet nicht mehr die xte...

Posted: 2003-10-23 11:17
by captaincrunch
Probier's mal herimit : http://www.rootforum.org/faq/index.php? ... 39&lang=de

Re: 1und1 Root Server startet nicht mehr die xte...

Posted: 2003-10-23 11:18
by jtb
Bitte genaue Fehlermeldung und Auszug aus dem error_log
Ansonsten spiel dein Backup der apache-config ein..

Re: 1und1 Root Server startet nicht mehr die xte...

Posted: 2003-10-23 11:35
by bfeser
CaptainCrunch wrote:Probier's mal herimit : http://www.rootforum.org/faq/index.php? ... 39&lang=de
Ja, das habe ich schon gemacht, ohne positives Ergebnis.
Jtb wrote:Bitte genaue Fehlermeldung und Auszug aus dem error_log
Ansonsten spiel dein Backup der apache-config ein..
Ich krieg ja keine Fehlermeldung. Der Server lässt sich nicht anpingen und Putty kriegt auch keinen Kontakt. Nur im Rescue Modus.

Die letzten Einträge im error_log:

Code: Select all

[Wed Oct 22 17:06:17 2003] [error] [client 62.227.140.23] File does not exist: /home/www/web1/html/templates/subSilver/images/
cellpic1.gif
[Thu Oct 23 00:48:27 2003] [alert] mod_unique_id: unable to gethostbyname("rescue")
[Thu Oct 23 01:15:54 2003] [alert] mod_unique_id: unable to gethostbyname("rescue")
[Thu Oct 23 10:27:51 2003] [notice] Apache/1.3.26 (Linux/SuSE) mod_ssl/2.8.10 OpenSSL/0.9.6g PHP/4.2.2 configured -- resuming
normal operations
[Thu Oct 23 10:27:51 2003] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
:
Komisch dass der erste Eintrag noch vom funktionierenden System stammt, und dann trotz vieler reboots/rescue so wenig Meldungen drin stehen
Gruss Bernd

Re: 1und1 Root Server startet nicht mehr die xte...

Posted: 2003-10-23 11:46
by captaincrunch
Die Apache-Logs sind für dein Problem erst mal komplett uninteressant, wichtig wären die Systemmeldungen (/var/log/messages) des normalen Systems, also im Rescue erst die Platten mounten.

Re: 1und1 Root Server startet nicht mehr die xte...

Posted: 2003-10-23 11:51
by bmp
bfeser wrote:Ich krieg ja keine Fehlermeldung. Der Server lässt sich nicht anpingen und Putty kriegt auch keinen Kontakt. Nur im Rescue Modus.
Hallo Bernd,

was sagt denn die boot.log und boot.msg ?
Ich tippe auch auf den VIA Netzwerkkarten Fehler.
Sprich es wird der falsche Kernel geladen.

Re: 1und1 Root Server startet nicht mehr die xte...

Posted: 2003-10-23 12:10
by bfeser
OK, also erstaml die letzten /var/log/messages:

Code: Select all

Oct 23 10:27:35 p15138416 syslogd 1.4.1: restart.
Oct 23 10:27:36 p15138416 sshd[365]: Server listening on 0.0.0.0 port 22.
Oct 23 10:27:40 p15138416 kernel: klogd 1.4.1, log source = /proc/kmsg started.
Oct 23 10:27:40 p15138416 kernel: Inspecting /boot/System.map-2.4.19-4GB
Oct 23 10:27:40 p15138416 kernel: Loaded 21206 symbols from /boot/System.map-2.4.19-4GB.
Oct 23 10:27:40 p15138416 kernel: Symbols match kernel version 2.4.19.
Oct 23 10:27:40 p15138416 kernel: Loaded 49 symbols from 2 modules.
Oct 23 10:27:45 p15138416 xinetd[489]: xinetd Version 2.3.6 started with libwrap loadavg options compiled in.
Oct 23 10:27:45 p15138416 xinetd[489]: Started working: 3 available services
Oct 23 10:27:46 p15138416 ntpdate[503]: can't find host ptbtime1.ptb.de
Oct 23 10:27:46 p15138416 ntpdate[503]: can't find host ptbtime2.ptb.de
Oct 23 10:27:46 p15138416 ntpdate[503]: no servers can be used, exiting
Oct 23 10:27:46 p15138416 ntpd[506]: ntpd 4.1.1@1.786 Tue Feb  4 16:39:46 UTC 2003 (1)
Oct 23 10:27:46 p15138416 ntpd[506]: signal_no_reset: signal 13 had flags 4000000
Oct 23 10:27:46 p15138416 ntpd[506]: precision = 16 usec
Oct 23 10:27:46 p15138416 ntpd[506]: kernel time discipline status 0040
Oct 23 10:27:50 p15138416 /usr/sbin/cron[555]: (CRON) STARTUP (fork ok)
Oct 23 10:27:51 p15138416 init: cannot execute "/usr/local/bin/getty-wrapper"
Oct 23 10:27:51 p15138416 last message repeated 9 times
Oct 23 10:27:51 p15138416 init: Id "T0" respawning too fast: disabled for 5 minutes
Oct 23 10:27:51 p15138416 init: cannot execute "/usr/local/bin/getty-wrapper"
Oct 23 10:27:51 p15138416 last message repeated 9 times
Oct 23 10:27:51 p15138416 init: Id "T1" respawning too fast: disabled for 5 minutes
Oct 23 10:28:00 p15138416 /USR/SBIN/CRON[615]: (root) CMD (/root/confixx/confixx_counterscript.pl)
Oct 23 10:29:00 p15138416 /USR/SBIN/CRON[628]: (root) CMD (/root/confixx/confixx_counterscript.pl)
Oct 23 10:30:00 p15138416 /USR/SBIN/CRON[634]: (root) CMD (/root/confixx/confixx_counterscript.pl)
Oct 23 10:30:12 p15138416 syslogd 1.4.1: restart.
Oct 23 10:30:13 p15138416 run-crons[635]: logrotate returned 1
Oct 23 10:30:14 p15138416 su: (to nobody) root on none
Oct 23 10:30:14 p15138416 su: pam_unix2: session started for user nobody, service su
Oct 23 10:30:35 p15138416 su: pam_unix2: session finished for user nobody, service su
Oct 23 10:31:00 p15138416 /USR/SBIN/CRON[787]: (root) CMD (/root/confixx/confixx_counterscript.pl)
Oct 23 10:32:00 p15138416 /USR/SBIN/CRON[791]: (root) CMD (/root/confixx/confixx_counterscript.pl)
Oct 23 10:32:52 p15138416 init: cannot execute "/usr/local/bin/getty-wrapper"
Oct 23 10:32:52 p15138416 last message repeated 15 times
Oct 23 10:32:52 p15138416 init: Id "T1" respawning too fast: disabled for 5 minutes
Oct 23 10:32:52 p15138416 init: cannot execute "/usr/local/bin/getty-wrapper"
Oct 23 10:32:52 p15138416 last message repeated 3 times
Oct 23 10:32:52 p15138416 init: Id "T0" respawning too fast: disabled for 5 minutes
Oct 23 10:33:00 p15138416 /USR/SBIN/CRON[821]: (root) CMD (/root/confixx/confixx_counterscript.pl)
Oct 23 10:34:00 p15138416 /USR/SBIN/CRON[825]: (root) CMD (/root/confixx/confixx_counterscript.pl)
Oct 23 10:35:00 p15138416 /USR/SBIN/CRON[837]: (root) CMD (/root/confixx/confixx_counterscript.pl)
Oct 23 10:36:00 p15138416 /USR/SBIN/CRON[841]: (root) CMD (/root/confixx/confixx_counterscript.pl)
Oct 23 10:37:00 p15138416 /USR/SBIN/CRON[853]: (root) CMD (/root/confixx/confixx_counterscript.pl)
Oct 23 10:37:53 p15138416 init: cannot execute "/usr/local/bin/getty-wrapper"
Oct 23 10:37:53 p15138416 last message repeated 14 times
Oct 23 10:37:53 p15138416 init: Id "T0" respawning too fast: disabled for 5 minutes
Oct 23 10:37:53 p15138416 init: cannot execute "/usr/local/bin/getty-wrapper"
Oct 23 10:37:53 p15138416 last message repeated 4 times
Oct 23 10:37:53 p15138416 init: Id "T1" respawning too fast: disabled for 5 minutes
Oct 23 10:38:00 p15138416 /USR/SBIN/CRON[877]: (root) CMD (/root/confixx/confixx_counterscript.pl)
Oct 23 10:39:00 p15138416 /USR/SBIN/CRON[889]: (root) CMD (/root/confixx/confixx_counterscript.pl)
Oct 23 10:40:00 p15138416 /USR/SBIN/CRON[893]: (root) CMD (/root/confixx/confixx_counterscript.pl)
(END)
Und nun das boot_msg: (sorry sehr lang)

Code: Select all

done<notice>killproc: kill(26,29)
Restore device permissions
done

Activating remaining swap-devices in /etc/fstab...


doneMounting shared memory FS on /dev/shm
done

Setting up the CMOS clock
done

Setting up linker cache (/etc/ld.so.cache) using ldconfig
done

Setting up timezone data
done

Setting up hostname 'p15138416'
done

Setting up loopback interface
done

Cleaning up using /sbin/modify_resolvconf:

restored /etc/resolv.conf from /etc/resolv.conf.saved.by.dhcpcd


done

Disabling IP forwarding
done

Running /etc/init.d/boot.local


done<notice>killproc: kill(26,3)

Boot logging started on /dev/tty1(/dev/console) at Thu Oct 23 10:27:34 2003

Master Resource Control: previous runlevel: N, switching to runlevel:
3

<notice>/etc/init.d/rc3.d/S01random start
Initializing random number generator
done

<notice>'/etc/init.d/rc3.d/S01random start' exits with status 0
<notice>/etc/init.d/rc3.d/S05network start
Setting up network interfaces:

    lo
done

    eth0      ifup: Could not get a valid interface name: -> skipped


failed

<notice>'/etc/init.d/rc3.d/S05network start' exits with status 0
<notice>/etc/init.d/rc3.d/S06syslog start
Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd ], [ CONSOLE=/dev/console TERM=linux SHELL=/
bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3
PWD=/ PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh INIT_VERSION=
sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LI
NES=25 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/sbin/klogd ]

done

<notice>'/etc/init.d/rc3.d/S06syslog start' exits with status 0
<notice>/etc/init.d/rc3.d/S07sshd start
Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin
/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD
=/ PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]

done

<notice>'/etc/init.d/rc3.d/S07sshd start' exits with status 0
<notice>/etc/init.d/rc3.d/S08postfix start
Starting mail service (Postfix)
done

<notice>'/etc/init.d/rc3.d/S08postfix start' exits with status 0
<notice>/etc/init.d/rc3.d/S09mysql start
Starting service MySQL

Starting mysqld daemon with databases from /var/lib/mysql


done

<notice>'/etc/init.d/rc3.d/S09mysql start' exits with status 0
<notice>/etc/init.d/rc3.d/S09rpmconfigcheck start
Searching for unresolved configuration files
done

<notice>'/etc/init.d/rc3.d/S09rpmconfigcheck start' exits with status 0
<notice>/etc/init.d/rc3.d/S09xinetd start
Starting INET services. (xinetd)<notice>startproc: execve (/usr/sbin/xinetd) [ /usr/sbin/xinetd -reuse ], [ CONSOLE=/dev/conso
le TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin
:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/xinetd ]

done

<notice>'/etc/init.d/rc3.d/S09xinetd start' exits with status 0
<notice>/etc/init.d/rc3.d/S09xntpd start
Try to get initial date and time via NTP from  ptbtime1.ptb.de ptbtime2.ptb.de
failed

Starting network time protocol daemon (NTPD)<notice>startproc: execve (/usr/sbin/ntpd) [ /usr/sbin/ntpd -U ntp ], [ CONSOLE=/d
ev/console TERM=linux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/
usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/ntpd ]

done

<notice>'/etc/init.d/rc3.d/S09xntpd start' exits with status 0
<notice>/etc/init.d/rc3.d/S11apache start
Starting httpd [ PHP4 SSL ]<notice>startproc: execve (/usr/sbin/httpd) [ /usr/sbin/httpd -f /etc/httpd/httpd.conf -D SSL ], [
CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LD_LIBRARY_PATH=:/lib:/usr/lib/SunJava2-1.3/jre/lib/i386:/usr/lib/SunJava2-1.3/j
re/lib/i386/client:/usr/lib/SunJava2-1.3/jre/lib/i386/native_threads INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=80
PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=25 DBROOT=/dev/null HOME=/ SHLVL=2 ORACL
E_HOME= _=/sbin/startproc DAEMON=/usr/sbin/httpd ]

done

<notice>'/etc/init.d/rc3.d/S11apache start' exits with status 0
<notice>/etc/init.d/rc3.d/S11atd start
Starting service at daemon<notice>startproc: execve (/usr/sbin/atd) [ /usr/sbin/atd ], [ CONSOLE=/dev/console TERM=linux SHELL
=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=
3 PWD=/ PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/atd ]

done

<notice>'/etc/init.d/rc3.d/S11atd start' exits with status 0
<notice>/etc/init.d/rc3.d/S11cron start
Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console TERM=linux SHELL=/bi
n/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 PW
D=/ PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/cron ]

done

<notice>'/etc/init.d/rc3.d/S11cron start' exits with status 0
<notice>/etc/init.d/rc3.d/S11nscd start
Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=l
inux SHELL=/bin/sh INIT_VERSION=sysvinit-2.82 REDIRECT=/dev/tty1 COLUMNS=80 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin
 RUNLEVEL=3 PWD=/ PREVLEVEL=N LINES=25 HOME=/ SHLVL=2 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]

done

Master Resource Control: runlevel 3 has been
reached

<notice>'/etc/init.d/rc3.d/S11nscd start' exits with status 0
<notice>killproc: kill(256,3)
**************   dies etwa 20 mal hintereinander ***********
INIT: cannot execute "/usr/local/bin/getty-wrapper"
*****************************************************
INIT: Id "T1" respawning too fast: disabled for 5 minutes
(END)
und zu guter letzt die boot.omsg:

Code: Select all

:47 CEST 2003
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000000f7f0000 (usable)
<4> BIOS-e820: 000000000f7f0000 - 000000000f7f3000 (ACPI NVS)
<4> BIOS-e820: 000000000f7f3000 - 000000000f800000 (ACPI data)
<4> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
<5>0MB HIGHMEM available.
<5>247MB LOWMEM available.
<4>found SMP MP-table at 000f4ec0
<4>hm, page 000f4000 reserved twice.
<4>hm, page 000f5000 reserved twice.
<4>hm, page 000f0000 reserved twice.
<4>hm, page 000f1000 reserved twice.
<4>On node 0 totalpages: 63472
<4>zone(0): 4096 pages.
<4>zone(1): 59376 pages.
<4>zone(2): 0 pages.
<6>ACPI: Searched entire block, no RSDP was found.
<6>ACPI: RSDP located at physical address c00f6860
<6>RSD PTR  v0 [VIAP4M]
<4>__va_range(0xf7f3000, 0x68): idx=8 mapped at ffff6000
<6>ACPI table found: RSDT v1 [VIAP4M AWRDACPI 16944.11825]
<4>__va_range(0xf7f3040, 0x24): idx=8 mapped at ffff6000
<4>__va_range(0xf7f3040, 0x74): idx=8 mapped at ffff6000
<6>ACPI table found: FACP v1 [VIAP4M AWRDACPI 16944.11825]
<4>__va_range(0xf7f6c80, 0x24): idx=8 mapped at ffff6000
<4>__va_range(0xf7f6c80, 0x68): idx=8 mapped at ffff6000
<6>ACPI table found: APIC v1 [VIAP4M AWRDACPI 16944.11825]
<4>__va_range(0xf7f6c80, 0x68): idx=8 mapped at ffff6000
<6>LAPIC (acpi_id[0x0000] id[0x0] enabled[1])
<6>CPU 0 (0x0000) enabledProcessor #0 Pentium 4(tm) XEON(tm) APIC version 16
<4>
<6>LAPIC (acpi_id[0x0001] id[0x1] enabled[0])
<6>CPU 1 (0x0100) disabled
<6>IOAPIC (id[0x2] address[0xfec00000] global_irq_base[0x0])
<6>INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0])
<6>INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x3] trigger[0x3])
<6>LAPIC_NMI (acpi_id[0x0000] polarity[0x1] trigger[0x1] lint[0x1])
<6>LAPIC_NMI (acpi_id[0x0000] polarity[0x1] trigger[0x1] lint[0x1])
<6>2 CPUs total
<6>Local APIC address fee00000
<4>Enabling the CPU's according to the ACPI table
<4>Intel MultiProcessor Specification v1.4
<4>    Virtual Wire compatibility mode.
<4>OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
<4>I/O APIC #2 Version 17 at 0xFEC00000.
<4>Enabling APIC mode: Flat.    Using 1 I/O APICs
<4>Processors: 1
<4>Kernel command line: root=/dev/hda3
<6>Initializing CPU#0
<4>Detected 2003.459 MHz processor.
<4>Console: colour VGA+ 80x25
<4>Calibrating delay loop... 3997.69 BogoMIPS
<6>Memory: 248060k/253888k available (1313k kernel code, 5444k reserved, 428k data, 272k init, 0k highmem)
<6>Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
<6>Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
<6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
<4>Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
<4>Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 128K
<6>CPU: Hyper-Threading is disabled
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU:     After generic, caps: bfebfbff 00000000 00000000 00000000
<7>CPU:             Common caps: bfebfbff 00000000 00000000 00000000
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 128K
<6>CPU: Hyper-Threading is disabled
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU:     After generic, caps: bfebfbff 00000000 00000000 00000000
<7>CPU:             Common caps: bfebfbff 00000000 00000000 00000000
<4>CPU0: Intel(R) Celeron(R) CPU 2.00GHz stepping 07
<4>per-CPU timeslice cutoff: 365.70 usecs.
<4>enabled ExtINT on CPU#0
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<3>Error: only one processor found.
<4>ENABLING IO-APIC IRQs
<4>Setting 2 in the phys_id_present_map
<6>...changing IO-APIC physical APIC ID to 2 ... ok.
<7>init IO_APIC IRQs
<7> IO-APIC (apicid-pin) 2-0, 2-5, 2-11, 2-12, 2-17, 2-18, 2-19, 2-20, 2-22 not connected.
<6>..TIMER: vector=0x31 pin1=2 pin2=0
<7>number of MP IRQ sources: 19.
<7>number of IO-APIC #2 registers: 24.
<6>testing the IO APIC.......................
<4>
<7>IO APIC #2......
<7>.... register #00: 02000000
<7>.......    : physical APIC id: 02
<7>.......    : Delivery Type: 0
<7>.......    : LTS          : 0
<7>.... register #01: 00178003
<7>.......     : max redirection entries: 0017
<7>.......     : PRQ implemented: 1
<7>.......     : IO APIC version: 0003
<7>.... IRQ redirection table:
<7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
<7> 00 000 00  1    0    0   0   0    0    0    00
<7> 01 001 01  0    0    0   0   0    1    1    39
<7> 02 001 01  0    0    0   0   0    1    1    31
<7> 03 001 01  0    0    0   0   0    1    1    41
<7> 04 001 01  0    0    0   0   0    1    1    49
<7> 05 000 00  1    0    0   0   0    0    0    00
<7> 06 001 01  0    0    0   0   0    1    1    51
<7> 07 001 01  0    0    0   0   0    1    1    59
<7> 08 001 01  0    0    0   0   0    1    1    61
<7> 09 001 01  0    0    0   0   0    1    1    69
<7> 0a 001 01  0    0    0   0   0    1    1    71
<7> 0b 000 00  1    0    0   0   0    0    0    00
<7> 0c 000 00  1    0    0   0   0    0    0    00
<7> 0d 001 01  0    0    0   0   0    1    1    79
<7> 0e 001 01  0    0    0   0   0    1    1    81
<7> 0f 001 01  1    1    0   1   0    1    1    89
<7> 10 001 01  1    1    0   1   0    1    1    91
<7> 11 000 00  1    0    0   0   0    0    0    00
<7> 12 000 00  1    0    0   0   0    0    0    00
<7> 13 000 00  1    0    0   0   0    0    0    00
<7> 14 000 00  1    0    0   0   0    0    0    00
<7> 15 001 01  1    1    0   1   0    1    1    99
<7> 16 000 00  1    0    0   0   0    0    0    00
<7> 17 001 01  1    1    0   1   0    1    1    A1
<7>IRQ to pin mappings:
<7>IRQ0 -> 0:2
<7>IRQ1 -> 0:1
<7>IRQ3 -> 0:3
<7>IRQ4 -> 0:4
<7>IRQ6 -> 0:6
<7>IRQ7 -> 0:7
<7>IRQ8 -> 0:8
<7>IRQ9 -> 0:9
<7>IRQ10 -> 0:10
<7>IRQ13 -> 0:13
<7>IRQ14 -> 0:14
<7>IRQ15 -> 0:15
<7>IRQ16 -> 0:16
<7>IRQ21 -> 0:21
<7>IRQ23 -> 0:23
<6>.................................... done.
<4>Using local APIC timer interrupts.
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 2003.4922 MHz.
<4>..... host bus clock speed is 100.1745 MHz.
<4>cpu: 0, clocks: 1001745, slice: 500872
<4>CPU0<T0:1001744,T1:500864,D:8,S:500872,C:1001745>
<4>Waiting on wait_init_idle (map = 0x0)
<4>All processors have done init_idle
<6>PCI: PCI BIOS revision 2.10 entry at 0xfb300, last bus=1
<6>PCI: Using configuration type 1
<6>PCI: Probing PCI hardware
<6>PCI: Using IRQ router default [1106/3148] at 00:00.0
<6>PCI->APIC IRQ transform: (B0,I16,P0) -> 21
<6>PCI->APIC IRQ transform: (B0,I16,P1) -> 21
<6>PCI->APIC IRQ transform: (B0,I16,P2) -> 21
<6>PCI->APIC IRQ transform: (B0,I16,P3) -> 21
<6>PCI->APIC IRQ transform: (B0,I17,P0) -> 15
<6>PCI->APIC IRQ transform: (B0,I18,P0) -> 23
<6>PCI->APIC IRQ transform: (B1,I0,P0) -> 16
<6>PCI: Via IRQ fixup for 00:10.0, from 15 to 5
<6>PCI: Via IRQ fixup for 00:10.2, from 12 to 5
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<4>Starting kswapd
<5>VFS: Diskquotas version dquot_6.4.0 initialized
<6>Journalled Block Device driver loaded
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
<4>keyboard: Timeout - AT keyboard not present?(ed)
<4>keyboard: Timeout - AT keyboard not present?(f4)
<4>keyboard: Timeout - AT keyboard not present?(f4)
<6>PCI: Using IRQ router default [1106/3148] at 00:00.0
<6>PCI->APIC IRQ transform: (B0,I16,P0) -> 21
<6>PCI->APIC IRQ transform: (B0,I16,P1) -> 21
<6>PCI->APIC IRQ transform: (B0,I16,P2) -> 21
<6>PCI->APIC IRQ transform: (B0,I16,P3) -> 21
<6>PCI->APIC IRQ transform: (B0,I17,P0) -> 15
<6>PCI->APIC IRQ transform: (B0,I18,P0) -> 23
<6>PCI->APIC IRQ transform: (B1,I0,P0) -> 16
<6>PCI: Via IRQ fixup for 00:10.0, from 15 to 5
<6>PCI: Via IRQ fixup for 00:10.2, from 12 to 5
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<4>Starting kswapd
<5>VFS: Diskquotas version dquot_6.4.0 initialized
<6>Journalled Block Device driver loaded
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
<4>keyboard: Timeout - AT keyboard not present?(ed)
<4>keyboard: Timeout - AT keyboard not present?(f4)
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>Real Time Clock Driver v1.10e
<6>Intel(R) PRO/1000 Network Driver - version 5.0.43-k1
<6>Copyright (c) 1999-2003 Intel Corporation.
<6>via-rhine.c:v1.10-LK1.1.17  March-1-2003  Written by Donald Becker
<6>  http://www.scyld.com/network/via-rhine.html
<6>eth0: VIA VT6102 Rhine-II at 0xe000, 00:40:63:c7:ad:e7, IRQ 23.
<6>eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>VP_IDE: IDE controller at PCI slot 00:11.1
<6>VP_IDE: chipset revision 6
<6>VP_IDE: not 100%% native mode: will probe irqs later
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
<6>    ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:pio
<4>hda: IC35L040AVVA07-0, ATA DISK drive
<4>blk: queue c0348d00, I/O limit 4095Mb (mask 0xffffffff)
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>hda: attached ide-disk driver.
<4>hda: host protected area => 1
<6>hda: 80418240 sectors (41174 MB) w/1863KiB Cache, CHS=5005/255/63, UDMA(100)
<6>Partition check:
<6> hda: hda1 hda2 hda3
<6>SCSI subsystem driver Revision: 1.00
<6>Red Hat/Adaptec aacraid driver, Jul  4 2003
<4>3ware Storage Controller device driver for Linux v1.02.00.032.
<4>3w-xxxx: No cards found.
<3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<6>IP: routing cache hash table of 2048 buckets, 16Kbytes
<6>TCP: Hash tables configured (established 16384 bind 16384)
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<6>kjournald starting.  Commit interval 5 seconds
<6>EXT3-fs: mounted filesystem with ordered data mode.
<4>VFS: Mounted root (ext3 filesystem) readonly.
<6>Freeing unused kernel memory: 272k freed
<6>Adding Swap: 787176k swap-space (priority 42)
<6>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
<6>kjournald starting.  Commit interval 5 seconds
<6>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
(END)
Ich hoffe nur dass ihr was findet. Mein Kunde steht mir ganz schön im Kreuz....

Re: 1und1 Root Server startet nicht mehr die xte...

Posted: 2003-10-23 12:21
by jtb
eth0 ifup: Could not get a valid interface name: -> skipped
Wie sieht deine Interface-Config aus?

Re: 1und1 Root Server startet nicht mehr die xte...

Posted: 2003-10-23 12:25
by bmp

Code: Select all

Setting up network interfaces: 
    lo 
done 
    eth0      ifup: Could not get a valid interface name: -> skipped 

failed
Da ist es doch.
Kein eth0 kein Netzwerk !

Re: 1und1 Root Server startet nicht mehr die xte...

Posted: 2003-10-23 12:29
by bfeser
Da ist es doch.
Kein eth0 kein Netzwerk !
Wie sieht deine Interface-Config aus?
Wo find ich die Interface-config

und was muss ich ändern damit eine "valid-interface-name gefunden wird"?

Re: 1und1 Root Server startet nicht mehr die xte...

Posted: 2003-10-23 12:37
by bmp
bfeser wrote: Wo find ich die Interface-config

und was muss ich ändern damit eine "valid-interface-name gefunden wird"?
Wenn du Suse hast unter YaST --> Netwerk --> Grundkonfiguration.
Eine andere Möglichkeit ist auch mal in die Datei /etc/modules.conf zu schauen, was dort überhaupt für ein alias drinsteht.

Re: 1und1 Root Server startet nicht mehr die xte...

Posted: 2003-10-23 12:52
by bfeser
Ich kann YAST nicht starten, vielleicht wegen des Rescue Modus.

in der modules.conf steht über eth0 folgendes:

Code: Select all

# alias eth0 eepro100
#alias eth0 8139too
alias eth1             off
alias tr0              off
alias scsi_hostadapter off
alias fb0              off
ist das falsch? habe da nie was geändert, wie könnte ich auch.

Wie kriege ich Yast zum laufen im rescue Modus? Normalerweise geht das, allerdings nur wenn ich mich über Putty "normal" einlogge, aber das geht ja nicht :cry:

Re: 1und1 Root Server startet nicht mehr die xte...

Posted: 2003-10-23 12:56
by captaincrunch
Die Forensuche spuckt (u.a.) folgendes aus :
http://www.rootforum.org/forum/viewtopi ... +interface

und

http://www.rootforum.org/forum/viewtopi ... c&start=15

Re: 1und1 Root Server startet nicht mehr die xte...

Posted: 2003-10-23 15:08
by bfeser
So, ich habe jetzt alles durchstöbert, auch wie beschrieben den Linux-Kernel überspielt aber den Netztwerkkartenfehler habe ich den Fehler
Could not get a valid interface name: -> skipped
immer noch.

Ich will jetzt über Yast die Karte aktualisieren - hab aber keinen Plan, was ich da eingeben muss

unter Available are:
Other (not detected)

Allready configured devices steht:
Ethernet network card
Configured as eth0with DHCP

Muss ich jetzt unter Configure das ändern? Was muss da stehen?

Code: Select all

Networkdevice                       deviceName
Ethernet: ______________v   1_________________v

Kernel module
Module name
_______________________________________________

Options
_______________________________________________

[] PCMCIA    [] USB
All times are UTC+01:00
Page 1 of 1